Epson WorkForce WF-2930 Start Here - Installation Guide
Epson WorkForce WF-2930 Manual
 |
View all Epson WorkForce WF-2930 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson WorkForce WF-2930 manual content summary:
- Epson WorkForce WF-2930 | Start Here - Installation Guide - Page 1
sure you read these instructions and the safety instructions in the online User's Guide. Note: This printer instructions to set up your product. For information on connecting your product to a computer, using voice-activated printing, or solving problems, or for details on reaching Epson support - Epson WorkForce WF-2930 | Start Here - Installation Guide - Page 2
the product's control panel. For more information, see the online User's Guide. 4 Install ink cartridges Caution: Keep the ink cartridges out the reach to consent to participating in such programs. 8 Follow the on-screen instructions to adjust the print quality of your product. Note: • You need - Epson WorkForce WF-2930 | Start Here - Installation Guide - Page 3
http://epson.com/support/chromebookprint (U.S.) or http://epson.ca/support/chromebookprint (Canada) for instructions. Firmware Update Notice wall jack and to the LINE port on your product. See the online User's Guide for more information. 2 If prompted, use the control panel buttons to select - Epson WorkForce WF-2930 | Start Here - Installation Guide - Page 4
require the Epson Print Enabler or Mopria Print Service app from Google Play™. Any problems? Network setup was unsuccessful. • Print a network connection report to identify network problems and solutions. See your online User's Guide for instructions. • Make sure you select the right network name
-
1 -
2 -
3 -
4
 |
 |
Start Here
IMPORTANT:
Before using this product, make sure you read
these instructions and the safety instructions in the online
User’s Guide
.
Note:
This printer is designed for use with Epson
®
cartridges only, not
third-party cartridges or ink. For important ink information, visit
http://epson.com/epsonink
(U.S.) or
http://epson.ca/epsonink
(Canada) or see your printer box.
Important Safety Instructions:
When using telephone equipment, you
should always follow basic safety precautions to reduce the risk of fire,
electric shock, and personal injury, including the following:
•
Do not use the Epson product near water.
•
Always keep this guide handy.
•
Avoid using a telephone during an electrical storm. There may be a
remote risk of electric shock from lightning.
•
Do not use a telephone to report a gas leak in the vicinity of the leak.
Caution:
To reduce the risk of fire, use only a No. 26 AWG or larger
telecommunication line cord.
The illustrations show the WF-2950, but the steps are the same
for the WF-2930, unless otherwise specified.
1
Unpack
Note:
Do not open the ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
1
Remove all protective materials from the product and lift
up the scanner unit until it locks into place.
2
Remove all protective materials from inside the product.
Caution:
Do not touch the flat white cable.
3
Lower the scanner unit: Lift the scanner unit up slightly
and lower it. When the scanner unit catches, lift it up
again and lower it completely.
Note:
The scanner unit must be lowered completely before it can
be opened again.
4
Connect the power cord to the back of the product and to
an electrical outlet.
Caution:
Do not connect to your computer yet.
2
Choose a setup method
The Epson Smart Panel
®
app can help you set up your printer
through an interactive, step-by-step process using your
smartphone or tablet.
If you do not want to use
a mobile device for setup,
skip to the “Turn on and
configure” section.
To use your mobile device
for setup, continue to
step 1.
OR
1
Download the Epson Smart Panel app
from your device’s app store. Do not
launch the app yet.
2
Hold the
power button until it lights up to turn on the
product.
Note:
Do not connect your product to your computer yet.
3
Launch the app and follow its instructions to set up your
product. If necessary, tap the
+
icon on the top right
corner of the app’s home screen, tap
Start setting up
,
and follow the instructions to set up your product.
For information on connecting your product to a computer,
using voice-activated printing, or solving problems, or for
details on reaching Epson support, see the sections on the
back of this sheet.
WF-2930/WF-2950