Epson WorkForce Pro WF-C5890 Start Here - Installation Guide

Epson WorkForce Pro WF-C5890 Manual

Epson WorkForce Pro WF-C5890 manual content summary:

  • Epson WorkForce Pro WF-C5890 | Start Here - Installation Guide - Page 1
    or scanner unit. WF-C5390 WF-C5890 IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User's Guide. Note: This printer is designed for use with Epson® ink packs only, not third-party ink. For important ink information, visit http
  • Epson WorkForce Pro WF-C5890 | Start Here - Installation Guide - Page 2
    paper feed slot or ADF (WF-C5890). 1 Make sure the product is done charging the ink, then pull out the paper cassette. 5 Move the handle forward, place the ink pack into the ink pack tray, then move the handle back to its original position. 2 Slide the side edge guides all the way out and set
  • Epson WorkForce Pro WF-C5890 | Start Here - Installation Guide - Page 3
    2 Download and run your product's software package: WF-C5390 http://epson.com/support/wfc5390 (U.S.) http://epson.ca/support/wfc5390 (Canada) WF-C5890 http://epson.com/support/wfc5890 (U.S.) http://epson.ca/support/wfc5890 (Canada) 3 Follow the instructions on the computer screen to run the setup
  • Epson WorkForce Pro WF-C5890 | Start Here - Installation Guide - Page 4
    . Call 800-GO-EPSON (800-463-7766). WF-C5390/WF-C5890 replacement ink packs Color Standardcapacity Highcapacity Extra highcapacity Black T10S100 T10W100 T10Y100 Cyan T10S200 T10W200 Magenta T10S300 T10W300 Yellow T10S400 T10W400 Any questions? User's Guide Windows: Click the
  • 1
  • 2
  • 3
  • 4

IMPORTANT:
Before using this product, make sure you read
these instructions and the safety instructions in the online
User’s
Guide
.
Note:
This printer is designed for use with Epson
®
ink packs only, not
third-party ink. For important ink information, visit
http://epson.com/epsonink
(U.S.) or
http://epson.ca/epsonink
(Canada)
or see your printer box.
Important Safety Instructions:
When using telephone equipment, you
should always follow basic safety precautions to reduce the risk of fire,
electric shock, and personal injury, including the following:
Do not use the Epson product near water.
Always keep this guide handy.
Avoid using a telephone during an electrical storm. There may be a
remote risk of electric shock from lightning.
Do not use a telephone to report a gas leak in the vicinity of the leak.
Caution:
To reduce the risk of fire, use only a No. 26 AWG or larger
telecommunication line cord.
The illustrations show the WF-C5890, but the steps are the same
for
the WF-C5390, unless otherwise specified.
1
Unpack
WF-C5890
French control
panel sticker
WF-C5390
French control
panel sticker
Warning:
The product is heavy and should be lifted and moved by two
people.
Note:
If you purchased an optional paper cassette, see the online
User’s Guide
for installation instructions.
1
Remove all protective materials from the product.
Note:
Keep the two protective pieces shown after removing
them from inside the product. You will need them if you transport
your product. See the online
User’s Guide
for transportation
instructions.
2
Lift up the printer cover (WF-C5390
) or scanner unit
(WF-C5890) and remove all protective materials from inside
the product, then close the printer cover or scanner unit.
WF-C5890
WF-C5390
3
Insert the output tray, then set it down gently.
2
Turn on and configure
1
Connect the power cord to the back of the product and to
an electrical outlet.
WF-C5390
WF-C5890
Caution:
Do not connect to your computer yet.
2
Raise the control panel and turn on the product.
Note:
If an error code appears, turn off the product and check that
no protective material has been left inside the product.
3
WF-C5390:
Select your language, date, and time using the
arrow buttons and
OK
button.
WF-C5890:
Select your language, country, date, and time
on the LCD screen.
Note:
You can change these settings later using the product’s
control panel. For more information, see the online
User’s Guide
.
Start Here
WF-C5390/WF-C5890