Fisher and Paykel DD24DCHTX6 Installation Instructions
Fisher and Paykel DD24DCHTX6 Manual
View all Fisher and Paykel DD24DCHTX6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Fisher and Paykel DD24DCHTX6 manual content summary:
- Fisher and Paykel DD24DCHTX6 | Installation Instructions - Page 1
INSTALLATION INSTRUCTIONS DishDrawerTM dishwasher DD24D 7 & DD24DT 7 models US CA 590204D 04.13 - Fisher and Paykel DD24DCHTX6 | Installation Instructions - Page 2
SECURE BY DRAWER REMOVAL DRAWER REMOVAL RECOMMENDED ALTERNATIVE METHOD (a) METHOD (b) CHOOSE DRAINAGE OPTION CONNECT TO WATER & ELECTRICITY FINAL CHECKLIST TROUBLESHOOTING CAVITY PREPARATION MAXIMUM DISTANCE OF HOSES & CORD FROM CHASSIS EDGE SECURE WITHOUT SECURE BY DRAWER REMOVAL DRAWER REMOVAL - Fisher and Paykel DD24DCHTX6 | Installation Instructions - Page 3
you must bring the vehicle, boat or mobile facility containing the product to the service shop at your expense or pay the service technician's travel to the location of the product. SAVE THESE INSTRUCTIONS 2b ADDITIONAL SAFETY AND WARNINGS - INTEGRATED MODELS ONLY WARNING! Electrical Shock Hazard - Fisher and Paykel DD24DCHTX6 | Installation Instructions - Page 4
3a PARTS SUPPLIED - ALL MODELS 4 Drain hose support (1) Drain hose joiner (1) Wire clip (2) (for securing Drain SUPPLIED WITH INTEGRATED MODELS If the Drain hoses supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain - Fisher and Paykel DD24DCHTX6 | Installation Instructions - Page 5
4 OPTIONALLY HARD WIRING PRIOR TO INSTALLATION 5 4a REMOVE THE LOWER DRAWER 43 4b REMOVE THE ACCESS COVER & POWER CORD 4 1 2 41"0(100m0mmm) Access cover To prevent kinked hoses, we recommend rotating the drawer anti-clockwise and resting 5it on its side after removal. Press the release tabs in - Fisher and Paykel DD24DCHTX6 | Installation Instructions - Page 6
5 PRODUCT DIMENSIONS O KI AN LO Plan DC F Side G B 6 E M J Product dimensions inches (mm) H STANDARD HEIGHT MODELS TALL HEIGHT MODELS Integrated Designer Classic Integrated Designer Classic A overall height1 of product 32 5⁄16 - 34 5⁄8"(820-880)2 32 5⁄16 - 34 5⁄8"(820-880)2 32 5⁄16 - 34 - Fisher and Paykel DD24DCHTX6 | Installation Instructions - Page 7
6 CABINETRY DIMENSIONS S Side P T 7 Q R Plan Minimum clearances from adjacent cabinetry min. ½" (13 mm) clearance from a corner cupboard min. 1⁄16" (2 mm) clearance to adjacent cupboard door Cabinetry dimensions inches (mm) STANDARD HEIGHT MODELS TALL HEIGHT MODELS Integrated Designer - Fisher and Paykel DD24DCHTX6 | Installation Instructions - Page 8
7a STANDARD HEIGHT INTEGRATED MODELS ONLY - CUSTOM PANEL CALCULATIONS 8 The following calculations assume the top of the upper panel is aligned with the top of the adjacent cabinetry. The final panel/cabinetry alignment is achieved by adjusting the feet: WIDTH OF ALL PANELS Measure A (the width - Fisher and Paykel DD24DCHTX6 | Installation Instructions - Page 9
7b TALL HEIGHT INTEGRATED MODELS ONLY - CUSTOM PANEL CALCULATIONS 9 The following calculations assume the top of the upper panel is aligned with the top of the adjacent cabinetry. The final panel/cabinetry alignment is achieved by adjusting the feet: WIDTH OF ALL PANELS Measure A (the width - Fisher and Paykel DD24DCHTX6 | Installation Instructions - Page 10
hole Can be located either side of dishwasher, preferably at the bottom of the cavity, as shown. If adequate clearance, services hole can be made higher to clear toekick space. If hole is higher, ensure drain hose(s) are routed straight into the waste connection. - If the - Fisher and Paykel DD24DCHTX6 | Installation Instructions - Page 11
9 MAXIMUM DISTANCE OF HOSES & CORD FROM CHASSIS EDGE 11 Left hand side Drain hoses - 78 ½" (2000 mm) Inlet hose - 64 ¾" (1650 mm) Power cord (excl. plug) - 29 ½" (750 mm) Right hand side Drain hoses - 70 ½" (1800 mm) Inlet hose - 49 " (1250 mm) Power cord (excl. plug) - 27 ½" (700 mm) - Fisher and Paykel DD24DCHTX6 | Installation Instructions - Page 12
12 NOW CHOOSE WHICH INSTALLATION METHOD (a) or (b) IS MORE SUITABLE FOR YOUR CABINETRY... RECOMMENDED METHOD (a) - SECURE WITHOUT DRAWER REMOVAL (FRAMELESS CABINETRY ONLY) 10a ATTACH SIDE MOUNTING BRACKETS Clip all four side mounting brackets into their slots using a flat-bladed screwdriver. B - Fisher and Paykel DD24DCHTX6 | Installation Instructions - Page 13
12a SECURE TO THE CABINETRY ON THE SIDES Open the drawer halfway. Using a flat-bladed screwdriver, prize the gray rubber plug out of the trim moulding. 2 Using a small Philips screwdriver, screw through the trim moulding, securing the side mounting bracket to the cabinetry. Do not damage the rubber - Fisher and Paykel DD24DCHTX6 | Installation Instructions - Page 14
14 - Fisher and Paykel DD24DCHTX6 | Installation Instructions - Page 15
15 ALTERNATIVE METHOD (b) - SECURE BY DRAWER REMOVAL 10b PULL THROUGH HOSES & PUSH INTO THE CAVITY optionally attach the (x2) two top mounting brackets You can initially level the product 11b REMOVE THE LOWER DRAWER To prevent kinked hoses, we recommend rotating the drawer counter-clockwise and - Fisher and Paykel DD24DCHTX6 | Installation Instructions - Page 16
12b SECURE TO THE CABINETRY ON THE SIDES For further adjustment, using the most appropriate length Hexagonal socket supplied, fully extend leveling feet up to required distance by hand. To access the side brackets, you might have to push aside the insulation. After securing, ensure the sound - Fisher and Paykel DD24DCHTX6 | Installation Instructions - Page 17
15b FIT THE SUPPLIED TOEKICK PANEL (OPTIONAL FOR INTEGRATED MODELS) Where the toekick 1 meets the bottom of the tub is the 3 cut-off point Lay the toekick face down on a chopping board or similiar 4 2 Mark this point on the toekick with a pencil 19 Score along with a knife 5 19 Turn the - Fisher and Paykel DD24DCHTX6 | Installation Instructions - Page 18
INTEGRATED MODELS ONLY - INSTALLING THE FRONT PANELS 18 16 REMOVE BRACKETS FROM PRODUCT WARNING! Electrical Shock Hazard Before continuing, ensure that the product is disconnected from the power supply. Failure to follow this warning may result in electrical shock, injury or fire. 1 17 ATTACH - Fisher and Paykel DD24DCHTX6 | Installation Instructions - Page 19
INTEGRATED MODELS ONLY - INSTALLING THE FRONT PANELS 19 20 ADJUST PANEL HEIGHT TO ALIGN THE CABINETRY GAPS 21 FITTING A CUSTOM TOEKICK PANEL 15⁄86"m(1m6mxm5) x5 + or - 1⁄16" (2 mm) With the front panels fitted, insert an appropriately sized Philips screwdriver into the hole above the door pin - Fisher and Paykel DD24DCHTX6 | Installation Instructions - Page 20
Air Break with Drain Hose Joiner Dishwasher using sink trap with drain hose joiner If space is limited for fixing, push hose through drain hose support to required height 2 2 Supplied drain hose joiner Ø ¾" (19 mm) waste tee If space is limited for fixing, push hose through drain hose - Fisher and Paykel DD24DCHTX6 | Installation Instructions - Page 21
drain hose joiner must not support the weight of excess hose in the User guide for further information and instructions. No program indicator problem occurs, consult the 'Troubleshooting' section of the User guide. If after checking these points you still need assistance, please refer to the Service - Fisher and Paykel DD24DCHTX6 | Installation Instructions - Page 22
US CA
590204D
04.13
INSTALLATION INSTRUCTIONS
DishDrawer
TM
dishwasher
DD24D 7 & DD24DT 7 models