Epson WorkForce 320 Start Here
Epson WorkForce 320 Manual
 |
View all Epson WorkForce 320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson WorkForce 320 manual content summary:
- Epson WorkForce 320 | Start Here - Page 1
WorkForce® 320 Series Start Here Read these instructions before using your product. 1 Unpack Phone cord Power cord French control panel stickers (included for Canada only) Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain - Epson WorkForce 320 | Start Here - Page 2
cartridges is used for priming the printer. C aution: Don't turn off the printer while it is priming or you'll waste ink. 5 Load paper 1 Open the paper support and pull up the extensions. 6 Connect the phone cord To fax, connect the included phone cord to a telephone wall jack and to the LINE - Epson WorkForce 320 | Start Here - Page 3
Group Dial Redial/Pause Select Copy Navigate Start copy Enter fax One-touch or Fax mode menus or fax (B&W numbers for dial buttons or Color) dialing Any problems? You see error messages on the printer's LCD screen. See your Quick Guide for troubleshooting information. Setup is unable to find my - Epson WorkForce 320 | Start Here - Page 4
! WorkForce 320 Series Ink Cartridges Color Moderate-capacity (For lighter use) Standard-capacity Black 124 125 Cyan 124 125 Magenta 124 125 Yellow 124 125 Epson is a registered trademark, Epson Exceed Your Vision is a registered logomark, and Supplies Central is a service mark
-
1 -
2 -
3 -
4
 |
 |
Start Here
Read these instructions before using your product.
1
Unpack
French control
panel stickers
(included for
Canada only)
Power cord
Phone cord
Caution:
Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials.
2
Turn on
1
Connect the power cable.
Caution:
Do not connect to your computer yet.
2
Press the
On
button.
3
Select settings
1
To select
English
as your language, press
OK
.
(If you want to change the language, press
or
to
select it, then press
OK
.)
2
Select your
Country/Region
and press
OK
.
3
Select the current
Daylight Saving Time
setting (
Winter
or
Summer
) and press
OK
.
4
Select the
Date
format and press
OK
.
5
Press the number keys to enter the
Date
and press
OK
.
6
Select the
Time
format (
12h
or
24h
) and press
OK
.
7
Press the number keys to enter the
Time
. Then press
or
to select
AM
or
PM
, if necessary.
8
Press
OK
.
4
Install ink cartridges
Note:
Do not load paper yet.
1
Lift up the scanner.
2
Open the cartridge cover.
3
Shake the ink cartridges gently 4 or 5 times, then unpack
them.
*411867400*
*411867400*
WorkForce
®
320 Series