Epson WorkForce WF-2530 Start Here
Epson WorkForce WF-2530 Manual
View all Epson WorkForce WF-2530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson WorkForce WF-2530 manual content summary:
- Epson WorkForce WF-2530 | Start Here - Page 1
press OK. 7 Press the number keys to enter the time. Then press or to select AM or PM, if necessary. 8 Press OK. Note: You can change the date and time settings using the printer's control panel. For more information, see the online User's Guide. 4 Install ink cartridges 1 Lift up the scanner unit - Epson WorkForce WF-2530 | Start Here - Page 2
the printer while it is priming or you'll waste ink. Do not press the Wi-Fi Setup button unless prompted during software installation. 5 Load paper 1 Flip the feeder guard forward. 2 Raise the paper support, pull out the output tray, then raise the paper stopper. 5 Slide the edge guide against - Epson WorkForce WF-2530 | Start Here - Page 3
(ABC), lowercase letters (abc), or numbers and symbols (123). Press to move to the next character. Press to delete. Press the OK button when you're finished entering your password. You see error messages on the printer's LCD screen. See your online User's Guide for troubleshooting information. - Epson WorkForce WF-2530 | Start Here - Page 4
. Genuine EPSON inks Look for the numbers below to find your cartridges. It's as easy as remembering your number! WF-2530 ink cartridges Color Standard-capacity Black 200 Cyan 200 Magenta 200 Yellow 200 High-capacity 200XL 200XL 200XL 200XL EPSON Connect™ Solutions, AirPrint, and
Start Here
Read these instructions before using your product.
Note for Spanish speakers/Nota para hispanohablantes:
Para
obtener instrucciones de configuración en español, consulte la
Guía de
instalación
en
www.epson.com/support/wf2530sp
(requiere una conexión
a Internet).
1
Unpack
French control
panel stickers
(included for
Canada only)
Caution:
Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials, including from inside the printer.
2
Turn on
1
Connect the power cord to the back of the printer and to an
electrical outlet.
Caution:
Do not connect to your computer yet.
2
Press the
power button.
3
Select settings
1
To select
English
as your language, press
OK
.
If you want to change the language, press
or
to
select it, then press
OK
.
2
Select your country/region and press
OK
.
3
Select
Summer
if Daylight Saving Time is in effect;
otherwise, select
Winter
. Press
OK
.
4
Select the date format and press
OK
.
5
Press the number keys to enter the date and press
OK
.
6
Select the time format (
12h
or
24h
) and press
OK
.
7
Press the number keys to enter the time. Then press
or
to select
AM
or
PM
, if necessary.
8
Press
OK
.
Note:
You can change the date and time settings using the printer’s
control panel. For more information, see the online
User’s Guide
.
4
Install ink cartridges
1
Lift up the scanner unit.
2
Shake the ink cartridges gently 4 or 5 times, then unpack
them.
Caution:
Don’t touch the green chip or small window on any
cartridge.
3
Remove only the yellow tape from each cartridge.
Caution:
Don’t remove any other seals or the cartridges may
leak.
*412319800*
*412319800*
WF-2530