Epson WorkForce 323 Start Here
Epson WorkForce 323 Manual
 |
View all Epson WorkForce 323 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson WorkForce 323 manual content summary:
- Epson WorkForce 323 | Start Here - Page 1
WorkForce® 323/325 Series Start Here Read these instructions before using your product. 1 Unpack Phone cord Power cord French control panel stickers (included for Canada only) Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to - Epson WorkForce 323 | Start Here - Page 2
from the first cartridges is used for priming the printer. C aution: Don't turn off the printer while it is priming or you'll waste ink. 5 Load paper 1 Open the paper support and pull up the extensions. 2 Pull out the output tray extensions and raise the stopper. 6 Connect the phone cord To fax - Epson WorkForce 323 | Start Here - Page 3
You must install the software on every computer from which you want to print. For the first installation, we recommend using a USB cable (not included) to simplify wireless setup. After the printer is connected to the network, you will be prompted to remove the USB cable. If you're using Mac OS - Epson WorkForce 323 | Start Here - Page 4
! WorkForce 323/325 Series Ink Cartridges Color Moderate-capacity (For lighter use) Standard-capacity Black 124 125 Cyan 124 125 Magenta 124 125 Yellow 124 125 Epson is a registered trademark, Epson Exceed Your Vision is a registered logomark, and Supplies Central is a service mark
-
1 -
2 -
3 -
4
 |
 |
Start Here
Read these instructions before using your product.
1
Unpack
French control
panel stickers
(included for
Canada only)
Power cord
Phone cord
Caution:
Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials.
2
Turn on
1
Connect the power cable.
Caution:
Do not connect to your computer yet.
2
Press the
On
button.
3
Select settings
1
To select
English
as your language, press
OK
.
(If you want to change the language, press
or
to
select it, then press
OK
.)
2
Select your
Country/Region
and press
OK
.
3
Select the current
Daylight Saving Time
setting (
Winter
or
Summer
) and press
OK
.
4
Select the
Date
format and press
OK
.
5
Press the number keys to enter the
Date
and press
OK
.
6
Select the
Time
format (
12h
or
24h
) and press
OK
.
7
Press the number keys to enter the
Time
. Then press
or
to select
AM
or
PM
, if necessary.
8
Press
OK
.
4
Install ink cartridges
Note:
Do not load paper yet.
1
Lift up the scanner.
2
Open the cartridge cover.
3
Shake the ink cartridges gently 4 or 5 times, then unpack
them.
*411868300*
*411868300*
WorkForce
®
323/325 Series