Eureka LightForce 300 4717AVZ Quick Start Guide
Eureka LightForce 300 4717AVZ Manual
 |
View all Eureka LightForce 300 4717AVZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Eureka LightForce 300 4717AVZ manual content summary:
- Eureka LightForce 300 4717AVZ | Quick Start Guide - Page 1
START GUIDE Thank you for purchasing your new Eureka vacuum! Before returning, call Eureka Customer Service HELPLINE Hose Easy assembly ! READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. PROBLEM SOLVING Refer to Owner's Guide. MAINTENANCE SCHEDULE Refer to back of dust cup or Owner
-
1
 |
 |
What’s in the carton
STEP
1
1
Easy assembly
Slide vacuum back onto base.
Fasten with one long screw.
Slide tool caddy onto back.
Fasten with two short screws.
Slide handle onto tool caddy.
Fasten with one long screw.
Attach hose to vacuum back.
Fasten with two short screws.
STEP
2
2
Get ready to vacuum
Step on power switch to turn
on; step on again to turn off.
Step on handle release to
lower handle into position.
If vacuum is hard to push,
raise carpet setting.
STEP
3
3
PROBLEM SOLVING
Refer to Owner’s Guide.
MAINTENANCE SCHEDULE
Refer to back of dust cup or Owner’s Guide.
QUICK START GUIDE
4710 Series
Before returning, call
Eureka Customer Service
HELPLINE
1-800-282-2886
8 a.m. to 7:30 p.m. (CST), Monday - Friday
10 a.m. to 6:30 p.m. (CST), Saturday - Sunday
www.eureka.com
T
h
a
n
k
y
o
u
f
o
r
p
u
r
c
h
a
s
i
n
g
y
o
u
r
n
e
w
E
u
r
e
k
a
v
a
c
u
u
m
!
Attach hose retainer with one
short screw. Pull retainer out
to position hose.
Push end of base hose into
opening on vacuum base.
Place dust cup on base
and snap into place.
Wrap cord. Place wand/crevice
tool in holder on side
of vacuum.
Place dusting brush on
back of handle.
Some models
: Snap
Power Paw
®
into clip on front.
Vacuum Base
Dust Cup
and Filter
Handle
Important Safeguards
Dusting
Brush
Hose
Retainer
Vacuum Back
and Base Hose
Tool Caddy
2 Long and
5 Short Screws
Hose
Extension
Wand and
Crevice Tool
REGISTRATION
OWNER’S
GUIDE
!
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
Moving parts! Assemble the vacuum cleaner before using.
Pull up cord and push into
lower cord retainer.
Push cord into upper cord
retainer. Place hose over
hose hook on handle.
Power
Paw
®
Stair Hose
Self-Cleaning
Duster
Duster
Chamber
SPECIAL FEATURES
Available on some models
Use Phillips
and flat-head
screwdrivers.
Some models
: Secure bottom of
duster chamber to hose retainer.
Tighten with flat-head screwdriver.
Push end of hose into duster
chamber. Place duster in
chamber and snap into place.
For models without a duster,
connect hose into lower
base hose.
Lift latch to remove dust cup.
Empty after each use.
For accessories: Loosen lower
end of hose from vacuum and
attach tool.
Handle
with
Power Paw
®