Epson Stylus Pro 7880 ColorBurst Edition Product Information Guide
Epson Stylus Pro 7880 ColorBurst Edition - Stylus Pro 7880 ColorBurst Manual
 |
View all Epson Stylus Pro 7880 ColorBurst Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson Stylus Pro 7880 ColorBurst Edition manual content summary:
- Epson Stylus Pro 7880 ColorBurst Edition | Product Information Guide - Page 1
mode Check the label on the back of your printer for voltage information. Dimensions and Weight Dimensions Epson Stylus Pro 7880: Width: 47.12 inches (1178 mm) Depth: 20.04 inches (501 mm) Height: 22.4 inches (560 mm) (without stand) Epson Stylus Pro 9880: Width: 68.08 inches (1702 mm) Depth: 27 - Epson Stylus Pro 7880 ColorBurst Edition | Product Information Guide - Page 2
RH Print quality guarantee: 40 to 60% RH Storage: 20 to 85% RH (stored in container) Media Roll paper Maximum roll width Epson Stylus Pro 7880: 24 inches (610 mm) Epson Stylus Pro 9880: 44 inches (1118 mm) Maximum roll length Up to 150 feet for 2-inch cored media Up to 673 feet for 3-inch cored - Epson Stylus Pro 7880 ColorBurst Edition | Product Information Guide - Page 3
the "replace cartridge" indicator comes on. The printer ships with full cartridges and part of the ink from this first set of cartridges is used for priming the printer. For best printing results, use up a cartridge within six months of opening the package. 3 - Epson Stylus Pro 7880/9880 10/07 - Epson Stylus Pro 7880 ColorBurst Edition | Product Information Guide - Page 4
Manual Media Cutting System Epson Stylus Pro 7880 Epson Stylus Pro 9880 C12C815231 C815182 Replacement Manual Cutting Blade (for Manual Media C815192 Cutting System) One-year extended warranty* EPP7898B1 Two-year extended warranty* EPP7898B2 *Must be purchased within 12 months of printer - Epson Stylus Pro 7880 ColorBurst Edition | Product Information Guide - Page 5
printer parts and settings NETWORK STATUS Prints a sheet showing the network settings; SHEET see the on-screen Network Guide . SERVICE LIFE Displays the service life of each printer part. EDM STATUS For future enhancements to the printer; no seconds). 5 - Epson Stylus Pro 7880/9880 10/07 - Epson Stylus Pro 7880 ColorBurst Edition | Product Information Guide - Page 6
screen Network Guide for details) manually. IP, SM, DG SETTING Enter the IP address settings, if selecting the address manually printer until you are ready to replace it. To prevent ink reporting errors, never replace the ink cartridges with the printer turned off. 10/07 Epson Stylus Pro 7880/9880 - Epson Stylus Pro 7880 ColorBurst Edition | Product Information Guide - Page 7
Epson Stylus Pro 7880/9880 6. Gently shake the cartridge well before installing it. 3. Raise the ink levers to the unlocked position. 7. Hold the cartridge with the arrow pointing toward the printer. Then insert the cartridge into the slot. Don't force it in. Note: If you can't insert the - Epson Stylus Pro 7880 ColorBurst Edition | Product Information Guide - Page 8
Epson Stylus Pro 7880/9880 Once the cartridge is installed, the printer returns to its READY state. Paper Type and Banding Banding can be caused by several problems, such as clogged print head nozzles or a misaligned print head. It can also be caused by using a paper that is not defined in the - Epson Stylus Pro 7880 ColorBurst Edition | Product Information Guide - Page 9
the status of your cutter by printing a status sheet. See page 6 for instructions. You can obtain a new cutter blade from Epson (part number C12C815291). 7. Release the side pin. The cutter pops out. Warning: The blade is sharp. Be careful when removing it. 9 - Epson Stylus Pro 7880/9880 10/07 - Epson Stylus Pro 7880 ColorBurst Edition | Product Information Guide - Page 10
from the system during the initial ink charge and manual and automatic print head cleaning. When the tank is Epson Stylus Pro 7880 has one maintenance tank (on the right side), and the 9880 has two (one on either side). Replacement tanks are available from Epson (part number C12C890191). The printer - Epson Stylus Pro 7880 ColorBurst Edition | Product Information Guide - Page 11
driver for your new printer, please visit epson.com/support. Choose your printer and click Drivers Epson Stylus Pro 7880/9880 Printer Guide Epson Stylus Pro 7880/9880 Quick Reference Guide Epson Stylus Pro 7880/9880 CD-ROM with on-screen User's Guide and Network Guide 11 - Epson Stylus Pro 7880/9880
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
 |
 |
Epson Stylus Pro 7880/9880
1 - Epson Stylus Pro 7880/9880
10/07
Printer Parts
These illustrations show the Epson Stylus Pro 9880 but the
parts are the same for the Pro 7880 unless otherwise noted.
Printer Specifications
Electrical
Check the label on the back of your printer for voltage
information.
Dimensions and Weight
Roll paper
mounting bracket
Network
interface
AC
inlet
Control panel
Paper lever
Left ink
cartridge
compartment
Roll paper
cover
Maintenance
tank
USB
interface
Back
Roll paper
on spindle
Right ink
cartridge
compartment
Casters
Paper
basket
Front
cover
Front
Paper straps
(Pro 9880 only)
Printer
stand
Maintenance
tank (Pro
9880 only)
Input voltage range
90 to 264 V
Rated frequency range
50 to 60 Hz
Input frequency range
49 to 61 Hz
Rated current
1.0 A at 120 V
0.5 A at 220 V
Power consumption
(approx.)
Epson Stylus Pro 7880:
Approx. 50 W
6 W or less in sleep mode
1 W or less in power off mode
Epson Stylus Pro 9880:
Approx. 58 W
6 W or less in standby mode
1 W or less in power off mode
Dimensions
Epson Stylus Pro 7880:
Width: 47.12 inches (1178 mm)
Depth: 20.04 inches (501 mm)
Height: 22.4 inches (560 mm)
(without stand)
Epson Stylus Pro 9880:
Width: 68.08 inches (1702 mm)
Depth: 27.12 inches (678 mm)
Height: 47.84 inches (1196 mm)
Weight
(without consumables)
Epson Stylus Pro 7880:
108 lb (49 kg)
Epson Stylus Pro 9880:
198 lb (90 kg)
Stand: 23.1 lb (10.5 kg)