Foxconn G31MX-K 2.0 English Manual. - Page 45

3 USB Device Setting Phoenix - AwardBIOS CMOS Setup Utility USB Device Setting USB Controller [Enabled] Item Help USB 2.0 Controller [Enabled] USB Operation Mode [High Speed] Menu Level ► USB Keyboard Function [Enabled] USB Mouse Function [Enabled] [Enable] or [Disable] Universal Host Controller Interface *** USB Mass Storage Device *** for Universal Serial Bus Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F7: Optimized Defaults ► USB Controller This item is used to enable or disable the Universal Host Controller Interface for USB. ► USB 2.0 Controller This item is used to enable or disable the Enhanced Host Controller Interface for USB. ► USB Operation Mode This item is used to set the USB operation mode. If you select the [High Speed], then the USB operation mode is determined by the USB device; select [Full/Low Speed], the USB device operates on full/low speed. ► USB Keyboard Function This item is used to enable the support for USB keyboard on legacy OS. If you have a USB keyboard, set to auto or enabled. ► USB Mouse Function This item is used to enable the support for USB mouse on legacy OS. If you have a USB mouse, set to auto or enabled. ► ***USB Mass Storage Device*** BIOS auto detects the presence of USB Mass Storage Devices, you can configure the Boot setting mode for the detected USB MSD. Setting Options: [Auto]; [FDD Mode]; [HDD Mode]. 38