Epson V300 Product Support Bulletin(s)

Epson V300 - Perfection Photo Manual

Get Epson V300 - Perfection Photo PDF manuals and user guides
UPC - 010343868786
View all Epson V300 manuals
Add to My Manuals
Save this manual to your list of manuals

Epson V300 manual content summary:

  • Epson V300 | Product Support Bulletin(s) - Page 1
    to inform you about the features and limitations of Vertical Banding Improvement, implemented in Epson Scan for the Perfection V300 Photo. Description: Vertical Banding Improvement (VBI) is a driver setting you can use for correcting vertical banding issues that can occur when scanning certain
  • Epson V300 | Product Support Bulletin(s) - Page 2
    .3 megapixels (83,333,333 pixels). Therefore, make sure to note the image pixel size when scanning at higher resolutions (i.e. 1200dpi). Although VBI can support a 1200dpi scanning resolution, this feature will not work if the pixel size exceeds 83.3 megapixels. If the pixel size is too big, reduce
  • 1
  • 2
Page 1 of 2
PSB.2008.10.001
EPSON
P
RODUCT
S
UPPORT
B
ULLETIN
Date:
09/15/2008
Originator:
TC
PSB #:
PSB.2008.10.001
Authorization:
Reference:
TE08-0407 Rev. A
Total Pages:
2
Product(s):
Perfection V300 Photo
Subject:
Limitations of Vertical Banding Improvement feature in Epson Scan
This bulletin was created to inform you about the features and limitations of Vertical Banding
Improvement, implemented in Epson Scan for the Perfection V300 Photo.
Description
:
Vertical Banding Improvement (VBI) is a driver setting you can use for correcting vertical
banding issues that can occur when scanning certain metallic coated materials or documents.
Vertical Banding Improvement can only be used on reflective media—film is not supported.
When using the Vertical Banding Improvement, the maximum allowed resolution is 1200dpi.
The VBI setting is located in the “Configuration” menu under the “Other” settings tab in the
Epson Scan User Interface as shown below.
By default, Vertical Banding Improvement is disabled. Once the box is checked, the VBI setting
will remain enabled even after the Epson Scan driver has been closed. To turn off this setting,
you must uncheck the box.