Epson XP-400 Start Here

Epson XP-400 Manual

Epson XP-400 manual content summary:

  • Epson XP-400 | Start Here - Page 1
    , see the online User's Guide. 3 Install ink cartridges Note: Don't load paper yet. 1 Lift up the scanner unit, and wait until the ink cartridge holder stops moving. 2 Turn on and adjust 1 Raise the paper support, then connect the power cord to the back of the printer and to an electrical outlet
  • Epson XP-400 | Start Here - Page 2
    N ote: The cartridges included with the printer are designed for printer setup and not for resale. After some ink is used for priming, the rest is available for printing only in the same printer. C aution: Don't turn off the printer while it is priming or you'll waste ink. 4 Load paper 1 Flip the
  • Epson XP-400 | Start Here - Page 3
    download the software from the Epson website. See "EPSON technical support." Caution: Be sure to close your other programs, including any screen savers and virus protection software, before beginning this software installation. 1 Make sure the printer is NOT CONNECTED to your computer. Windows
  • Epson XP-400 | Start Here - Page 4
    the numbers below to find your cartridges. It's as easy as remembering your number! XP-400 ink cartridges Color Black Cyan Magenta Yellow Standard-capacity 200 200 200 200 High-capacity 200XL 200XL 200XL 200XL EPSON Connect™, AirPrint, and Google Cloud Print™ Print and share from anywhere. Use
  • 1
  • 2
  • 3
  • 4

Read these instructions before using your product.
1
Unpack
Caution:
Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials, including from inside the printer.
2
Turn on and adjust
1
Raise the paper support, then connect the power cord to
the back of the printer and to an electrical outlet.
Caution:
Do not connect to your computer yet.
2
Raise the control panel, then press the
power button.
Note:
If you want to lower the control panel, squeeze the release
bar underneath.
Caution:
Do not lower the control panel without first squeezing the
release bar underneath or you may damage the product.
3
To select
English
as your language, press
OK
.
If you want to change the language, press
or
to select it, then
press
OK
.
Note:
You can change the language later using the product’s
control panel. For more information, see the online
User’s Guide
.
3
Install ink cartridges
Note:
Don’t load paper yet.
1
Lift up the scanner unit, and wait until the ink cartridge
holder stops moving.
2
Shake the ink cartridges gently 4 or 5 times, then
unpack them.
3
Remove only the yellow tape from each cartridge.
Caution:
Don’t remove any other seals or the cartridges may leak.
4
Insert the cartridges in the holder for each color, and press
each cartridge down until it clicks.
*412343800*
*412343800*
XP-400 Small-in-One
Printer
Start Here