Epson Stylus NX420 Start Here

Epson Stylus NX420 Manual

Get Epson Stylus NX420 PDF manuals and user guides View all Epson Stylus NX420 manuals
Add to My Manuals
Save this manual to your list of manuals

Epson Stylus NX420 manual content summary:

  • Epson Stylus NX420 | Start Here - Page 1
    Epson Stylus® NX420 Series Start Here Read these instructions before using your product. 1 Unpack Power cord French control panel stickers (included for Canada only) Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain
  • Epson Stylus NX420 | Start Here - Page 2
    ships with full cartridges and part of the ink from the first cartridges is used for priming the printer. Caution: Don't turn off the printer while it is priming or you'll waste ink. 5 Load paper 1 Open the paper support and pull up the extensions. 5 Slide the edge guide over. Continue with
  • Epson Stylus NX420 | Start Here - Page 3
    Cancel and disconnect the USB cable. You can't install your software that way. Any problems? If you experience problems during setup, see below: Network setup was unsuccessful. 2 Insert the NX420 Series software CD. Windows: If you see the AutoPlay window, click Run Setup.exe. If you see the
  • Epson Stylus NX420 | Start Here - Page 4
    ! NX420 Series Ink Cartridges Color Black Cyan Magenta Yellow Moderate-capacity (For lighter use) Standard-capacity 124 125 124 125 124 125 124 125 Epson and Epson Stylus are registered trademarks, Epson Exceed Your Vision is a registered logomark, and Supplies Central is a service mark
  • 1
  • 2
  • 3
  • 4
Start Here
Read these instructions before using your product.
1
Unpack
French control
panel stickers
(included for
Canada only)
Power cord
Caution:
Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials.
2
Turn on
1
Connect the power cable.
Caution:
Do not connect to your computer yet.
2
Press the
On
button.
3
Select language
1
To select
English
as your language, press
Start
.
Note:
If you want to change the language, press
or
to
select it, then press
Start
.
4
Install ink cartridges
Note:
Do not load paper yet.
1
Lift up the scanner, then open the cartridge cover.
2
Shake the ink cartridges gently 4 or 5 times, then unpack
them.
3
Remove only the yellow tape from each cartridge.
Caution:
Don’t remove any other seals or the cartridges may
leak.
*411841500*
*411841500*
Epson Stylus
®
NX420 Series