Epson PowerLite Pro Cinema 6020UB Quick Start
Epson PowerLite Pro Cinema 6020UB Manual
 |
View all Epson PowerLite Pro Cinema 6020UB manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson PowerLite Pro Cinema 6020UB manual content summary:
- Epson PowerLite Pro Cinema 6020UB | Quick Start - Page 1
PowerLite® Pro Cinema 6020UB Quick Setup Before using the projector, make sure you read the safety instructions in the online User's Guide. Choose a location Keep the projector level and place it at a height so its lens is even with the top or the bottom of the screen and is centered horizontally. - Epson PowerLite Pro Cinema 6020UB | Quick Start - Page 2
Enter. See the online User's Guide for more information on adjusting 3D images. Troubleshooting If you see a blank screen or the No signal message after turning on your video device or computer, check the following: • Make sure the power light on the projector is blue and not flashing. • Press - Epson PowerLite Pro Cinema 6020UB | Quick Start - Page 3
desktop to access the online manual (requires an Internet connection). If you don't have a User's Guide icon, you can install it from the projector CD or go to the Epson website, as described below. Telephone support services To use the EPSON® PrivateLine® Support service, call (800) 637-7661. This - Epson PowerLite Pro Cinema 6020UB | Quick Start - Page 4
may cause undesired operation. Trade Name: EPSON Type of Product: LCD Projector Model: H528A Marketing Name: PowerLite Pro Cinema 6020UB Epson America, Inc. Limited Warranty Three-Year Projector Limited Warranty, 90-Day Lamp Limited Warranty and 1-Year 3D Glasses Limited Warranty What Is
-
1 -
2 -
3 -
4
 |
 |
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online
User’s Guide
.
Choose a location
Keep the projector level and place it at a height so its lens is even with the top
or the bottom of the screen and is centered horizontally. If this isn’t possible,
use the keystone correction buttons on the projector to reposition the image
(see “Adjust the image”).
In order to view 3D images correctly, RF 3D glasses must be worn within 32 feet
(10 m) of the projector. Use the image below to determine the viewing distance
for 3D projection (the shading represents the 3D viewing area):
See the online
User’s Guide
for more information on where to place your
projector.
Connect the projector
Connect up to 5 video devices and use the
Source
buttons on the projector or
remote control to switch between them.
Component video cable
RCA video cable
HDMI cable
For additional connection types, see the online
User's Guide
.
Turn on your equipment
1
Turn on your video source.
2
Plug in the projector.
3
Turn on the power switch on the back of the projector. The
power
button on the projector turns blue.
4
Press the
power button on the projector or the
On
button on the
remote control. The power
light flashes blue, and then stays on.
Note:
To shut down the projector, press the
power button on the
projector twice or the
Standby
button on the remote control, then
unplug it. You don’t have to wait for the projector to cool down.
5
The default language of the menu system is
English
. To select another
language, press the
Menu
button on the remote control. Select
Extended
and press
Enter
. Select
Language
and press
Enter
. Select
your language and press
Enter
. Press the
Menu
button to exit the menu
system.
Adjust the image
1
If you don’t see an image, press the
Source
buttons on the remote
control or the
button on the projector to select the image source.
Note:
If you still see a blank screen or have other display problems, see
“Troubleshooting.”
2
Turn the horizontal and vertical lens shift dials to adjust the image
position and center it between the top and bottom of the screen.
3
To raise the image, adjust the front feet as shown below.
PowerLite
®
Pro Cinema 6020UB
*412379700*
*412379700*