Epson WorkForce 615 Start Here
Epson WorkForce 615 - All-in-One Printer Manual
 |
View all Epson WorkForce 615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson WorkForce 615 manual content summary:
- Epson WorkForce 615 | Start Here - Page 1
Epson as described on the back under "Any questions?". Note: The model name of your product may vary slightly from the one shown above. The included CD and documentation apply to all products in the series. Caution: Do not open ink cartridge and adjusting the control panel, see your Quick Guide. - Epson WorkForce 615 | Start Here - Page 2
set the time. 8 If you selected 12h as the time format, press or to select AM or PM. 9 Press OK when done. Note: You can change the date and time settings by pressing the Home button, selecting Setup, selecting Printer Setup, then selecting Date/Time. - Epson WorkForce 615 | Start Here - Page 3
them. 4 Remove only the yellow tape from each cartridge. Caution: Don't remove any other seals or the cartridges may leak. 5 Insert the cartridges in the holder for each color. 6 Press each cartridge down until it clicks. 7 Close the ink cartridge cover and press it down until it clicks. 8 Lower - Epson WorkForce 615 | Start Here - Page 4
5 Load paper 1 Open the paper support and pull up the extensions. 2 Extend the output tray and raise the stopper. Note: If you are using legal-size paper, do not raise the stopper. 3 Hold the feeder guard forward, then squeeze the edge guide and slide it to the left. 4 Load paper against the right - Epson WorkForce 615 | Start Here - Page 5
, click Cancel and disconnect the USB cable. You can't install your software that way. 2 Insert the WorkForce 610 Series software CD. With Windows Vista®, if you see the AutoPlay window, click Run SETUP.EXE. When you see the User Account Control screen, click Continue. 3 Click Install and follow the - Epson WorkForce 615 | Start Here - Page 6
Quick Guide or online Epson Information Center. Macintosh® 1 Make sure the product is NOT CONNECTED to your computer. 2 Insert the WorkForce 610 Series software CD. 3 Double-click the Epson icon. 4 Click Install and follow the on-screen instructions. 5 When you see this screen, select Install driver - Epson WorkForce 615 | Start Here - Page 7
online troubleshooting advice, and software downloads. You can also purchase paper and ink. Network Installation Guide and Video Instructions on configuring the product for a network. For a video tutorial and other information about setting up a wireless network, go to: epson.com/support/wireless On - Epson WorkForce 615 | Start Here - Page 8
information is subject to change without notice. © 2009 Epson America, Inc. 4/09 CPD-27495 Cut out the card to the right and keep it with you when purchasing replacement ink cartridges. Printed in XXXXXX Printed in XXXXXX WORKFORCE® 610 Series Ink Cartridges Color Black Standardcapacity 69
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
If anything is missing, contact Epson as described on the back under
“Any questions?”.
Note:
The model name of your product may vary slightly from the one shown above.
The included CD and documentation apply to all products in the series.
Caution:
Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
Canada only:
For French speakers, remove stickers from the backing sheet and place
over corresponding text on the control panel.
Remove all protective materials.
Unpack
1
Start Here
1
Connect the power cable.
Caution:
Do not connect to your computer yet.
2
Lift the control panel to raise it, then press the
On
button.
On
Note:
To lower the control panel, squeeze the release lever underneath and push the
control panel down. For more information on using and adjusting the control panel,
see your
Quick Guide
.
Turn on and adjust
2
Series
(Included for
Canada only)
Phone cord
Power cord