Eureka Powerline 4773AZ Quick Start Guide

Eureka Powerline 4773AZ Manual

Get Eureka Powerline 4773AZ PDF manuals and user guides View all Eureka Powerline 4773AZ manuals
Add to My Manuals
Save this manual to your list of manuals

Eureka Powerline 4773AZ manual content summary:

  • Eureka Powerline 4773AZ | Quick Start Guide - Page 1
    4770 Series QUICK START GUIDE Thank you for purchasing your new Eureka vacuum! Important instructions For easy assembly, please take a few moments to read this Quick Start Guide. If you have questions about your new vacuum, please contact our customer service helpline at 1-800-282-2886. We're here
  • 1
What’s in the carton
STEP
1
1
Easy assembly
Slide vacuum back onto base.
Fasten with one long screw.
Slide tool caddy onto back.
Fasten with two short screws.
Slide handle onto tool caddy.
Fasten with one long screw.
Attach hose to vacuum back.
Fasten with two short screws.
STEP
2
2
Get ready to vacuum
Step on power switch to turn
on; step on again to turn off.
Step on handle release to
lower handle into position.
If vacuum is hard to push,
raise carpet setting.
STEP
3
3
PROBLEM SOLVING
Refer to Owner’s Guide.
MAINTENANCE SCHEDULE
Refer to back of dust cup or Owner’s Guide.
Attach hose retainer with one
short screw. Pull retainer out
to position hose.
Push end of base hose into
opening on vacuum base.
Place dust cup on base
and snap into place.
Wrap cord. Place wand/crevice
tool in holder on side
of vacuum.
Place dusting brush on
back of handle.
Snap turbo nozzle into
clip on front.
Vacuum base
Dust cup
and filter
Important safeguards
Dusting
brush
Hose
retainer
Vacuum back
and base hose
Tool caddy
2 long and
5 short screws
Hose
Extension
wand and
crevice tool
REGISTRATION
OWNER’S
GUIDE
!
Pull up cord and push into
lower cord retainer.
Push cord into upper cord
retainer. Place hose over
hose hook on handle.
Stair hose
Self-cleaning
duster
Duster
chamber
SPECIAL FEATURES
Available on some models
Use Phillips
and flat-head
screwdrivers.
Some models
: Secure bottom of
duster chamber to hose retainer.
Tighten with flat-head screwdriver.
Push end of hose into duster
chamber. Place duster in
chamber and snap into place.
Lift latch to remove dust cup.
Empty after each use.
For accessories: Loosen lower end of
hose from vacuum and attach tool.
Handle with
turbo nozzle
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
Moving parts! Assemble the vacuum cleaner before using.
Thank you for purchasing your new Eureka vacuum!
4770 Series
Helpline Hours:
8 a.m. to 7:30 p.m. (CST), Monday - Friday
10 a.m. to 6:30 p.m. (CST), Saturday - Sunday
If you have questions about your new vacuum,
please contact our customer service helpline at
1-800-282-2886
.
We’re here to help!
Important instructions
For easy assembly, please take a few
moments to read this Quick Start Guide.
QUICK START GUIDE
www.eureka.com