Epson Stylus Pro 7000 Product Support Bulletin(s)
Epson Stylus Pro 7000 - Print Engine Manual
 |
View all Epson Stylus Pro 7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson Stylus Pro 7000 manual content summary:
- Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 1
Total Pages: EPSON Stylus Pro 9000, 9500, 9600, 7000, 7500, 7600, 10000, 10600, 5000, 5500 and Stylus Color 3000 Printers PostScript Printing Support for Mac OS X Native Mode This bulletin provides instructions for installing and configuring a Mac OS X Client with your existing EPSON hardware or - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 2
Other to continue. 4. Navigate to the location of your PPD file. After selecting the PPD file it should reflect the name of the printer under the Printer Model section. Click on the Add button. 5. Repeat the process to add your additional queues. Your Mac OS X Client should now be ready to print. 2 - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 3
under Applications - Utilities 2. Click on the Add button and select IP Printing from the sub-menu. 3. Enter the IP Address of the Postscript Server under Printer's Address. Uncheck the Use default queue on server and type in the queue you wish to add. Click on the - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 4
the process to add your additional queues. Your Mac OS X Client should now be ready to print. Note: The StylusRIP does not have a separate folder on the CD to select the printer's PPD. In order to select the PPD it must be copied from another client's Printer Description folder as shown below (HDD - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 5
(s) being used. Maximum custom page size allowable per operating system (for Epson standard driver): Stylus Stylus Stylus Stylus Stylus Stylus Stylus Stylus Stylus Stylus Pro Color 3000 Pro 5000 Pro 5500 Pro 7000 Pro 7500 Pro 7600 Pro 9000 Pro 9500 Pro 9600 10000 Series Macintosh OS Win 9x - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 6
options (PPD): EPSON Stylus RIP EPSON Fiery RIP Station EPSON Fiery Spark Designer (Mac) EPSON Fiery Spark Professional Stylus Color 3000 44 in. N/A N/A N/A Stylus Pro 5000 44 in. 44 in. N/A N/A Stylus Pro 5500 N/A N/A 44 in. Stylus Pro 7000 N/A See NOTE 1 N/A 44 in. N/A Stylus Pro 7500 - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 7
from Photoshop, the maximum page length you will be able to output to any Epson large format printer using the standard Epson print driver would be 83.33 inches (30,000 pixels / 360dpi). As for the Epson desktop products, they rasterize data at 720dpi, therefore the maximum page length obtainable - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 8
. page setup). 1. Launch Illustrator and open or place your file in the page layout. 2. Click on File, then Document Setup. The following screen appears. 3. Uncheck Use Print Setup, enable Tile Full Pages and create the page size (in our example we - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 9
5. Click on the Paper Tab. The following appears. 6. Set the Paper Source to Roll Paper (Banner) and also enable Save Roll Paper. 5 - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 10
7. When creating the custom page size, divide the banner size by a value that will make it less than the printer maximum custom page size (not necessary for OS/Drivers that support 590.5 inches). In this example we take (227/3 = 75.7), therefore the custom page size created would be 44x75.7 inches. - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 11
8. After setting the custom page size and other driver settings (media type, resolution, etc.), click OK. This will bring you back to the document setup. The page should now show the following. 9. At this point you can and resize the image to fit within the printable area and print. 7 - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 12
CorelDRAW 9: In this example, a banner is created at 227 inches. 1. Launch CorelDRAW and open or place an image in your page layout. 2. Adjust the page size and image for the document as shown in the following image. 3. Click on File and Print Setup. 8 - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 13
4. Click on the Paper Tab. The following appears. 5. Set the Paper Source to Roll Paper (Banner) and also enable Save Roll Paper. 9 - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 14
by a value that will make it less than the printer maximum custom page size (not necessary for OS/Drivers that support 590.5 inches, unless the document is beyond that size). page size and other driver settings (media type, resolution, etc.), click OK. This will bring you back to the document. 10 - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 15
8. At this point, click File then Print. CorelDRAW will then run a pre-flight check and will show the following window. 11 - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 16
Print Tiled Pages and set any additional parameters as you see fit. 10. At this point you could check other tab settings (if necessary) how the file will be printed or Print to output the file to your printer. For all other applications, please refer to your software documentation for information on - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 17
SUPPORT BULLETIN Date: 11/21/2001 PSB No.: PSB.2001.11.002 Reference: N/A Originator: RD/RR Authorization: Affected Product(s): Epson Stylus Pro 5000/5500/7000/7500/9000/9500/10000/10000CF Subject: Windows XP Driver & Status Monitor 3 Installation Procedure This bulletin describes Windows XP printer - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 18
As instructed at following EPSON Printer Utility Setup screen Power ON your printer. Your printer will be detected automatically. Select Install the software automatically (Recommended) option then click NEXT to continue at the Found New Hardware Wizard screen. 3. Your will be prompted with Windows - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 19
click OK. Next, you will see the progress bar followed by the Windows Logo verification screen. Click on Continue Anyway option to continue. 2. As instructed at the following EPSON Printer Utility Setup screen Power ON your printer. The IEEE 1394 card will be detected automatically. At the Found New - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 20
Windows Logo verification screen. Click on Continue Anyway option to continue. 7. After the driver files have been copied to you local hard disk drive, click on Finish to compete the driver installation. 8. To install Epson Status Monitor 3 follow the instructions under section heading Installation - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 21
Instructions for Ethernet Connection 1. At the EPSON Printer Utility Setup screen highlight your printer then click OK. Next, you will see the progress bar followed by the Windows Logo verification screen. Click on Continue Anyway option to continue. 2. At this point DO NOT POWER On your printer and - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 22
's IP address. Click on the Start button, then Control Panel followed by Printers and Other Hardware then go to Printers and Faxes. Right click on the printer icon and choose Properties from the pop-up menu. 5. At the printer properties screen, click on Ports and then on the Add Port... button. On - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 23
address. Check with your System Administrator for the correct IP address assigned to the Epson Type B Ethernet card on your network. 7. If Windows identifies the Epson card automatically, click Finish at the Completing the Add Standard TCP/IP Printer Port Wizard. If your card is not identifies as an - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 24
the next screen click on Apply and then on Close to finish the installation. Your printer driver installation has been completed and the printer is ready to print. 9. To install Epson Status Monitor 3 follow the instructions under section heading Installation Procedure for Epson Status Monitor 3. 8 - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 25
Installation procedure for Epson Status Monitor 3 1. At the EPSON Status Monitor 3 setup screen highlight your printer then click OK. Next, you will see the progress bar followed by a window indicating that EPSON Status Monitor 3 is complete. 9 - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 26
show up when the appropriate printer driver is selected. 2. PC Connection: When connecting a Stylus Pro 7000 Series, 9000 Series or 10000 Series to a Windows PC via USB, Ethernet or FireWire and while attempting to print, an error message ("Printer Off-Line" or "Communication Error" on PC side) or - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 27
the system: Sorry, a system error occurred. Illegal instruction To temporarily turn off extensions, restart and hold down the shift key Effected Products: Ink-Jet Printers: Model Name Stylus Pro 9000 Stylus Pro 7000 Stylus Color 900 Epson Stylus Driver Updater *1 Scanner: Model Name Expression - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 28
the FireWire files from the system: 1. Insert the Mac OS bootable CD in your CD ROM drive 2. Reboot the system while holding down the C key on the Keyboard 3. After the system is rebooted trash the FireWire Enabler and the FireWire Support files from the Extensions Folder 4. Restart the system - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 29
. A) The following Epson models are supported in OS X Classic mode when using the connector type(s) described in the chart below. Model Stylus Color 3000 Stylus Pro 5000 Stylus Pro 5500 Stylus Pro 7000 Stylus Pro 7500 Stylus Pro 9000 Stylus Pro 9500 Stylus Pro 10000/10000CF Driver Version 5.69E - Epson Stylus Pro 7000 | Product Support Bulletin(s) - Page 30
the Web Windows Me Update on the Web EPSON Stylus PRO 5000 Update on the Web Update on the Web EPSON Stylus PRO 5500 EPSON Stylus PRO 7000 EPSON Stylus PRO 7500 EPSON Stylus PRO 9000 EPSON Stylus PRO 9500 EPSON Stylus PRO 10000 EPSON Stylus PRO 10000CF Driver that came with printer Update on
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
 |
 |
1
EPSON
Product Support Bulletin
Date:
09/25/2002
Originator:
MS
PSB #:
PSB.2002.09.004
Authorization:
Reference:
N/A
Total Pages:
Product(s):
EPSON Stylus Pro 9000, 9500, 9600, 7000, 7500, 7600, 10000, 10600, 5000,
5500 and Stylus Color 3000 P
rinters
Subject:
PostScript Printing Support for Mac OS X Native Mode
This bulletin provides instructions for installing and configuring a Mac OS X Client with your
existing EPSON hardware or software RIP. If your EPSON Professional Wide Format printer was
bundled with one of the RIP packages listed below, or if you had purchased the RIP as an option,
then you can configure a Mac OS X Client with OS Version 10.2 and above for PostScript printing
by simply installing the appropriate RIP PPD.
•
EFI RS 5000 LX Series
– Stylus Pro 5000 printer
•
EFI RS 5100 X2 Series
- Stylus Pro 9000, 7000, 9500 and 7500 printers
•
Fiery Spark Designer – Stylus Pro 5500 printer
•
Fiery Spark Professional 1.0 – Stylus Pro 5500 and Stylus Pro 10000ARC/DYE printers
•
Fiery Spark Professional 2.0 – Stylus Pro 9600UCM/7600UCM printers
•
EPSON StylusRIP -
Stylus Color 3000 and Stylus Pro 5000 printers
Installation Instructions:
Setup your existing RIP Server as per the instructions provided in the User’s Guide that came
with your RIP. To setup a Mac OS X Version 10.2 Client follow the instructions below. There are
two ways you can add a PPD and configure your printer in OS X,
AppleTalk
or
IP Printing
.
AppleTalk Installation:
1.
Open the
Print Center
, which can be found on your hard disk driver under
Applications - Utilities