Epson XP-310 User Manual - Page 31
Wi-Fi Protected Setup (WPS), Using WPS to Connect to a Network - not printing anything
View all Epson XP-310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
7. Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the LCD screen, then enter the password shown. 8. Press the OK button to exit. You see either an AP or D connection symbol on the LCD screen and should be able to print directly to your product from your computer or device. Note: If the AP or D connection symbol is not displayed on the LCD screen, Wi-Fi Direct mode is not enabled. Repeat these steps to try again. Parent topic: Wi-Fi Direct Mode Setup Wi-Fi Protected Setup (WPS) If your network uses a WPS-enabled wireless router or access point, you can quickly connect your product to the network using Wi-Fi Protected Setup (WPS). Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access point. If there is no hardware button, there may be a virtual WPS button in the software for the device. Check your network product documentation for details. Using WPS to Connect to a Network Parent topic: Wi-Fi Networking Using WPS to Connect to a Network If you have a WPS-enabled router or access point, you can use Wi-Fi Protected Setup (WPS) to connect your product to the network. 1. Press the WPS button on your router. 2. On the product, press the home button, if necessary. 31