Epson WorkForce Pro WF-M5299 Start Here - Installation Guide for Latin America

Epson WorkForce Pro WF-M5299 Manual

View all Epson WorkForce Pro WF-M5299 manuals Add to My Manuals Save this manual to your list of manuals

• 
  1
• 
  2
• 
  3
• 
  4

Match case Limit results 1 per page

---

100% Actual Size Fit Width Fit Height Fit Page Automatic

Start Here

IMPORTANT:

Before using this product, make sure you read these

instructions and the safety instructions in the online

User’s Guide

.

Note:

This printer is designed for use with Epson

®

ink packs only,

not third-party ink. For important ink information, visit

www.latin.epson.com/tintaepson

or see your printer box.

1

Unpack

Warning:

The product is heavy and should be lifted and moved by

two people.

1

Remove all protective materials from the product.

2

Raise the printer cover and remove all protective materials

from inside the product, then close the printer cover.

3

Insert the output tray, then set it down gently.

2

Turn on and configure

1

Connect the power cord to the back of the product and to

an electrical outlet.

Caution:

Do not connect to your computer yet.

2

Turn on the product.

3

Select your language and time on the LCD screen.

Note:

You can change these settings later using the product’s

control panel. For more information, see the online

User’s Guide

.

3

Install ink supply unit

(ink pack)

Note:

The included initial ink pack is designed for reliable printer setup

and cannot be used as a replacement pack or resold. After setup, the

remaining ink is available for printing.

Caution:

Keep ink packs out of the reach of children and do not drink

the ink.

1

Unlock and open the ink pack tray cover, then remove the

packing material.

2

Press the ink pack tray to release it, then pull the tray out.

WF-M5299