Fisher and Paykel OR36SCI6X1 Installation Guide / Guide dinstallation
Fisher and Paykel OR36SCI6X1 Manual
 |
View all Fisher and Paykel OR36SCI6X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Fisher and Paykel OR36SCI6X1 manual content summary:
- Fisher and Paykel OR36SCI6X1 | Installation Guide / Guide dinstallation - Page 1
FREESTANDING COOKER OR36SDI6 & OR36SCI6 Induction models INSTALLATION GUIDE US CA - Fisher and Paykel OR36SCI6X1 | Installation Guide / Guide dinstallation - Page 2
CONTENTS Safety and warnings 3 Parts supplied for installation 5 Tools needed for installation (not supplied with the appliance) 5 Model identification 6 Prior to installation 6 Product dimensions 7 Clearance dimensions 8 Fitting the optional backguard 9 Location of electrical - Fisher and Paykel OR36SCI6X1 | Installation Guide / Guide dinstallation - Page 3
! Cut Hazard Failure to use caution could result in injury. • Take care: some edges are sharp. ! WARNING! Tip-Over Hazard Failure to follow these instructions can result in death or serious burns to children and adults. A child or adult can tip the range and be killed. • Install anti-tip device - Fisher and Paykel OR36SCI6X1 | Installation Guide / Guide dinstallation - Page 4
parts may be used in performing service on the range. Replacement parts are available from factory authorized parts distributors. Contact the nearest parts distributor in your area. IMPORTANT! SAVE THESE INSTRUCTIONS The models shown in this installation guide may not be available in all - Fisher and Paykel OR36SCI6X1 | Installation Guide / Guide dinstallation - Page 5
APPLIANCE MUST BE INSTALLED BY A QUALIFIED INSTALLER. z Improper installation, adjustment, alteration, services, or maintenance can cause injury or property damage. Consult a qualified installer or the service agent. z The use of suitable protective clothing/gloves is recommended when handling or - Fisher and Paykel OR36SCI6X1 | Installation Guide / Guide dinstallation - Page 6
Model features may vary 36" Induction models OR36SDI6 OR36SCI6 MODEL IDENTIFICATION PRIOR TO INSTALLATION Unpacking and handling z Inspect the range to verify that there is no shipping damage. If any damage is detected, call the shipper and initiate a damage claim. Fisher & Paykel is not - Fisher and Paykel OR36SCI6X1 | Installation Guide / Guide dinstallation - Page 7
PRODUCT DIMENSIONS Model features may vary. Optional kickstrip shown is available (purchased separately). C D A E F FRONT G PROFILE B C PLAN PRODUCT DIMENSIONS A Overall height of range (from floor to top of cooktop, excl. optional backguard) B Overall width of range C Overall depth of range - Fisher and Paykel OR36SCI6X1 | Installation Guide / Guide dinstallation - Page 8
d C bA b Cooking surface e Electrical (see diagrams following) d FRONT CLEARANCE DIMENSIONS E H ISO CLEARANCE DIMENSIONS A Minimum width of ventilation hood installed above range B Minimum vertical distance between countertop and cabinet extending above counter C Minimum clearance from left - Fisher and Paykel OR36SCI6X1 | Installation Guide / Guide dinstallation - Page 9
Island trim and backguard z It is mandatory to install and use the range with either the island trim or the optional backguard correctly in place. z The island trim is already fitted to the range while the backguard can be purchased as a separate kit. z If replacing the island trim with the - Fisher and Paykel OR36SCI6X1 | Installation Guide / Guide dinstallation - Page 10
VENTILATION REQUIREMENTS A suitable ventilation hood may be installed above the range. Fisher & Paykel has a choice of ventilation hoods designed to match the rest of our kitchen appliance family. See fisherpaykel.com or your local dealer for more details. IMPORTANT z Consult local building codes - Fisher and Paykel OR36SCI6X1 | Installation Guide / Guide dinstallation - Page 11
fitting of the feet. IMPORTANT Take care not to damage the range during this operation. Fit the four legs by screwing them tight into the support base as shown. 1 Tip range onto its back and fix 2 Gently bend the sides of the inner brackets to mounting holes. 1 Tip range onto its back - Fisher and Paykel OR36SCI6X1 | Installation Guide / Guide dinstallation - Page 12
FITTING THE ADJUSTABLE FEET Fitting the adjustable (rear) feet covers (optional) If installing rear feet covers use the following instructions to attach the mounting brackets to the base of the range. Washers A BC 1 Remove screws A, B and C from the plate on the base of the range. C 2 - Fisher and Paykel OR36SCI6X1 | Installation Guide / Guide dinstallation - Page 13
INSTALLING THE ANTI-TIP BRACKET The anti-tip bracket has two components: z the adjustable bracket z the stability bracket IMPORTANT! You must install both parts of the anti-tip bracket and ensure they are properly fitted together to prevent the range from tipping. Fit the anti-tip bracket 1 2 3 - Fisher and Paykel OR36SCI6X1 | Installation Guide / Guide dinstallation - Page 14
INSTALLING THE ANTI-TIP BRACKET IMPORTANT! z Use the proper screws to fix the stability bracket in place according to the type of material on the floor and/or wall. z Before drilling and holes or inserting any screws into the floor or wall check that you will not damage any wiring or pipes. 3 Fix - Fisher and Paykel OR36SCI6X1 | Installation Guide / Guide dinstallation - Page 15
! Electrical Shock Hazard Failure to follow these instructions can result in death, fire, or electrical shock. Electrically ground range. WARNING! VERY IMPORTANT To avoid electrical shock hazard, before installing the appliance, switch power OFF at the service panel and lock the panel to prevent - Fisher and Paykel OR36SCI6X1 | Installation Guide / Guide dinstallation - Page 16
PERMANENT CONNECTION (HARD WIRING) US only, for Canada it is mandatory to connect the range by using cordset with plug supplied. Units may be hard wired to the power supply. The installer must provide approved flexible aluminium conduit, 3/4" (19mm) trade size, maximum 6ft (1.8m) long. Locate the - Fisher and Paykel OR36SCI6X1 | Installation Guide / Guide dinstallation - Page 17
TO BE COMPLETED BY THE INSTALLER GENERAL F Placement of unit. F Specified clearance maintained to cabinet surfaces. F Unit Level - front to back, side to side. F All packaging material and tie straps removed. F Island trim or optional backguard correctly attached. F The anti-tip bracket is correctly - Fisher and Paykel OR36SCI6X1 | Installation Guide / Guide dinstallation - Page 18
may not be available in all markets and are subject to change at any time. The product specifications in this guide apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
 |
 |
OR36SDI6 & OR36SCI6
Induction models
FREESTANDING COOKER
INSTALLATION GUIDE
US CA