Epson WorkForce ST-3000 Start Here - Installation Guide
Epson WorkForce ST-3000 Manual
 |
View all Epson WorkForce ST-3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson WorkForce ST-3000 manual content summary:
- Epson WorkForce ST-3000 | Start Here - Installation Guide - Page 1
ST-3000/ST-4000 Start Here IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User's Guide. Important Safety Instructions: When using telephone equipment, you should always follow basic safety precautions to reduce the risk of fire, - Epson WorkForce ST-3000 | Start Here - Installation Guide - Page 2
's Guide. Follow steps 11 and 12 to continue ink charging. 11 When the message to see the Start Here sheet appears on the LCD screen: ST-3000: Select Next and follow the on-screen instructions to reset the ink levels. 16 Follow the on-screen instructions to adjust the print quality. Press the - Epson WorkForce ST-3000 | Start Here - Installation Guide - Page 3
USB cable. 2 Download and run your product's software package: ST-3000 www.epson.com/support/st3000 (U.S.) www.epson.ca/support/st3000 (Canada) ST-4000 www.epson.com/support/st4000 (U.S.) www.epson.ca/support/st4000 (Canada) 3 Follow the instructions on the computer screen to run the setup - Epson WorkForce ST-3000 | Start Here - Installation Guide - Page 4
any button (ST-3000) or touch the screen (ST-4000) to wake it from sleep mode. Setup is unable to find my product after connecting it with a USB cable. Make sure your product is on and securely connected. Technical support Visit www.epson.com/support (U.S.) or www.epson.ca/support (Canada) and
-
1 -
2 -
3 -
4
 |
 |
Start Here
IMPORTANT:
Before using this product, make sure you read
these instructions and the safety instructions in the online
User’s
Guide
.
Important Safety Instructions:
When using telephone equipment, you
should always follow basic safety precautions to reduce the risk of fire,
electric shock, and personal injury, including the following:
•
Do not use the Epson
®
product near water.
•
Always keep this guide handy.
•
Avoid using a telephone during an electrical storm. There may be a
remote risk of electric shock from lightning.
•
Do not use a telephone to report a gas leak in the vicinity of the leak.
Caution:
To reduce the risk of fire, use only a No. 26 AWG or larger
telecommunication line cord.
The illustrations show the ST-4000, but the steps are the same
for all models, unless otherwise specified.
1
Unpack
Note:
Do not open the ink bottles until you are ready to fill the ink
tanks. The ink bottles are vacuum packed to maintain reliability.
1
Remove all protective materials from the product.
2
Lift up the scanner unit. Remove all protective materials
from inside the product.
Caution:
Do not touch the flat white cable or the ink tubes and
their translucent cover.
2
Fill ink tanks
Note:
This product requires careful handling of ink. If ink spills, wipe
it off immediately with a damp towel to avoid permanent stains. If ink
gets on your clothes or belongings, it may not come off.
Caution:
Keep the ink bottles out of the reach of children and do not
drink the ink.
1
Open the ink tank cover, then open the cap for the ink
tank you are going to fill.
2
Unpack one of the ink bottles. Hold the ink bottle upright
and slowly turn the bottle cap to remove it.
Caution:
Do not shake or squeeze the ink bottles. Do not touch
the top of the ink bottle after its cap is removed.
3
Position the top of the ink bottle along the slot in front of
the filling port, then slowly stand the bottle up to insert it.
Note:
Refer to the color-coded sticker to identify the color of
each tank. Do not force the bottles into position; they are keyed
for each color.
ST-3000/ST-4000