Epson WorkForce WF-7520 Start Here
Epson WorkForce WF-7520 Manual
 |
View all Epson WorkForce WF-7520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson WorkForce WF-7520 manual content summary:
- Epson WorkForce WF-7520 | Start Here - Page 1
AM or PM, if necessary. 8 Press OK. Note: You can change the date and time settings using the printer's control panel. For more information, see the online User's Guide. Caution: Do not connect to your computer yet. 4 Install ink cartridges 1 Lift up the scanner unit. *412201800* *412201800* - Epson WorkForce WF-7520 | Start Here - Page 2
is under the tabs on the edge guides. 8 Lower the scanner unit. 9 Press OK to prime the ink delivery system. This takes about 5 minutes. Note: Your printer ships with full cartridges and part of the ink from the first cartridges is used for priming the printer. Caution: Don't turn off the - Epson WorkForce WF-7520 | Start Here - Page 3
the Quick Guide for more follow the instructions on your computer Epson Technical Support"). Caution: Be sure to close your other programs, including screen savers and virus protection programs, before beginning this software installation. 1 Make sure the printer problems? If you experience problems - Epson WorkForce WF-7520 | Start Here - Page 4
have a User's Guide icon, you can install it from the CD or go to the Epson website, as described under "Epson technical support." Epson technical support Visit epson.com/support (U.S.) or epson.ca/support (Canada) where you can download drivers, view manuals, get FAQs, or e-mail Epson. You may also
-
1 -
2 -
3 -
4
 |
 |
Start Here
Read these instructions before using your product.
1
Unpack
French control
panel stickers
Caution:
Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Note:
These illustrations show the WF-7520, but the instructions are the
same for the WF-7510 unless otherwise noted.
Remove all protective materials.
Caution:
Do not remove the plastic strip as
shown. It is part of the Automatic Document
Feeder.
2
Turn on
1
Connect the power cord to the back of the printer and to an
electrical outlet.
Caution:
Do not connect to your computer yet.
2
Squeeze the release bar underneath to raise the control
panel. Then press the
On
button.
Note:
If you want to lower the control panel, squeeze the
release bar underneath
.
Caution:
To avoid damaging the printer, make sure you
squeeze the release bar to lower the control panel. Don’t try to
push it down without releasing it.
3
Select settings
1
To select
English
as your language, press
OK
.
If you want to change the language, press
or
to
select it, then press
OK
.
2
Select your country/region and press
OK
.
3
Select your
Daylight Saving Time
setting (
Winter/
Summer
), and press
OK
.
4
Select the date format and press
OK
.
5
Press the number keys to enter the date and press
OK
.
6
Select the time format (
12h
or
24h
) and press
OK
.
7
Press the number keys to enter the time. Then press
or
to select
AM
or
PM
, if necessary.
8
Press
OK
.
Note:
You can change the date and time settings using the printer’s
control panel. For more information, see the online
User’s Guide
.
4
Install ink cartridges
1
Lift up the scanner unit.
*412201800*
*412201800*