Epson WorkForce ST-C4100 Start Here - Installation Guide
Epson WorkForce ST-C4100 Manual
 |
View all Epson WorkForce ST-C4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson WorkForce ST-C4100 manual content summary:
- Epson WorkForce ST-C4100 | Start Here - Installation Guide - Page 1
computer yet. 3 Launch the app and follow its instructions to set up your product. For information on setting up the fax, connecting your product to a computer, using voice-activated printing, or solving problems, or for details on reaching Epson support, see the sections on the back of this sheet - Epson WorkForce ST-C4100 | Start Here - Installation Guide - Page 2
and hold the help button for 5 seconds. 13 Follow the on-screen instructions to start ink charging. Ink charging takes about 10 minutes. Note: When the off the ink tanks with any remaining ink. See the online User's Guide for instructions. Caution: Do not unplug or turn off the product, or raise - Epson WorkForce ST-C4100 | Start Here - Installation Guide - Page 3
wall jack and to the LINE port on your product. See the online User's Guide for more information. 2 Select Proceed on the LCD screen to set up the fax ™, go to www.epson.com/support/chromebookprint (U.S.) or www.epson.ca/support/chromebookprint (Canada) for instructions. 1 Make sure the product - Epson WorkForce ST-C4100 | Start Here - Installation Guide - Page 4
) correctly. Be sure to enter your password in the correct case. • Print a network connection report to identify network problems and solutions. See your online User's Guide for instructions. There are lines or incorrect colors in my printouts. Run a nozzle check to see if there are any any gaps
-
1 -
2 -
3 -
4
 |
 |
IMPORTANT:
Before using this product, make sure you read
these instructions and the safety instructions in the online
User’s
Guide
.
Important Safety Instructions:
When using telephone equipment, you
should always follow basic safety precautions to reduce the risk of fire,
electric shock, and personal injury, including the following:
•
Do not use the Epson
®
product near water.
•
Always keep this guide handy.
•
Avoid using a telephone during an electrical storm. There may be a
remote risk of electric shock from lightning.
•
Do not use a telephone to report a gas leak in the vicinity of the leak.
Caution:
To reduce the risk of fire, use only a No. 26 AWG or larger
telecommunication line cord.
1
Unpack
Note:
Do not open the ink bottles until you are ready to fill the ink
tanks. The ink bottles are vacuum packed to maintain reliability.
1
Remove all protective materials from the product.
Caution:
Do not touch the flat white cable or the ink tubes and
their translucent cover.
2
Connect the power cord to the back of the product and to
an electrical outlet.
Caution:
Do not connect to your computer yet.
2
Choose a setup method
The Epson Smart Panel
®
app can help you set up your printer
through an interactive, step-by-step process using your
smartphone or tablet.
If you do not want to
use a mobile device for
setup, skip to the “Fill ink
tanks” section below.
To use your mobile device
for setup, continue to
step 1.
or
1
Download the Epson Smart Panel app
from your device’s app store. Do not
launch the app yet.
2
Press the
power button to turn on the product.
Note:
Do not connect your product to your computer yet.
3
Launch the app and follow its instructions to set up your
product.
For information on setting up the fax, connecting your product
to a computer, using voice-activated printing, or solving
problems, or for details on reaching Epson support, see the
sections on the back of this sheet.
3
Fill ink tanks
Warning:
Keep the ink bottles out of the reach of children and do not
drink the ink.
Caution:
This product requires careful handling of ink. If ink spills,
wipe it off immediately with a damp towel to avoid permanent stains.
If ink gets on your clothes or belongings, it may not come off.
Note:
•
Epson cannot guarantee the quality or reliability of third-party ink.
•
Use the ink bottles included with the printer to set up the product.
Part of the ink will be used to charge the print head. These bottles
may print fewer pages compared with replacement ink bottles.
•
Epson strongly recommends the use of genuine ink to ensure
optimal print quality and performance.
1
With the scanner unit raised, open the ink tank cover, then
open the cap for the black (BK) ink tank.
Note:
Refer to the color-coded sticker to identify the color of
each tank.
Start Here
ST-C4100