Epson PowerLite Pro Cinema 6010 Quick Setup
Epson PowerLite Pro Cinema 6010 Manual
 |
View all Epson PowerLite Pro Cinema 6010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson PowerLite Pro Cinema 6010 manual content summary:
- Epson PowerLite Pro Cinema 6010 | Quick Setup - Page 1
PowerLite® Pro Cinema 6010 Quick Setup Before using the projector, make sure you read the safety instructions in the online User's Guide. Choose a location Keep the projector level and place it at a height where its lens is centered between the top and bottom of the screen. If this isn't possible, - Epson PowerLite Pro Cinema 6010 | Quick Setup - Page 2
(two AA batteries). Turn projector on Switch between 2D and 3D Access projector menus Turn projector off Choose which source to display Navigate projector menus Turn off projector display See the online User's Guide for more information on adjusting 3D images. Troubleshooting If you see a blank - Epson PowerLite Pro Cinema 6010 | Quick Setup - Page 3
received, including interference that may cause undesired operation. Trade Name: EPSON Type of Product: LCD Projector Model: H399A Marketing Name: PowerLite Pro Cinema 6010 Epson America, Inc. Limited Warranty Three-Year Projector Limited Warranty and 90-Day Lamp Limited Warranty What Is - Epson PowerLite Pro Cinema 6010 | Quick Setup - Page 4
Canada or write to Epson America, Inc., P.O. Box 93012, Long Beach, CA 90809-3012. Epson and PowerLite are registered trademarks, and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark and Epson Connection is a service mark of Epson
-
1 -
2 -
3 -
4
 |
 |
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online
User’s Guide
.
Choose a location
Keep the projector level and place it at a height where its lens is centered
between the top and bottom of the screen. If this isn’t possible, use the lens
shift dials and keystone correction buttons to reposition the image (see “Adjust
the image”).
In order to view 3D images correctly, 3D glasses must be worn within proper
range of the projector. Use the image below to determine the ideal distance for
3D projection (the shading represents the 3D viewing area):
60º
16.5 ft (5 m)
13 ft (4 m)
Use the optional external 3D emitter if the projector is located over
16.5 feet (5 m) from the viewing area. See “Optional accessories” on the back
of this sheet for ordering information, and the online
User’s Guide
for more
information on where to place your projector.
Connect the projector
Choose from the following connections. See the sections below or the online
User’s Guide
for details.
Video Device
Connect up to 4 video devices and use the
Source
buttons on the remote
control or the
button on the projector to switch between them.
Component video cable
RCA Video cable
HDMI cable
Computer
VGA cable
HDMI cable
Monitor Port
Connect one end of a VGA cable to the projector’s
PC
port, and the other end
to your computer’s
monitor port. If you are using a laptop, switch it to
external display (see “Troubleshooting”). You can also connect an audio cable.
HDMI Port
Connect one end of an HDMI cable to the projector’s
HDMI
port and the other
end to an HDMI port on your computer.
Turn on your equipment
1
Turn on your video source or computer.
2
Plug in the projector.
3
Turn on the power switch on the back of the projector.
4
Press the
power button on the projector or
On
button on the remote
control. The power
light flashes blue, and then stays on.
Note:
To shut down the projector, press the
power button on the
projector twice or the
Standby
button on the remote control, then
unplug it. You don’t have to wait for the projector to cool down.
5
The default language of the menu system is
English
. To select another
language, press the
Menu
button on the remote control. Select
Extended
and press
Enter
. Select
Language
and press
Enter
. Select your language
and press
Enter
. Press the
Menu
button to exit the menu system.
Adjust the image
1
If you don’t see an image, press the
Source
buttons on the remote
control or the
button on the projector to select the image source.
Note:
If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
2
To raise the image, adjust the front feet as shown below.
3
If necessary, turn the horizontal and vertical lens shift dials to adjust the
image position and center it between the top and bottom of the screen.
4
Turn the zoom ring to reduce or enlarge the image.
PowerLite
®
Pro Cinema 6010
*412203300*
*412203300*