Epson WorkForce 60 Start Here
Epson WorkForce 60 - Ink Jet Printer Manual
 |
View all Epson WorkForce 60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson WorkForce 60 manual content summary:
- Epson WorkForce 60 | Start Here - Page 1
Start Here Read these instructions before using your product. 1 Unpack 3 Install ink cartridges 1 Lift up the printer cover. USB cable Power cord Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Remove all - Epson WorkForce 60 | Start Here - Page 2
paper is under the tabs on the edge guides. 4 6-inch Letter-size 5 Choose your connection You can connect your printer to your existing network (wireless or wired) or directly to your computer using a USB cable. See below for details on each connection method. Wireless Connection You must install - Epson WorkForce 60 | Start Here - Page 3
-click the Epson icon. 3 Windows: Click Install and follow the on-screen instructions. Macintosh: Select the items you want to install. Then click Install. Epson Technical Support Visit epson.com/support (U.S.) or epson.ca/support (Canada) where you can download drivers, view manuals, get FAQs - Epson WorkForce 60 | Start Here - Page 4
authorized reseller. To find the nearest one, call 800-GO-EPSON (800-463-7766). Printing Problems • Make sure the size of paper you loaded matches the paper size selected in your printer software. • Printing stops when an ink cartridge is expended. If a color cartridge is expended, you may be able
-
1 -
2 -
3 -
4
 |
 |
Start Here
Read these instructions before using your product.
1
Unpack
Power cord
USB cable
Caution:
Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials.
2
Turn on
1
Connect the power cable.
Caution:
Do not connect to your computer yet.
2
Press the
Power
button.
3
Install ink cartridges
1
Lift up the printer cover.
2
Open the cartridge cover.
3
Shake the ink cartridges gently 4 or 5 times, then unpack
them.
4
Remove only the yellow tape from each cartridge.
Caution:
Don’t remove any other seals or the cartridges may
leak.
5
Insert the cartridges in the holder for each color. Press
each cartridge down until it clicks.
6
Close the cartridge cover. Press down until it clicks.
7
Lower the printer cover.
8
Press the
Ink
button to prime the ink delivery system.
This takes several minutes.
Note:
Your printer ships with full cartridges and part of the ink
from the first cartridges is used for priming the printer.
Caution:
Don’t turn off the printer while it is priming or you’ll
waste ink.
*411961800*
*411961800*