Epson V11H164020 Start Here Card
Epson V11H164020 - PowerLite Home 10+ WVGA LCD Projector Manual
 |
UPC - 010343851061
View all Epson V11H164020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson V11H164020 manual content summary:
- Epson V11H164020 | Start Here Card - Page 1
EPSON PowerLite® Home 10 Quick Setup 1 Unpack the projector Your projector comes with the following items: Projector User's Guide Remote control Rubber feet Power cord 2 Set up the remote control Pull out the insulating tape to remove it from the battery holder. The remote - Epson V11H164020 | Start Here Card - Page 2
you may need a distribution amplifier. Before you connect your equipment, make sure everything is turned off. Connect your video equipment to the projector using any of the available connections shown below. TV VCR DVD player Camcorder Cable/satellite box S-video cable TV VCR Camcorder Video game - Epson V11H164020 | Start Here Card - Page 3
in front of your screen or wall, or on a high shelf behind you. See the User's Guide for other ways of setting up the projector. Table Convenient for temporary front projection. Ideally, place the projector directly in front of the screen, facing the screen squarely. The base of the lens should be - Epson V11H164020 | Start Here Card - Page 4
yet. Wait until you've turned on the projector.) 4 Press the Power button on the projector or remote control. You hear a beep, the power light flashes green, and the projector lamp comes on in about 45 seconds. Power button The projector automatically detects your video source and begins projecting - Epson V11H164020 | Start Here Card - Page 5
) 637-7661 and enter the PIN on the included EPSON PrivateLine Support card. This service is available 6 AM to 6 PM Pacific Time, Monday through Friday, for the duration of your warranty period. You may also speak with a projector support specialist by dialing one of these numbers: U.S.: (562) 276 - Epson V11H164020 | Start Here Card - Page 6
the answer to your problem here, see the User's Guide for more troubleshooting tips. The image doesn't fill the screen. Try adjusting the zoom ring. If possible, place the projector farther away from the screen. Press the Aspect button to move through the projector's aspect ratio settings: Normal
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
1
Unpack the projector
Your projector comes with the following items:
Quick Setup
Projector
User’s Guide
Power cord
Rubber feet
EPSON PowerLite
®
Home 10
2
Set up the remote control
Pull out the insulating tape to remove it
from the battery holder.
The remote control is ready for use.
Remote control