Epson WorkForce 1100 Start Here
Epson WorkForce 1100 - Wide-format Printer Manual
 |
View all Epson WorkForce 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson WorkForce 1100 manual content summary:
- Epson WorkForce 1100 | Start Here - Page 1
Series Start Here Please read these instructions before using the printer. 1 Unpack If anything is missing, contact Epson® as described on the back of this sheet. Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. - Epson WorkForce 1100 | Start Here - Page 2
cartridges. 1 Lift up the printer cover. 2 Open the cartridge cover. 3 Shake the ink cartridges gently 4 or 5 times, then unpack them. 4 Remove only the yellow tape from each cartridge. Caution: Don't remove any other seals from the cartridges. 5 Insert the cartridges in the holder for each color - Epson WorkForce 1100 | Start Here - Page 3
2.5 minutes. Note: Your WorkForce 1100 Series ships with full cartridges and part of the ink from the first cartridges is used for priming the printer. Caution: Don't turn off the printer while the power light is flashing or you'll waste ink. 4 Load paper 1 Open the paper support and pull up the - Epson WorkForce 1100 | Start Here - Page 4
the output tray and pull out the extensions. 3 Squeeze the edge guide and slide it left. 4 Load paper against the right edge guide and behind the tab, with the printable side face up. Note: Don't load the paper sideways; always load it short edge first. 5 Squeeze the edge guide and slide it over. - Epson WorkForce 1100 | Start Here - Page 5
can't install your software that way. 2 Insert the WorkForce 1100 Series software CD. If you see the AutoPlay window, click Run Setup.exe. When you see the User Account Control screen, click Continue or Yes. 3 Click Install and follow the on-screen instructions. 4 When you see this screen, click the - Epson WorkForce 1100 | Start Here - Page 6
CONNECTED to your computer. 2 Insert the WorkForce 1100 Series software CD. 3 Double-click the Epson icon. 4 Click Install and follow the on-screen instructions. 5 When prompted, connect a USB cable. Use any open USB port on your computer. Make sure the printer is securely connected and turned on - Epson WorkForce 1100 | Start Here - Page 7
WorkForce 1100 Series user's guide, FAQs, online troubleshooting advice, and software downloads. You can also purchase paper and ink. Online help with your software Select Help or ? when you're using your software. Technical Support Internet Support Visit Epson's support website at epson.com/support - Epson WorkForce 1100 | Start Here - Page 8
your number! Color Black Cyan Magenta Yellow Standard-capacity 69 69 69 69 High-capacity 68 68 68 68 Note: The Workforce 1100 Series requires two black ink cartridges. Epson is a registered trademark, Epson Exceed Your Vision is a registered logomark, and Supplies Central is a service mark of
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
Unpack
If anything is missing, contact Epson
®
as described on the back of this sheet.
Caution:
Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
Remove all protective materials.
1
Start Here
Please read these instructions before using the printer.
Turn on the printer
1
Connect the power cable.
Caution:
Do not connect to your computer yet.
2
Press the
power button.
2
*411693900*
*411693900*
Series