Epson Stylus NX510 Start Here
Epson Stylus NX510 - All-in-One Printer Manual
View all Epson Stylus NX510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson Stylus NX510 manual content summary:
- Epson Stylus NX510 | Start Here - Page 1
cord If anything is missing, contact Epson as described on the back. Note: The model name of your product may vary slightly from the one shown above. The included CD and documentation apply to all products in the series. Caution: Do not open ink cartridge packages until you are ready to install - Epson Stylus NX510 | Start Here - Page 2
your language, then press OK. 4 Install ink cartridges Note: Do not load paper yet. 1 Lift up the scanner, then open the cartridge cover. 2 Shake the ink cartridges gently 4 or 5 times, then unpack them. 3 Remove only the yellow tape from each cartridge. Caution: Don't remove any other seals - Epson Stylus NX510 | Start Here - Page 3
until it clicks. 6 Close the ink cartridge cover. Press it down until it clicks. 7 Lower the scanner. 8 Press the OK button to charge the ink. Charging takes about 3 minutes. Note: Your NX510 Series ships with full cartridges and part of the ink from the first cartridges is used for priming the - Epson Stylus NX510 | Start Here - Page 4
and behind the tab, with the printable side face up. Note: Don't load the paper sideways; always load it short edge first. 5 Slide the edge guide over. Continue with section 6 to choose your connection type and install software. - Epson Stylus NX510 | Start Here - Page 5
way. 2 Insert the NX510 Series software CD. With Windows Vista®, if you see the AutoPlay window, click Run Setup.exe. When you see the User Account Control screen, click Continue. 3 Click Install and follow the on-screen instructions. 4 When you see this screen, select Install driver for direct USB - Epson Stylus NX510 | Start Here - Page 6
Quick Guide or on-screen Epson Information Center. Macintosh® 1 Make sure the NX510 Series is NOT CONNECTED to your computer. 2 Insert the NX510 Series software CD. 3 Double-click the Epson icon. 4 Click Install and follow the on-screen instructions. 5 When you see this screen, select Install driver - Epson Stylus NX510 | Start Here - Page 7
troubleshooting advice, and software downloads. You can also purchase paper and ink. Network Installation Guide and Video Instructions on configuring the NX510 Series for a network. For a video tutorial and other information about setting up a wireless network, go to: epson.com/support/wireless - Epson Stylus NX510 | Start Here - Page 8
service mark of Seiko Epson Corporation. DURABrite is a registered trademark and Epson Stylus is a registered trademark of Epson America with you when purchasing replacement ink cartridges. Printed in XXXXXX Epson Stylus® NX510 Series Ink Cartridges Color Black Standardcapacity 69 Highcapacity
*411638300*
*411638300*
If anything is missing, contact Epson as described on the back.
Note:
The model name of your product may vary slightly from the one shown above.
The included CD and documentation apply to all products in the series.
Caution:
Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
Canada only:
For French speakers, remove sticker(s) from the backing sheet and
place over corresponding text on the control panel.
Remove all protective materials.
Unpack
1
Start Here
(Included for
Canada only)
1
Connect the power cable.
±
Caution:
Do not connect to your computer yet.
2
Raise the display screen, then press the
On
button.
Turn on and adjust
2
Power cord
Series