Epson WorkForce Pro WF-C5710 Start Here - Installation Guide for U.S. and Cana

Epson WorkForce Pro WF-C5710 Manual

Epson WorkForce Pro WF-C5710 manual content summary:

  • 1
  • 2
  • 3
  • 4

Start Here
Read these instructions before using your product.
Note for Spanish speakers/Nota para hispanohablantes:
Para obtener instrucciones de configuración en español, consulte la
Guía de instalación
en
www.epson.com/support/wfc5710sp
o
www.epson.com/support/wfc5790sp
(requiere una conexión a Internet).
Important Safety Instructions:
When using telephone equipment, you
should always follow basic safety precautions to reduce the risk of fire,
electric shock, and personal injury, including the following:
• Do not use the Epson
®
product near water.
• Always keep this guide handy.
• Avoid using a telephone during an electrical storm. There may be a
remote risk of electric shock from lightning.
• Do not use a telephone to report a gas leak in the vicinity of the leak.
Caution:
To reduce the risk of fire, use only a No. 26 AWG or larger
telecommunication line cord.
1
Unpack
1
Remove all protective materials from the product.
2
Lift up the scanner unit and remove all protective materials
from inside the product, then close the scanner unit.
3
Insert the output tray.
2
Turn on and configure
1
Connect the power cord to the back of the product and to
an electrical outlet.
Caution:
Do not connect to your computer yet.
2
Turn on the product.
3
Select your language, country, and time on the LCD
screen.
Note:
You can change these settings later using the product’s
control panel. For more information, see the online
User’s Guide
.
3
Install ink supply units
(ink packs)
Note:
• The product is designed for use with Epson ink packs only, not
third-party ink.
• The ink packs included with the product are designed for product
setup and not for resale.
After some ink is used for charging, the rest is available for printing.
Caution:
Keep the ink packs out of the reach of children and do not
drink the ink.
1
Unlock and open the ink pack tray cover, then remove the
packing material.
WF-C5710/WF-C5790