Fluke 123 Fluke 123 and 124 Scopemeter Datasheet

Ordering information

FLUKE-123/003

Industrial ScopeMeter

20 MHz

FLUKE-123/003S


20 MHz with SCC Kit

FLUKE-124/003


40 MHz

FLUKE-124/003S


40 MHz with SCC Kit

Fluke 120 Series Industrial

ScopeMeter

®

Test Tools

Three-in-one simplicity for

fast answers wherever you work.

A three-in-one tool

ScopeMeter 120 Series combines a

40 MHz or 20 MHz dual input digital

storage oscilloscope, two true-rms

digital multimeters and a dual input

TrendPlot

™

recorder all in a compact,

battery powered instrument. Leave all

other test tools behind because the

ScopeMeter 120 Series test tool is the

only one you’ll need.

Dual-input meas-

urement shows

both meter read-

ing and waveform

at the same time

(124, incl. cursors)

Connect-and-View

™

triggering

for an instant, stable display

Scope users know how difficult triggering

can be. Incorrect settings show unstable

and sometimes incorrect results. Fluke’s

unique Connect-and-View recognizes

signal patterns, and automatically sets

up correct triggering. It provides a sta-

ble, reliable and repeatable display of

virtually any signal including motordrive

and control signals – without touching

a button. Signal changes are instantly

recognized and settings adjusted for

once again a stable display.

The compact ScopeMeter 120 Series is the rugged

solution for industrial troubleshooting and installation

applications. These are truly integrated test tools, with

oscilloscope, multimeter and “paperless” recorder in one

affordable, easy-to-use instrument. Find fast answers to

problems in machinery, instrumentation, control and

power systems.

•

A dual input 40 MHz or 20 MHz digital oscilloscope

•

Two 5,000-count true-rms digital multimeters

•

Cursor measurements (Fluke 124 only)

•

A dual input TrendPlot recorder

•

Connect-and-View trigger simplicity for hands-off

operation

•

Shielded test leads for oscilloscope, resistance,

continuity and capacitance measurements

•

Full bandwidth, heavy duty 10:1 probe included

standard with Fluke 124

•

Up to five hours battery operation with standard

battery, seven hours with optional battery

(Included with Fluke 124)

•

600 V CAT III safety certified

•

Optically isolated RS-232 interface

•

Rugged, compact case

Other factors, like line outages and

sags, or the starting and stopping of a

motor can also cause a machine to

stop. You may not be around to see it

— your Fluke ScopeMeter will. In this

“paperless recorder” mode, you can

plot the min, max, peak and average

values over time, up to 16 days. The

two inputs can plot any combination

of volts, amps, temperature, frequency

and phase, with time and date stamp-

to help lead you to the cause of those

faults quickly.

Battery powered mobility

Up to seven hours of battery operation

frees you from mains outlets for true

on-the-move working. The handheld

format and the weight of just 1.2 kg,

make the instrument easy to carry and

to fit comfortably in your hand. The

rugged, drip proof case assures long

life and reliable operation in the

harshest industrial environments.

Safety certified

The ScopeMeter 120 Series Test Tools

and the included shielded test leads

are safety certified for measurements

on 600 V CAT III industrial power

systems. Via the optically isolated

RS-232 interface, the ScopeMeter 120

can be safely connected to a printer

for direct print-out or to a PC for later

analysis and documentation using

FlukeView software. And using the

VPS40 probe, measurement up to

1000 V CAT II are fully supported!

Connect-and-View

captures even the

most complex

motor drive signals

One test lead measures all

High-frequency waveform, meter,

capacitance and resistance measure-

ments and continuity checks are all

covered by the shielded test leads. No

time wasted finding or swapping leads.

The included accessories allow hook-up

at test objects of every dimension.

Check the

starting

capacitor of a

motor with the

ScopeMeter 124

Use TrendPlot

™

to help find

intermittents, fast

The toughest faults to find are those

that happen only once in a while –

intermittents. They can be caused by

bad connections, dust, dirt, corrosion or

simply broken wiring or connectors.

E

l

e

c

t

r

i

c

a

l

S

a

f

e

t

y

600 V±

CAT III

For more information, go to www.MyFlukeStore.com

33

Verifying CAN bus signals with a

Fluke ScopeMeter

®

120 Series

Application Note

(Literature code 2126072)

Verifying the physical layer signals

of two-wire differential serial bus

system. Read

a detailed

application

note on www.

fluke.com/

scopemeter.

Fluke 123 Fluke 123 and 124 Scopemeter Datasheet

Fluke 123 Manual

Fluke 123 manual content summary: