Epson PowerLite S3 User Manual
Epson PowerLite S3 Manual
 |
View all Epson PowerLite S3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson PowerLite S3 manual content summary:
- Epson PowerLite S3 | User Manual - Page 1
Epson PowerLite S3 User's Guide - Epson PowerLite S3 | User Manual - Page 2
Notations Used in This Guide 2 Indicates procedures which may result in damage or injury if sufficient care is not taken. : [Esc] button Indicates configuration menu items. Example: "Image"- "Brightness" The terms "this unit" and "this projector" may also refer to the accessories supplied with the - Epson PowerLite S3 | User Manual - Page 3
or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions. Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than - Epson PowerLite S3 | User Manual - Page 4
Used in This Guide 2 Contents 4 Projector Features 6 Part Troubleshooting Using the Help 43 Problem Solving 45 Reading the Indicators 45 When the Indicators Provide No Help 48 Where to Get Help 56 Appendices Installation 58 Setting Up the Projector 58 Maintenance 59 Cleaning 59 Replacing - Epson PowerLite S3 | User Manual - Page 5
69 Glossary 70 List of ESC/VP21 Commands 72 Command List 72 Cable Layouts 72 List of Supported Monitor Displays 73 Specifications 74 Appearance 75 Important Safety Instructions 76 Epson America, Inc. Limited Warranty 78 Index 80 FCC Compliance Statement 82 Declaration of Conformity 82 - Epson PowerLite S3 | User Manual - Page 6
"Games," and so on, in the optimum color tone by choosing the most suitable mode for your surroundings. sp.16 6 A single foot design simplifies leveling adjustments You can easily make height adjustments with one hand. sSetup Guide The direct power on function means you can turn the projector on - Epson PowerLite S3 | User Manual - Page 7
.18 Manage users with password protect You can set up a password to restrict the use of the projector. sp.28 Operation lock stops the use of all control panel buttons except for the Power button This can prevent your settings being changed by accident or on purpose. This option is useful when - Epson PowerLite S3 | User Manual - Page 8
Front/Top • Lamp cover sp.61 Open this cover when replacing the projector's lamp. • Air exhaust vent Do not touch the exhaust vent See the Quick Setup sheet) Extend and retract to adjust the projection angle when the projector is placed on a surface such as a shelf. • Foot adjust lever (See the - Epson PowerLite S3 | User Manual - Page 9
sp.34 Displays and closes the configuration menu. • [Power] button (See the Quick Setup sheet) Turns the projector power on or off. • [ ] [ ] button sp Help] button sp.43 Displays and closes the help, which shows solutions if a problem occurs. • [Wide] [Tele] buttons sp.34 Adjusts the image size. If - Epson PowerLite S3 | User Manual - Page 10
the projector to a computer via the USBg cable when using the wireless mouse function. Computer images cannot be projected by using the USB cable to connect the computer. • Remote control light-receiving area (See the Quick Setup sheet) Receives signals from the remote control. • Power inlet - Epson PowerLite S3 | User Manual - Page 11
. • Air filter (air intake vent) sp.59, p.65 This prevents dust and other foreign particles from getting inside the projector when air is drawn in. It should be cleaned and replaced periodically. • Ceiling mount holes (3 points) sp.58, p.75 Attach the optional ceiling mount here when suspending the - Epson PowerLite S3 | User Manual - Page 12
Pointer] button sp.23 • [A/V Mute] button sp.22 • [Computer] button sp.20 • [S-Video] button sp.20 • [Video] button sp.20 • [Auto] button sp.20 • [Power] button • [ ] buttons sp.26, p.34 • [Freeze] button sp.22 • [Num] button sp.28 • [Color Mode] button sp.16 • [Menu] button sp.34 • [Resize] button - Epson PowerLite S3 | User Manual - Page 13
Adjusting and changing the image This section explains how to adjust image quality, volume, and the color mode. It also explains how to change the image source and adjust the projection position. - Epson PowerLite S3 | User Manual - Page 14
control or the [Enter] button on the projector's control panel to make the adjustment while computer you will need to adjust the Trackingg manually using the following procedure. PROCEDURE A can use and the operations they perform in the guide at the bottom of the screen. Remote control Control - Epson PowerLite S3 | User Manual - Page 15
panel The tracking value increases or decreases each time a button is pressed. C Press the you will need to adjust the Sync (synchronisation)g manually using the following procedure. PROCEDURE A Select "Signal" perform in the guide at the bottom of the screen. Remote control Control - Epson PowerLite S3 | User Manual - Page 16
. Remote control Control panel The sync value increases or decreases each time a button is pressed. C Press the [Menu] button to films in a dark room. Excels at emphasising dark gradations. Ideal for playing video games in a bright room. Ideal for images that conform to the sRGB color standard - Epson PowerLite S3 | User Manual - Page 17
press the button, the color modes change in the following order. The current setting appears in the top-right corner of the screen each time the color mode is changed. While the color mode name is displayed on the screen, it does not change to the next color mode setting - Epson PowerLite S3 | User Manual - Page 18
when zoom is set to the maximum "wide" position. • Even if you turn the power supply off, the "Image Shift" settings you make are kept. When either the projector position or the angle of the projector is changed, you can readjust or perform the following operations. Control panel Press and hold - Epson PowerLite S3 | User Manual - Page 19
Adjusting the Volume 19 The volume of the projector's built-in speaker can be adjusted as follows. PROCEDURE Remote control When the [ ] button is pressed, the volume increases. When the [ ] button is pressed, the - Epson PowerLite S3 | User Manual - Page 20
Changing the Projected Image (Source Search) 20 Automatically Detect Incoming Signals and Change the Projected Image (Source Search) The picture signal input from the connected equipment is automatically detected and projected. Computer S-Video Video Skip • When your video equipment is - Epson PowerLite S3 | User Manual - Page 21
Useful Functions This section explains useful functions for giving presentations and other projection, and also explains the security functions. - Epson PowerLite S3 | User Manual - Page 22
Functions for Enhancing Projection 22 Pausing the Image and Sound (A/V Mute) For example, this can be used if you want to pause the projection for a moment and focus the audience's attention on what you are saying. Or if you are making a computer presentation and you do not want to show details, - Epson PowerLite S3 | User Manual - Page 23
you press the button. You can also make this setting using the "Resize" command in the "Signal" menu. PROCEDURE A Display the pointer. Remote control Each time you press the button the pointer appears or disappears. - Epson PowerLite S3 | User Manual - Page 24
Functions for Enhancing Projection B Move the pointer icon. Remote control 24 Enlarging Part of the Image (E-Zoom) This is useful when you want to see images in greater detail, such as graphs and details in a table. Pointer icon You can use the "Pointer Shape" command in the "Settings" menu to - Epson PowerLite S3 | User Manual - Page 25
USB terminal on the back of this projector are connected by a commercially available USB A-B cable, you can use the projector's remote control like a wireless mouse area can be enlarged to between 1- 4 times, in 25 incremental steps. To USB port USB cable (commercially-available) To USB port - Epson PowerLite S3 | User Manual - Page 26
Functions for Enhancing Projection • The USB cable can only be connected to computers with a standard USB interface. If using a computer which is running Windows, the computer must have had a full version of Windows 98/2000/Me/XP Home Edition/XP Professional installed. If the computer is running a - Epson PowerLite S3 | User Manual - Page 27
Functions for Enhancing Projection 27 • If the mouse button settings are set to reverse on the computer, the operation of the remote control buttons will also be reversed. • The wireless mouse function cannot be used while the following functions are being used. · While a configuration menu is - Epson PowerLite S3 | User Manual - Page 28
function is not enabled. When Password Protect is Enabled When "Power ON Protect" is enabled (ON) When the power is turned on for the first time after the projector's power cable is connected to an electrical outlet, or when Direct Power On is carried out, the following password entry screen will - Epson PowerLite S3 | User Manual - Page 29
's menu is closed. If "Password Timer" is set to "OFF," the password entry screen will be displayed each time the power plug is disconnected and reinserted from the electrical outlet. If the projector power is on when it is in standby mode, the password entry screen will not be displayed. When "User - Epson PowerLite S3 | User Manual - Page 30
[Esc] button. (4) Select "Timer" and then press the [Enter] button. (5) While holding down the [Num] button, use the numeric keypad buttons to enter the setting time within the range of 1 to 9999 hours and then press the [Enter] button. If you make a mistake entering the - Epson PowerLite S3 | User Manual - Page 31
This function locks the buttons on the projector's control panel. This function is useful at times such as during show events so that only ." sp.34 Check the buttons you can use and the operations they perform in the guide at the bottom of the screen. Remote control Control panel 31 B Set to "ON - Epson PowerLite S3 | User Manual - Page 32
is displayed, select "Yes." The control panel buttons will be locked in accordance with the selected setting. There are two methods to cancel the projector's control panel lock. • Using remote control, change the "Settings" "Operation Lock" in the configuration menu to "OFF." • Hold down the - Epson PowerLite S3 | User Manual - Page 33
Configuration Menu This section explains how to use the configuration menu and its functions. - Epson PowerLite S3 | User Manual - Page 34
Using the Configuration Menu A Selecting from the top menu Top menu B Selecting from the sub menu C Changing the selected item guide Sub menu (Settings) 34 Buttons used Control panel Remote control Select the setting to change. - Epson PowerLite S3 | User Manual - Page 35
List of Functions 35 "Image" Menu The items that can be set will vary depending on the input source that is currently being projected. Setting details are saved separately for each source. Computer/RGB video Component videog/ Composite videog/ S-Videog Sub-menu Color Mode Brightness Contrastg - Epson PowerLite S3 | User Manual - Page 36
colours do not appear correctly when you select "Auto," select the appropriate signal for the connected equipment manually. (Only appears when composite video/S-Video signals are being projector.) Sets the video signal format. With the "Auto" function, image signals are recognized automatically. If - Epson PowerLite S3 | User Manual - Page 37
When set to "ON," the operation of all buttons on the projector's control panel except for the [Power] button will be disabled. sp.31 The shape of the pointer Electrical consumption: about an 18 W decrease, lamp life: about 1.5 times longer) Adjusts the volume. sp.19 Adjustment values for the " - Epson PowerLite S3 | User Manual - Page 38
projector's display. Message: Sets whether the input source name or color mode name or a message is displayed on the screen ("ON") or not displayed ("OFF") at times projector) is displayed when starting (ON)/ or not displayed when starting (OFF). The setting is enabled after turning the power supply - Epson PowerLite S3 | User Manual - Page 39
at an altitude of about 4900 ft (1500 m) or higher, set to "High." Sets whether the EMP Link 21L utility software is being used or not. To enable the EMP Link 21L, turn the projector's power off and wait until the cool down period has finished. Sets the language for message displays. Returns - Epson PowerLite S3 | User Manual - Page 40
signals being projected and the status of the projector. (Display only) Computer/RGB Video/Component time. If it reaches the lamp warning time, the characters are displayed in yellow. The cumulative operating time ask for service from your dealer or from Epson. sp.56 (Does not appear when the - Epson PowerLite S3 | User Manual - Page 41
. •The "Computer Input," "Zoom," "Image Shift," "User's Logo," "Lamp Hours," and "Language" settings will not be reset to their defaults. Clear the cumulative lamp operating time and reset to "0H." Perform this procedure when you replace the lamp. - Epson PowerLite S3 | User Manual - Page 42
Troubleshooting This chapter describes how to identify problems and what to do if a problem is found. - Epson PowerLite S3 | User Manual - Page 43
Using the Help If a problem occurs with the projector, the Help function uses on-screen displays to assist you in solving the problem. It uses a series of menus in a question and answer format. PROCEDURE A Display the Help menu. Remote control Control panel B Select a menu item. Remote control - Epson PowerLite S3 | User Manual - Page 44
Using the Help 44 D Repeat the operations in steps 2 and 3 to proceed through the menu to more detailed items. E Press the [Help] button to exit the help menu. If the Help function does not provide a solution to the problem, refer to "Problem Solving" sp.45 - Epson PowerLite S3 | User Manual - Page 45
error/ Sensor error Red : lit : flashing : off Remedy or Status Stop using the projector, disconnect the power cable from the electrical outlet, and contact your dealer or Epson. sp.56 Stop using the projector, disconnect the power cable from the electrical outlet, and contact your dealer or - Epson PowerLite S3 | User Manual - Page 46
. If the lamp still does not turn on, replace it with a new lamp. If this does not solve the problem, stop using the projector and disconnect the power cable from the electrical outlet. Then contact your dealer or Epson. sp.56 If the lamp is broken, replace it with a new lamp, or contact your local - Epson PowerLite S3 | User Manual - Page 47
period, the possibility that the lamp may break will increase. Replace the lamp with a new one as soon as possible. The Power indicator status will vary depending on the projector status at the time. • If the projector is not operating properly even though the indicators are all showing normal - Epson PowerLite S3 | User Manual - Page 48
, so that the colors projected by the projector and the colors appearing on the monitor may not necessarily match, but this is not a sign of a problem.) Images appear dark sp.53 Nothing appears on the external monitor sp.53 Problems when projection starts Power does not turn on sp.54 Other - Epson PowerLite S3 | User Manual - Page 49
Problems relating to images No images appear Check Was the [Power composite videog or S-Videog source is connected to the projector, use the "Video Signal" menu command to select is being input. The Power indicator is lit orange at this time. Press the [Power] button to turn the power on. If you do - Epson PowerLite S3 | User Manual - Page 50
change the image. sp.20 Is the power for the computer or video source turned on? Turn the power on for the devices. Are the image signals being output to the projector? Only when projecting images from a laptop computer or computer with a built-in LCD screen If the image signals are only being - Epson PowerLite S3 | User Manual - Page 51
fuzzy. Set the projector up in the room approximately one hour before it is to be used. If condensation forms on the lens, turn the power off and wait for that are output are compatible with this projector. Only when projecting computer images "List of Supported Monitor Displays" sp.73 (See your - Epson PowerLite S3 | User Manual - Page 52
Problem setup function, adjust the setting manually using the "Position" menu command driver documentation) Has the correct resolution been selected? Set the computer so that the signals that are output are compatible with this projector. Only when projecting computer images "List of Supported - Epson PowerLite S3 | User Manual - Page 53
Problem Remedy If a composite videog or S-Videog source is connected to the projector, use the "Video Signal" menu command to select the video signal sp.35 correctly? Is the lamp due for replacement? When the lamp is nearly due for replacement, the images will become darker and the color quality - Epson PowerLite S3 | User Manual - Page 54
a poor contact in the power cable, or the power cable may be defective. Reinsert the power cable is touched? power cable. If this does not solve the problem, stop using the projector, disconnect the power cable from the wall outlet and contact Epson. sp.56 Other problems No sound can be heard - Epson PowerLite S3 | User Manual - Page 55
Problem Solving 55 The remote control does not work Check Remedy Is sunlight or strong light from fluorescent lamps shining onto the remote control light-receiving area? Set the projector up in a location where strong light will not shine onto the remote control light-receiving area. Are - Epson PowerLite S3 | User Manual - Page 56
Time, Monday through Friday Toll or long distance charges may apply. Before you call, please have the following information ready: • Product name (Epson PowerLite S3) • Product serial number (located on the bottom of the projector) • Computer or video configuration • Description of the problem - Epson PowerLite S3 | User Manual - Page 57
Appendices This chapter provides information on maintenance procedures to ensure the best level of performance from the projector. - Epson PowerLite S3 | User Manual - Page 58
Installation 58 Setting Up the Projector The projector supports the following four different projection methods, allowing you to choose the best method for displaying your images. • Before setting up the projector, make sure you read the Important Safety Instructions first. sp.76 • Do not set this - Epson PowerLite S3 | User Manual - Page 59
Instructions sp.76 before cleaning. 59 Cleaning the Air Filters and Air Intake Vent If dust collects on the air filter or the air outlet, it can cause the internal temperature of the projector to rise, and this can lead to problems with operation and shortening of the optical engine's service - Epson PowerLite S3 | User Manual - Page 60
does not operate after it has been used for some time, it probably means that the batteries are becoming flat. Replace the batteries. Have two spare AAAsize alkaline batteries ready to use when required. Make sure you read the Safety Instructions sp.76 before handling the batteries. 60 B Insert the - Epson PowerLite S3 | User Manual - Page 61
. If replacing the lamp of a projector which has been installed on a ceiling, you should always assume that the lamp is broken and be extremely careful when removing the lamp cover. • Wait until the lamp has cooled down sufficiently before removing the lamp cover. To give the lamp enough time to - Epson PowerLite S3 | User Manual - Page 62
projector's power, and the confirmation buzzer beeps twice, disconnect the power cable. B Wait until the lamp has cooled down, then remove the lamp cover from the base of the projector and out of the projector. If the lamp is broken, replace it with a new lamp, or contact your local dealer for - Epson PowerLite S3 | User Manual - Page 63
it fits in place correctly. Once it is fully inserted, tighten the two screws. F Install the lamp cover. Slide the lamp cover onto the projector and tighten the cover screw. • Install the lamp securely. If the lamp cover is removed, the lamp turns off automatically as a safety precaution. Moreover - Epson PowerLite S3 | User Manual - Page 64
lamp operating time except after the lamp has been replaced, otherwise the lamp replacement period will guide at the bottom of the screen. Remote control Control panel PROCEDURE A Connect the power cable and turn on the projector. C When "Execute?" appears, select "Yes." The lamp operating time - Epson PowerLite S3 | User Manual - Page 65
reappears after they have been cleaned, they should be replaced. The air filter can be replaced even if the projector is installed on a ceiling. PROCEDURE A Turn off the projector's power. When the confirmation buzzer beeps twice, disconnect the power cable. B Remove the air filter. Put your finger - Epson PowerLite S3 | User Manual - Page 66
Configuration Menu." sp.34 Check which buttons on the remote control or the control panel you can use, and the operations they perform, in the guide at the bottom of the screen. • If the "User's Logo Protect" function of "Password Protect" is set to "ON," a message is displayed and the user - Epson PowerLite S3 | User Manual - Page 67
"Choose this image as the User's Logo?" appears, select "Yes." When you press the [Enter] button on either the remote control or the projector's control panel, the image will be displayed at its original resolution, so if a signal with a resolution that is different from the current resolution of - Epson PowerLite S3 | User Manual - Page 68
images and RGB video images from a computer being input to the "Computer/ Component Video" terminal by connecting an external monitor to this projector. Monitor port Cable provided with monitor To Monitor Out port (black) • Component video, S-Video, and component video images cannot be output to - Epson PowerLite S3 | User Manual - Page 69
Where to Buy." To purchase online, please visit the Epson Store at www.epsonstore.com (U.S. sales only). In Canada ELPKS35-S ELPKS43 ELPKS54 V12H162020 ELPSL01 Part Name Replacement lamp Air filter set (2) 50" softcase Samsonite soft shoulder case for projector and notebook ATA molded hardshell case - Epson PowerLite S3 | User Manual - Page 70
this guide which may be unfamiliar or which are not explained in the text of this guide itself. colour for an extremely short time. Because of this, the image must be scanned many times per second in order to High-Definition Television. A device consisting of a projector case with a hole in it that a - Epson PowerLite S3 | User Manual - Page 71
the connected source has a sRGB mode, set both the projector and the connected signal source to sRGB. A type of the signals are not synchronized, problems such as flickering, blurriness and personal computers to peripheral devices which only support relatively low data transmission speeds. A type - Epson PowerLite S3 | User Manual - Page 72
returns a ":" and waits for the next command to be sent. If command processing terminates with an error, the projector outputs an error message and then returns the ":" code. Power ON/OFF Signal selection A/V Mute ON/OFF A/V Mute Selection Item ON OFF Computer (Auto) Computer Component Video Video - Epson PowerLite S3 | User Manual - Page 73
output port. *2:Maximum Zoom The projection of some signals not listed in the table may still be possible. However, not all functions may be supported. Component Video/RGB Video Signal SDTVg(525i) (D1) SDTV (625i) SDTV (525p) (D2) HDTVg(750p) 16:9 (D4) HDTV (1125i) 16:9 (D3) Resolution (dots - Epson PowerLite S3 | User Manual - Page 74
light source) Max. audio output Speaker Power supply Operating temperature Storage temperature Weight Connectors PowerLite S3 327 (W) × 86 (H) × 246 used in this Projector. 0°- ±30° 0°- ±30° 0°- ±30° 0°- ±30° If you set the projector higher than 30º, it could damage the projector and cause an - Epson PowerLite S3 | User Manual - Page 75
Appearance 86 12 Center of lens 80 50.1* 12 83.7 7.7 327 104.7 *Distance from center of lens to suspension bracket fixing point 69.7 3-M4×9 127 75 246 115 Units: mm - Epson PowerLite S3 | User Manual - Page 76
children. • When you replace the lamp, never touch the new bulb with your bare hands. The invisible residue left by the oil on your hands may be shorten the bulb life. Use a cloth or gloves to handle the new bulb. Follow these safety instructions when setting up and using the projector: • Do not - Epson PowerLite S3 | User Manual - Page 77
projector or replacing power plug, otherwise you may receive an electric shock. • Clean the inside of the projector periodically. If the inside of the projector has not been cleaned for a long time, dust may build up and cause fire or electric shocks. Contact your dealer or Authorized Epson Service - Epson PowerLite S3 | User Manual - Page 78
purchase (except that the warranty period is 90 days for projector lamps). For warranty service, you must provide proof of the date of original purchase. What EPSON Will Do To Correct Problems: If you elect carry-in warranty service, please bring the product securely packaged in its original - Epson PowerLite S3 | User Manual - Page 79
warranty gives you specific legal rights, and you may also have other rights, which vary from jurisdiction to jurisdiction. To locate the Authorized EPSON Servicer nearest you, call the EPSON ConnectionSM at (800) 637-7661 + PIN or (562) 276-4394 in the U.S. and (905) 709-3839 in Canada or write to - Epson PowerLite S3 | User Manual - Page 80
the Lens 59 Cleaning the Projector Surface .... 59 Color Intensity 38 E EPSON accessories 56 PrivateLine Support 56 technical support 56 ESC/VP21 Lamp-Hours Reset 41, 64 Lamp indicator 46 Lamp replacement period 61 Language 39 Lens cover 8 Link21L 39 Power indicator 45 Power inlet 10 - Epson PowerLite S3 | User Manual - Page 81
Power ON Protect 28 Presentation 16 Presenters Online 56 PrivateLine Support 56 Problem Solving 45 Progressive 36 Projection 38 R Rear adjustable foot 10 Refresh Rate 40 Remote control 12, 60 Remote control light-emitting area.. 12 Remote control light-receiving area 8. , 10 Replacing - Epson PowerLite S3 | User Manual - Page 82
/or CPU Boards and Power Supplies used with Class B Personal Computers We Located at Tel EPSON AMERICA, INC. 3840 . Trade Name EPSON Type of Product Projector Model EMP-S3 FCC Compliance Statement installed and used in accordance with the instructions, may cause harmful interference to radio - Epson PowerLite S3 | User Manual - Page 83
Setup sheet) Outputs remote control signals. • [Power] button (See the Quick Setup sheet) Turns the projector power on and off. • [ ] buttons sp. ratiog changes each time this button is pressed. • [Help] button sp.43 Displays and closes the help, which shows solutions if a problem occurs. • [Volume
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
 |
 |
Epson PowerLite
S3
User’s Guide