Epson SP9900HDR Quick Reference Guide

Epson SP9900HDR - Stylus Pro 9900 Color Inkjet Printer Manual

Get Epson SP9900HDR - Stylus Pro 9900 Color Inkjet Printer PDF manuals and user guides
UPC - 010343872769
View all Epson SP9900HDR manuals
Add to My Manuals
Save this manual to your list of manuals

Epson SP9900HDR manual content summary:

  • Epson SP9900HDR | Quick Reference Guide - Page 1
    Epson Stylus® Pro 7900/9900 QUICK REFERENCE GUIDE
  • Epson SP9900HDR | Quick Reference Guide - Page 2
    Printer Parts Front Roll paper holder Front cover Ink bay Paper basket Back Interface connector for optional equipment USB interface Roll paper cover Control panel Ink bay Casters Network interface AC inlet Maintenance tank (Pro 9900 includes two tanks, one on each side of printer) 1
  • Epson SP9900HDR | Quick Reference Guide - Page 3
    Loading Roll Paper 1 Open the roll paper cover. 2 Push down the lock lever, then move the roll paper 6 Move the roll paper all the way to the right. 3 Place the roll paper on top of the printer. 7 Slide the roll paper holder to align the left adapter with the on the holder. 4 If necessary,
  • Epson SP9900HDR | Quick Reference Guide - Page 4
    ) button. 15 Press the Pause/reset button. 16 Check the printer's control panel and select the correct media type. Removing Roll Paper 1 Open the roll paper cover. 2 Press the Paper release (ePlaten) button. The paper rewinds automatically. 3 Push down the lock lever. Then move the roll paper
  • Epson SP9900HDR | Quick Reference Guide - Page 5
    again. • OFF-The printer will not perform automatic nozzle checks and cleaning cycles. Note: You can also run nozzle checks and head cleaning cycles from your computer using the Epson Printer Utility3 (Macintosh®) or the Utility tab in your printer driver (Windows). See your Printer Guide for more
  • Epson SP9900HDR | Quick Reference Guide - Page 6
    is finished, print the nozzle check again to confirm that the head is clean. Aligning the Print Head If your prints look grainy or blurry, or you see misregistration or "ghosting," you need to align the print head. 1 Make sure the printer is turned on. Load Epson Enhanced Matte paper. (You can
  • Epson SP9900HDR | Quick Reference Guide - Page 7
    printer is on. 1 Press the button to release the ink cover. If necessary, select the ink bay for the cartridge you want to replace, then press OK. 2 Open the ink cover all the way. Ink gauges for 11 cartridges listed below Maintenance tank gauges (one tank for Pro 7900) Replacing Ink Cartridges
  • Epson SP9900HDR | Quick Reference Guide - Page 8
    then reinserting it. 7 Close the ink cover. 6 Hold the cartridge with the arrow mark pointing toward the printer. Then insert the cartridge into the slot. Don't force it. Replacing Printer Parts Replacing the Paper Cutter If you notice that the paper isn't cut cleanly, you may need to replace the
  • Epson SP9900HDR | Quick Reference Guide - Page 9
    tanks is full. On the Pro 9900, the right tank is used more than the left. To maximize tank life, you can switch the tanks. 2 Turn off the printer. 8 Tighten the screw using a cross-head screwdriver. 3 Pull out the maintenance tank as shown. 9 Align the cutter cover, then press it in until
  • Epson SP9900HDR | Quick Reference Guide - Page 10
    position Moves the cutter to the replacement position NORMAL CLEANING, CLEAN EACH COLOR, POWER CLEANING MM/DD/YY HH:MM Current firmware version Percentage of ink remaining in each cartridge Percentage of capacity remaining in each maintance tank Ink in milliliters and paper in square centimeters for
  • Epson SP9900HDR | Quick Reference Guide - Page 11
    HEAD Photo, Proofing, Fine Art, Matte, Plain, Others STANDARD, NARROW, WIDE, WIDER PRINT -0.70% to 0.70% 0.0 sec. to 10.0 sec. STANDARD, -1, -2, -3, -4 STANDARD, HIGH, HIGHER ON, OFF Media type loaded in the printer. 8 mil (0.2 mm), 4 mil to 60 mil (0.1 to 1.5 mm) UNI-D, BI-D 2-COLOR Pro 9900 only) 10
  • Epson SP9900HDR | Quick Reference Guide - Page 12
    to epson.com/support to download drivers and firmware, access product documentation and troubleshooting, and get technical advice through e-mail. Support for non-Epson RIP Contact the RIP manufacturer. Web-based printer information management system myEpsonPrinter.com Epson and Epson Stylus are
  • Epson SP9900HDR | Quick Reference Guide - Page 13
    Lights and Buttons Paper light Power light and button Pause/reset light and button Ink light Black ink change button Paper feed up button Paper release (ePlaten™) light and button Menu button Paper cut button Ink cover open button OK button Paper feed down button Left arrow or paper source
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
Epson Stylus
®
Pro 7900/9900
QUICK REFERENCE GUIDE