Fisher and Paykel OB24SDPTDX2 Installation Guide Wall Oven
Fisher and Paykel OB24SDPTDX2 Manual
 |
View all Fisher and Paykel OB24SDPTDX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Fisher and Paykel OB24SDPTDX2 manual content summary:
- Fisher and Paykel OB24SDPTDX2 | Installation Guide Wall Oven - Page 1
BUILT-IN OVEN OB24SDPT models INSTALLATION GUIDE US CA 591944B 09.22 - Fisher and Paykel OB24SDPTDX2 | Installation Guide Wall Oven - Page 2
supply cable is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard. z A in accordance with local codes. IMPORTANT! SAVE THESE INSTRUCTIONS The models shown in this installation guide may not be available in all markets and - Fisher and Paykel OB24SDPTDX2 | Installation Guide Wall Oven - Page 3
the oven is not sealed into the cabinetry with silicone or glue. This makes future servicing difficult. Fisher & Paykel will not cover the costs of removing the oven, or nearest Fisher & Paykel trained and supported service technician, Customer Care, or contact us through our website fisherpaykel. - Fisher and Paykel OB24SDPTDX2 | Installation Guide Wall Oven - Page 4
PRODUCT DIMENSIONS b a d g 4 FRONT e PLAN PROFILE h fc PRODUCT DIMENSIONS A Overall height of oven B Overall width of oven C Overall depth of oven (excluding handle and dials) D Height of chassis E Width of chassis F Depth of chassis G Depth of oven frame and control panel (distance between - Fisher and Paykel OB24SDPTDX2 | Installation Guide Wall Oven - Page 5
5/8 600 22 13/16 580 23 5/8 600 21 5/8 550 If installing a cooktop above the oven, ensure adequate clearance is provided as per the cooktop manufacturer's instructions. PROUD INSTALL 5/8 - 13/16" (16-20mm) FLUSH INSTALL 5/8 - 13/16" (16-20mm) min. 1/16" (2mm) 5 - Fisher and Paykel OB24SDPTDX2 | Installation Guide Wall Oven - Page 6
DISCARD PACKAGING RESPONSIBLY Remove the accessories box from the top of the oven and set aside. Recycle responsibly. 6 - Fisher and Paykel OB24SDPTDX2 | Installation Guide Wall Oven - Page 7
CONNECT THE OVEN TO THE MAINS SUPPLY Nameplate location Junction box locations OB24SDPT MODELS VOLTAGE MAX. CURRENT DRAW 208 V 16.6 A 240 V 19.4 A MAX LOAD 3.5 kW 4.6 kW Connection methods a box red wires white and green grounding oven wires - factory taped cable from power supply - Fisher and Paykel OB24SDPTDX2 | Installation Guide Wall Oven - Page 8
by the door handle. z Do not over-tighten the screws. z Do not seal the oven into the cabinetry with silicone or glue. This makes future servicing difficult. Fisher & Paykel will not cover the costs of removing the oven, or of damage caused by this removal. 1 Position the oven in the prepared - Fisher and Paykel OB24SDPTDX2 | Installation Guide Wall Oven - Page 9
opens fully without obstruction. TEST OPERATION: Turn the power to the oven on. The display should light up. Set the clock following the instructions in the 'User guide'. Set the oven to Bake at 50oC. The light should come on inside the oven cavity and air should blow out of the vent - Fisher and Paykel OB24SDPTDX2 | Installation Guide Wall Oven - Page 10
may not be available in all markets and are subject to change at any time. The product specifications in this guide apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
OB24SDPT models
BUILT-IN OVEN
INSTALLATION GUIDE
US CA
591944B
09.22