Foxconn G31MX-K 2.0 English Manual. - Page 31

3 Standard CMOS Features This submenu is used to set up the standard BIOS features, such as the date, time, floppy drive and so on. Use the arrow up/down keys to select an item, then use the or keys to change the setting. Phoenix - AwardBIOS CMOS Setup Utility Standard CMOS Features Date (mm:dd:yy) Thu, Jan 10 2008 Item Help Time (hh:mm:ss) 17 : 44 : 13 Menu Level ► ► IDE Channel 0 Master [HDS728080PLAT20] Press [Enter] to enter ► IDE Channel 0 Slave [DVD-ROM DDU1642] next page for detail x IDE Channel 1 Master None hard drive settings x IDE Channel 1 Slave None ► IDE Channel 2 Master [ None] ► IDE Channel 2 Slave [ None] ► IDE Channel 3 Master [ None] ► IDE Channel 3 Slave [ None] Drive A [1.44M, 3.5 in.] Halt On [All , But Keyboard] Installed Memory 1024M BIOS ID G31M04-GA20.F1.P.04 Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F7: Optimized Defaults ► Date - format Day-weekday from Sun. to Sat., automatically displayed by BIOS (Read Only). Month-month from 1 to 12. Date-date from 1st to 31st. Year-year, set up by users. Use , keys to select a field. Use , , or to select a value. ► Time - : : format This item allows you to configure the desired time. Use , to move forward and select a field. Directly input a value or use , , or to select a value. ► IDE Channel 0/1/2/3 These categories identify the hard disks connected to the PATA and SATA ports in the system. In each channel's display, you can press [Enter] to go to its submenu. You can further configure specific drive settings. [None] and [Auto] settings allow you to enable or disable this drive. [None] means no HDD is installed or set, and [Auto] means the system can auto-detect the hard disk when booting up. In Access Mode setting, selections of [CHS], [LBA], [Large] and [Auto] can help you to select hard drive for legacy compatibility. 24