Foxconn G31MX-K 2.0 English Manual. - Page 50
PC Health Status
View all Foxconn G31MX-K 2.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
PC Health Status Phoenix - AwardBIOS CMOS Setup Utility PC Health Status Case Open Warning [Disabled] Item Help Shutdown Temperature [Disabled] Warning Temperature [Disabled] Menu Level ► Vccp 1.32 Vddr 1.77 V +3.3V 3.34 V +12V 11.84 V +5V 4.75 V Voltage Battery CPU Temperature System Temperature 3.02 V 29oC 30oC System Fan Speed 0 RPM CPU Fan Speed 2039 RPM Smart Fan Control x PWM Start Temp (oC) [Disabled] 35 x Start PWM Value (0~127) 64 x Slope PWM Value 2 x Delta Temp (oC) 3 Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F7: Optimized Defaults 3 ► Case Open Warning This item is used to enable or disable case open warning function. ► Shutdown Temperature This item is used to set the system temperature upper limit. When the temperature exceeds the set value, the system will shut down automatically. ► Warning Temperature This option is used to set the warning temperature for the system. When the temperature of CPU is higher than the set value, the motherboard will send out warning information. ► Vccp/Vddr/+ 3.3V/+12V/+5V/Voltage Battery The current voltages are automatically detected and displayed by the system. ► CPU/System Temperature The CPU/System temperature are automatically detected and displayed by the system. ► System Fan/CPU Fan Speed The System fan/CPU fan speed are automatically detected and displayed by the system. ► Smart Fan Control This option is used to enable or disable smart fan function. Only when this option is enabled, you can set some correlative parameters. ► PWM Start Temp(oC) It allows you set a temperature value from which smart fan starts its operation. ► Start PWM Value It allows you to set an initial PWM value to drive the fan when the temperature reaches "PWM Start Temp" value and smart fan begins its operation. ► Slope PWM Value It is used to set the slope in PWM/Temperature diagram. The slope controls the PWM value being stepped up or down versus temperature changes. ► Delta Temp(oC) It is used to set the delta value for temperature. When change of the temperature reaches plus/minus delta value, then the PWM will be increased or decreased by a step value based 43