Epson WorkForce ST-C8000 Start Here - Installation Guide
Epson WorkForce ST-C8000 Manual
 |
View all Epson WorkForce ST-C8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson WorkForce ST-C8000 manual content summary:
- Epson WorkForce ST-C8000 | Start Here - Installation Guide - Page 1
ST-C8000 Start Here IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User's Guide. Important Safety Instructions: When using telephone equipment, you should always follow basic safety precautions to reduce the risk of fire, - Epson WorkForce ST-C8000 | Start Here - Installation Guide - Page 2
disposing of the bottles. 15 Select Settings > Maintenance > Ink Level Setting and follow the on-screen instructions to reset the ink levels. 3 Load paper See the online User's Guide for information about loading capacity, available paper types and sizes, loading envelopes, and using the rear paper - Epson WorkForce ST-C8000 | Start Here - Installation Guide - Page 3
www.epson.com/support/stc8000 (U.S.) www.epson.ca/support/stc8000 (Canada) Epson Print Enabler or Mopria Print Service app from Google Play™. Any problems? Network setup was unsuccessful. • to identify network problems and solutions. See your online User's Guide for instructions. There are lines - Epson WorkForce ST-C8000 | Start Here - Installation Guide - Page 4
to access the online User's Guide. If you don't have a User's Guide icon, go to the Epson website, as described below. Technical support Visit www.epson.com/support/stc8000 (U.S.) or www.epson.ca/support/stc8000 (Canada) to download drivers, view videos and manuals, get FAQs, or contact Epson
-
1 -
2 -
3 -
4
 |
 |
Start Here
IMPORTANT:
Before using this product, make sure you read
these instructions and the safety instructions in the online
User’s
Guide
.
Important Safety Instructions:
When using telephone equipment, you
should always follow basic safety precautions to reduce the risk of fire,
electric shock, and personal injury, including the following:
• Do not use the Epson
®
product near water.
• Always keep this guide handy.
• Avoid using a telephone during an electrical storm. There may be a
remote risk of electric shock from lightning.
•
Do not use a telephone to report a gas leak in the vicinity of the leak.
Caution:
To reduce the risk of fire, use only a No. 26 AWG or larger
telecommunication line cord.
1
Unpack
Note:
Do not open the ink bottles until you are ready to fill the ink
tanks. The ink bottles are vacuum packed to maintain reliability.
1
Remove all protective materials from the product.
2
Lift up the scanner unit. Remove all protective materials
from inside the product.
Caution:
The printer ships with the transportation lock in the
printing position. Do not move it from the printing position.
3
Lower the scanner unit.
2
Fill ink tanks
Warning:
Keep the ink bottles out of the reach of children and do not
drink the ink.
Caution:
This product requires careful handling of ink. If ink spills,
wipe it off immediately with a damp towel to avoid permanent stains.
If ink gets on your clothes or belongings, it may not come off.
Note:
• Epson cannot guarantee the quality or reliability of third-party ink.
• Use the ink bottles included with the printer to set up the product.
• The included ink bottles are designed for reliable printer setup and
cannot be resold.
Epson recommends the use of Genuine Epson 542 pigment
inks. The use of any other inks may cause damage not covered
by the warranty, particularly if they are not pigment. Epson
cannot guarantee that non-Epson 542 inks are pigment, even if
labeled as compatible.
1
Open the ink tank cover, then open the cap for the
black ink tank.
Note:
Refer to the color-coded sticker on the ink tank unit to
identify the color of each tank.
2
Unpack the black (BK) ink bottle. Hold the ink bottle
upright and slowly turn the bottle cap to remove it.
Caution:
Do not shake or squeeze the ink bottles. Do not touch
the top of the ink bottle after its cap is removed.
ST-C8000