Epson WorkForce ST-M3000 Start Here - Installation Guide
Epson WorkForce ST-M3000 Manual
 |
View all Epson WorkForce ST-M3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson WorkForce ST-M3000 manual content summary:
- Epson WorkForce ST-M3000 | Start Here - Installation Guide - Page 1
ST-M3000 Start Here IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User's Guide. Important Safety Instructions: When using telephone equipment, you should always follow basic safety precautions to reduce the risk of fire, - Epson WorkForce ST-M3000 | Start Here - Installation Guide - Page 2
below the lowest line on the tank. Prolonged use when ink is below the lowest line could damage the product. See the online User's Guide for refilling instructions. 5 When the ink bottle is empty, remove the bottle and securely close it with the cap. Note: If an error code appears, turn off - Epson WorkForce ST-M3000 | Start Here - Installation Guide - Page 3
you have an Ethernet cable (not included). PCL driver Download the software and see your online User's Guide for instructions. www.epson.com/support/stm3000 (U.S.) www.epson.ca/support/stm3000 (Canada) Mobile and voice-activated printing • Print directly from your iOS device. Simply connect your - Epson WorkForce ST-M3000 | Start Here - Installation Guide - Page 4
Service app from Google Play™. Any problems User's Guide for more support/stm3000videos (U.S.) or www.epson.ca/support/stm3000videos (Canada) to view support videos. Technical support Visit www.epson.com/support/stm3000 (U.S.) or www.epson.ca/support/stm3000 (Canada) to download drivers, view manuals
-
1 -
2 -
3 -
4
 |
 |
Start Here
IMPORTANT:
Before using this product, make sure you read
these instructions and the safety instructions in the online
User’s Guide
.
Important Safety Instructions:
When using telephone equipment, you
should always follow basic safety precautions to reduce the risk of fire,
electric shock, and personal injury, including the following:
• Do not use the Epson
®
product near water.
• Always keep this guide handy.
• Avoid using a telephone during an electrical storm. There may be a
remote risk of electric shock from lightning.
• Do not use a telephone to report a gas leak in the vicinity of the leak.
Caution:
To reduce the risk of fire, use only a No. 26 AWG or larger
telecommunication line cord.
1
Unpack
Make sure you keep the box shown above for use when
transporting the printer.
Caution:
Do not lift the product by gripping the scanner unit. Make
sure you lift using the handholds on the bottom of the product.
Note:
Do not open the ink bottle until you are ready to fill the ink tank.
The ink bottle is vacuum packed to maintain reliability.
1
Lift the printer cover until it clicks into place.
2
Remove all protective materials from the product.
Caution:
Do not touch the flat white cable, translucent film, or
the ink tubes.
3
Close the printer cover.
Note:
Do not connect the power cord yet.
2
Fill ink tank and charge
the ink
Warning:
Keep the ink bottle out of the reach of children and do not
drink the ink.
Caution:
This product requires careful handling of ink. If ink spills,
wipe it off immediately with a damp towel to avoid permanent stains. If
ink gets on your clothes or belongings, it may not come off.
Note:
• Epson cannot guarantee the quality or reliability of third-party ink.
• Use the ink bottle included with the printer to set up the product.
Part of the ink will be used to charge the print head. This bottle may
print fewer pages compared with replacement ink bottles.
1
Open the ink tank cover, then open the cap.
2
Unpack the ink bottle. Hold the ink bottle upright and
slowly turn the bottle cap to remove it.
Caution:
Do not shake or squeeze the ink bottle. Do not touch
the top of the ink bottle after its cap is removed.
3
Insert the ink bottle into the filling port, as shown below.
Note:
Do not force the bottle into position.
ST-M3000