Foxconn G31MXP English Manual.

Foxconn G31MXP Manual

Get Foxconn G31MXP PDF manuals and user guides View all Foxconn G31MXP manuals
Add to My Manuals
Save this manual to your list of manuals

Foxconn G31MXP manual content summary:

  • Foxconn G31MXP | English Manual. - Page 1
    G31MXP Series Motherboard User's Manual
  • Foxconn G31MXP | English Manual. - Page 2
    property of their respective owners. Version: User's Manual V1.0 for G31MXP Series motherboard. Symbol description: ! Caution : refers to important information that can help you to use motherboard better, and tells you how to avoid problems. WARNING! Warning : indicating a potential risk of hardware
  • Foxconn G31MXP | English Manual. - Page 3
    HON HAI PRECISION INDUSTRY COMPANY LTD 66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT, TAIPEI HSIEN, TAIWAN, R.O.C. declares that the product Motherboard G31MXP/G31MXP-K is in conformity with (reference to the specification under which conformity is declared in accordance with 89/336 EEC-EMC
  • Foxconn G31MXP | English Manual. - Page 4
    Party: Address: Telephone: Facsimile: FOXCONN G31MXP/G31MXP-K PCE Industry Inc. 458 E. Lambert Rd. Fullerton, CA 92835 714-738-8868 714-738-8838 Equipment Classification: Type of Product: Manufacturer: Address: FCC Class B Subassembly Motherboard HON HAI PRECISION INDUSTRY COMPANY LTD
  • Foxconn G31MXP | English Manual. - Page 5
    system can operate normally when your CPU/Memory is overclocked. Normal operation depends on the overclocking capacity of your device. ■ If there is any, when connecting USB, audio, 1394a, RS232 COM, IrDA or S/PDIF cables to the internal connectors on the motherboard, make sure their pinouts are
  • Foxconn G31MXP | English Manual. - Page 6
    CPU and CPU Cooler 8 Install the Memory 11 Install an Expansion Card 13 Install other Internal Connectors 14 Jumpers 18 Chapter 3 BIOS Setup Enter BIOS Setup Without Saving 46 Chapter 4 CD Instruction ......U.ti.li.ty.C..D..co.n.t.e.n.t 48 Install driver and utility 49 FOX ONE Main Page 51
  • Foxconn G31MXP | English Manual. - Page 7
    Online Update 64 Configure 67 About & Help 69 FOX LOGO 70 FOX DMI 71 Technical Support : Website : http://www.foxconnchannel.com Support Support Website : http://www.foxconnsupport.com Worldwide online contact Support : http://www.foxconnsupport.com/inquiry.aspx CPU Support List : http
  • Foxconn G31MXP | English Manual. - Page 8
    Thank you for buying Foxconn G31MXP Series motherboard. Foxconn products are engineered to maximize computing power, providing only what you need for break-through performance. With advanced overclocking capability and a range of connectivity features for today multi-media computing requirements,
  • Foxconn G31MXP | English Manual. - Page 9
    Supports 45nm processors Front Side Bus 1600(oc*)/1333/1066/800MHz FSB (oc* : Overclocking) Chipset North Bridge : Intel® G31 Chipset South Bridge : Intel® ICH7 Memory 2 x 240-pin DDR2 DIMM sockets Support up to 4GB of system memory Dual channel DDR2 800/667MHz architecture Audio
  • Foxconn G31MXP | English Manual. - Page 10
    Support ACPI (Advanced Configuration and Power Interface) Support S0 (normal), S1 (power on suspend), S3 (suspend to RAM), S4 (suspend to disk), and S5 (soft - off) Bundled Software FOX ONE FOX LiveUpdate FOX LOGO FOX DMI Operating System Support for Microsoft® Windows® Vista/XP
  • Foxconn G31MXP | English Manual. - Page 11
    x1 Slot 6. PCI Express x16 Slot 7. PCI Slots 8. Front Audio Connector 9. Floppy Connector 10. S/PDIF_OUT Connector 11. SYS_FAN Header 12 DDR2 DIMM Slots 24. CPU_FAN Header 25. North Bridge: Intel® G31 chipset 26. LGA 775 CPU Socket 27. Over Memory Fequency JumperJP1, JP2 Note : The above motherboard
  • Foxconn G31MXP | English Manual. - Page 12
    as monitor or LCD display. 6. USB Ports The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices such as an USB keyboard/mouse, USB printer, USB flash drive and etc. 7. Audio Ports For the definition of each audio port, please refer to the table below : Port Blue Green
  • Foxconn G31MXP | English Manual. - Page 13
    connection at up to 10/100/1000Mb/s data rate. LAN Type 100M 1000M Left: Active Status Description Off No Link /s Connection No Link 10Mb/s Connection 100Mb/s Connection 1000Mb/s Connection ! G31MXP supports 10/100Mb/s Ethernet. G31MXP-K supports 1Gb/s Ethernet. Active Link LED LED 
  • Foxconn G31MXP | English Manual. - Page 14
    ■ Jumpers This motherboard supports CPUs with a power rating no more than 105W, which include Intel® CoreTM 2 Quad, CoreTM 2 Duo, Pentium® Dual-Core, Celeron® Dual-Core, Celeron® and 45nm CPUs. For further information, please refer to website http://www.foxconnchannel.com for CPU Support List. We
  • Foxconn G31MXP | English Manual. - Page 15
    Intel® CPU that supports HT Technology ■ A chipset that supports HT Technology ■ An operating system that is optimized for HT Technology ■ A BIOS that supports HT Technology and has it enabled Install the CPU Locate the alignment keys on the motherboard CPU socket and the notches on the CPU. LGA775
  • Foxconn G31MXP | English Manual. - Page 16
    metal cover on the CPU socket. 4. Check pin one marking (triangle) with the pin one corner of the CPU socket, align the CPU notches with the socket alignment keys and gently put the CPU onto the socket. 5. When CPU is properly seated, replace the metal cover and push the CPU socket lever back to
  • Foxconn G31MXP | English Manual. - Page 17
    to correctly install the CPU cooler on the motherboard. (The following procedures use Foxconn cooler as the example.) 2 CAUTION 1. Apply and spread an even thermal grease on the surface of CPU. 2. Place the four bolts of the CPU cooler to the holes of the motherboard, push them straight down
  • Foxconn G31MXP | English Manual. - Page 18
    , switch the direction. Dual Channel Memory Configuration This motherboard provides two DDR2 memory sockets and supports Dual Channel Technology. When memory is installed, the BIOS will automatically check the memory in your system. Two DDR2 memory sockets are divided into two channels : Channel
  • Foxconn G31MXP | English Manual. - Page 19
    to prevent damage to the memory module. Be sure to install DDR2 DIMMs on this motherboard. Notch If you take a look at front side of memory memory modules into the sockets. Step 1: Spread the clips at both ends of the memory socket. Place the memory module onto the socket, then put your fingers
  • Foxconn G31MXP | English Manual. - Page 20
    your expansion card in the expansion slot. 1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis back panel. If necessary, go to BIOS Setup to make any required BIOS changes for your expansion card(s). 7. Install the driver provided with the expansion
  • Foxconn G31MXP | English Manual. - Page 21
    sure that the power supply cable and pins are properly aligned with the connector on the motherboard. Firmly plug the power supply cable into the connector and make sure it is secure. PWR2 and provides power to the CPU. 3 1 +12V GND 4 2 PWR2 Pin # 1 2 3 4 Definition GND GND +12V +12V 14
  • Foxconn G31MXP | English Manual. - Page 22
    : F_AUDIO The audio connector supports HD Audio standard. It provides the Front Audio output choice. PORT1_L PORT1_R PORT2_R SENSE_SEND PORT2_L 12 9 10 AUD_GND PRESENCEJ SENSE1_RETURN EMPTY SENSE2_RETURN F_AUDIO Floppy Disk Drive Connectors : FLOPPY This motherboard includes a standard
  • Foxconn G31MXP | English Manual. - Page 23
    connector is used to connect with SATA Hard Disk or CD devices which supporting this feature. The current Serial ATA II interface allows up to 300MB/s main fan headers on this motherboard. The fan speed can be controlled and monitored in "PC Health Status" section of the BIOS Setup. These fans can be
  • Foxconn G31MXP | English Manual. - Page 24
    2 Chassis Intrusion Alarm Header : INTR The connector can be connected to a security switch on the chassis. The system can detect the chassis intrusion through the function of this connector. If eventually the chassis was closed, the system will send a message out. TPM Connector : TPM The TPM (
  • Foxconn G31MXP | English Manual. - Page 25
    motherboard, Pin 1 can be identified by the bold silkscreen next to it. However, in this manual It can prevent hazardous ESD (Electrical Static Discharge) problem. Jumper 1 1 Diagram 1 1 1 1 CLR_CMOS The motherboard uses CMOS RAM to store the basic hardware information (such as BIOS data, date
  • Foxconn G31MXP | English Manual. - Page 26
    from S3 and S4 sleep modes using the connected USB devices. At the same time, a corresponding setting must be set in BIOS as below: Set "CMOS Setup" -> "Power Management Setup" -> "USB Wake Up From S3" to "Enabled". 1 +5V 2 (Default) 3 1 +5VSB 2 3 USBPW1357_1/ USBPW0246_1 ! ■ USBPW1357_1
  • Foxconn G31MXP | English Manual. - Page 27
    2 Over Memory Frequency Jumper: JP1, JP2 When you use the memory which support 1066, the jumpers are used to overclock memory frequency. At the same time, the overclock bound depend on CPU FSB, you can achieve the function as below. 1. When the CPU FSB is 1066MHz, set the JP1 pins to 2-3 (as Status
  • Foxconn G31MXP | English Manual. - Page 28
    Setup ■ PC Health Status ■ Load Optimized Defaults ■ Set Supervisor Password ■ Set User Password ■ Save & Exit Setup ■ Exit Without Saving Since BIOS could be updated some other times, the BIOS information described in this manual is for reference only. We do not guarantee the content of this
  • Foxconn G31MXP | English Manual. - Page 29
    you made. Main Menu The main menu allows you to select from a list of setup functions together with two exit choices. Use the arrow keys to Unit Some special proprietary features (such as overclocking) can be set up through this menu. ► Advanced BIOS Features The advanced system features can be set
  • Foxconn G31MXP | English Manual. - Page 30
    temperatures and voltages of your CPU/System. ► Load Optimized Defaults less memory ...etc.), still, it may cause problem if you have more memory or I/O cards What you need now is to adjust BIOS setting one by one, trial and talk about and keys in this manual, they are the single-keypad keys of
  • Foxconn G31MXP | English Manual. - Page 31
    Master [ None] ►IDE Channel 3 Slave [ None] Drive A [1.44M, 3.5 in.] Halt On [All , But Keyboard] Model Name : G31MXP/G31MXP-K BIOS Version : P01 Memory : 2048MB MAC Address : 00-01-6C-20-F4-90 Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz Move Enter:Select +/-/PU/PD
  • Foxconn G31MXP | English Manual. - Page 32
    disk error, but it will stop for all other errors. ► Model Name This item shows the model name. ► BIOS Version This item shows the BIOS version. ► CPU Name This item shows the CPU name installed in you system. ► Memory This item shows the information of the system memory, determined by POST(Power
  • Foxconn G31MXP | English Manual. - Page 33
    DRAM Configuration Super BIOS Protect Auto Detect PCI CPU Configuration/ DRAM Configuration Press to go to its submenu. ► Super BIOS Protect To protect the system BIOS from virus attack, there is a BIOS write-protection mechanism provided. Super BIOS Protect function protects your BIOS
  • Foxconn G31MXP | English Manual. - Page 34
    BIOS Smart Power LED S��m��a�rt��B�o�o�t�M��e�n�u� Current CPU Speed Current FSB Speed Current CPU LED is a feature built on your motherboard to indicate different states during Power On Condition Always On Reboot & Memory OK Reboot & Display OK Enter Setup or Skip Reboot & Fan OK
  • Foxconn G31MXP | English Manual. - Page 35
    ► FSB 1600 CPU Support ( Appears only if CPU supports FSB 1600) This item will show and provide more options if your CPU is supporting FSB1600. If it [Step 1]. [Manual] - It means you can manually select a CPU clock to run your system. Any selected setting must be saved and exit BIOS to activate it.
  • Foxconn G31MXP | English Manual. - Page 36
    Multiplier Adjust This option is used to adjust the CPU Clock Ratio. Multiply CPU clock with this ratio, you can get the CPU speed. Increase this ratio may overclock your CPU. This option will be displayed only if your CPU is supporting this feature. Voltage Options Phoenix - AwardBIOS CMOS Setup
  • Foxconn G31MXP | English Manual. - Page 37
    to dynamically adjust processor voltage and core frequency, which can result in decreased average power consumption and decreased average heat production. There are some system requirements must be met, including CPU, chipset, motherboard, BIOS and operation system. Please refer to Intel Website for
  • Foxconn G31MXP | English Manual. - Page 38
    a small EEPROM chip, mounted on a DDR2 memory module. It contains important information about the module's speed, size, addressing mode and various other parameters, so that the motherboard memory controller (chipset) can better access the memory device. Select [Manual], then you can configure the
  • Foxconn G31MXP | English Manual. - Page 39
    will always turn on APIC Mode. This option will be displayed only if your CPU is supporting this feature. ► First/Second/Third Boot Device These three options allow you to Up Floppy Seek This item controls whether the BIOS will be checking for a floppy drive while booting up. If it cannot detect one
  • Foxconn G31MXP | English Manual. - Page 40
    3 is set to "System", a password is required not only to enter CMOS Setup, but also to start up your PC. ►Delay For HDD (Seconds) This item allows you to select the delay for detecting ATA/ATAPI devices while booting. Time out value: 0~15s. ► Full Screen Logo Show This item allows you to enable or
  • Foxconn G31MXP | English Manual. - Page 41
    the system BIOS will pre-allocate the amount selected (8MB) from the top of the main system memory, which will be dedicated for VGA/SVGA graphics. The VGA graphics memory is needed for applications run from a Microsoft MS-DOS or legacy operating system, where there is no Intel Graphics Driver loaded
  • Foxconn G31MXP | English Manual. - Page 42
    3 DVMT is an enhancement of the UMA concept, where in the graphics driver allocates memory as needed for running graphics applications. If a user is not performing any graphics-intensive operations, most of the DVMT memory can be utilized
  • Foxconn G31MXP | English Manual. - Page 43
    DMA mode will be detected at boot-up. If the drive does not support DMA transfers, then it will use PIO mode instead. Recommend leaving this BIOS feature at the default [Enabled] setting. You should only disable it for troubleshooting purposes. For example, certain IDE devices may not run properly
  • Foxconn G31MXP | English Manual. - Page 44
    when the PCI bus is overclocked. Disabling DMA support will force the drive to use the slower PIO transfer mode. This may allow the drive to work properly with the higher PCI bus speed. ► On-Chip Primary PCI IDE Enable/Disable Primary IDE port. It also relates to the drives displayed on the IDE
  • Foxconn G31MXP | English Manual. - Page 45
    General Help F5: Previous Values F7: Optimized Defaults ► OnBoard Audio Controller This item is used to enable or disable the onboard audio controller. ► OnBoard LAN Controller This item is used to enable or disable the onboard LAN controller. ► OnBoard LAN Boot ROM This item is used to enable or
  • Foxconn G31MXP | English Manual. - Page 46
    3 ► OnBoard FDC Controller This item is used to enable or disable the onboard FDC controller. ► OnBoard Serial Port 1 This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial port 1. ► OnBoard IrDA Port This item is used to assign the I/O address and interrupt
  • Foxconn G31MXP | English Manual. - Page 47
    full/low speed. ► USB Keyboard Function This item is used to enable the support for USB keyboard on legacy OS. If you have a USB keyboard, set to enable the support for USB mouse on legacy OS. If you have a USB mouse, set to auto or enabled. ► ***USB Mass Storage Device Boot Setting*** BIOS auto
  • Foxconn G31MXP | English Manual. - Page 48
    CPU and L2 configuration context. Control starts from the processor's reset vector after the wake event. (also called Suspend to RAM) S4 - The S4 sleeping state is the lowest power, longest wake latency sleeping state supported by ACPI the BIOS to distinguish whether or not the boot is going to wake from
  • Foxconn G31MXP | English Manual. - Page 49
    the energy saving mode of the ACPI function. When you select " . ► Wake Up on LAN This item is used to set the system to wake up by LAN. ► Resume by Alarm Management Relativ... ► HPET Support HPET stands for High Precision Even Timer. If you have the HPET disabled, then windows does not have access
  • Foxconn G31MXP | English Manual. - Page 50
    3 ► Power On by Mouse When enabled, it allows you to use the mouse to wake up the system from soft off and green mode. This feature requires an ATX power supply. ► Power On by Keyboard This item allows you to use the keyboard to wake up the system from soft off and green mode. This feature requires
  • Foxconn G31MXP | English Manual. - Page 51
    . When the temperature of CPU is higher than the set value, the motherboard will send out warning information. ► CPU Vcore/+ 3.3V/+5V/+12V S��ta�r�t�P��W�M���V�a�lu�e� It allows you to set an initial PWM value to drive the fan when the temperature reaches Start value and smart fan begins its
  • Foxconn G31MXP | English Manual. - Page 52
    3 ► Delta Tempe��r�tu�r�e� It is used to set the delta value for temperature. When change of the temperature reaches plus/minus delta value, then the PWM will be increased or decreased by a step value based on the slope formula. 45
  • Foxconn G31MXP | English Manual. - Page 53
    components. But if the optimized performance parameters to be set cannot be supported by your hardware devices, the system may fail to work. It the original one. If you select "System" for the Security Option in "Advanced BIOS Features" menu, then you will be asked to enter a password when the
  • Foxconn G31MXP | English Manual. - Page 54
    The utility CD that came with the motherboard contains useful software and several utility drivers that enhance the motherboard features. This chapter includes the following information: ■ Utility CD content ■ Install driver and utility ■ FOX ONE ■ FOX LiveUpdate ■ FOX LOGO ■ FOX DMI Note : Because
  • Foxconn G31MXP | English Manual. - Page 55
    guide you how to install. 1. Install Driver Use these options to install all the drivers for your system. You should install the drivers in order, and you need to restart your computer after all the drivers have been installed. A. Intel Chipset Driver B. Realtek HDA Audio Driver C. Realtek 811X LAN
  • Foxconn G31MXP | English Manual. - Page 56
    "Intel Chipset Driver" to install it first. After that, you can click "One Click Setup" to install all the other drivers left, or you can click on each individual driver to install it manually. Manual Installation Step by Step Automatic Installation by One Click. Click to visit Foxconn's website
  • Foxconn G31MXP | English Manual. - Page 57
    Supporting Operating Systems : ■ Windows 2000 ■ ■ Windows 2003 (32-bit and 64-bit) ■ Windows XP (32-bit and 64-bit) Windows Vista (32-bit and 64-bit) Using FOX ONE : The very first time you run FOX ONE, F.I.S. Calibration function (FOX Intelligent Stepping) will require you to calibrate the CPU
  • Foxconn G31MXP | English Manual. - Page 58
    1. Main Page Show CPU Information Toolbar Alert Lamp 4 Switch Button Skin Button Exit Minimum Configuration Homepage Monitor Frequency/Voltage/Fan speed/Temperature value Toolbar FOX ONE Click here to go back to FOX ONE full screen Click here will drop the FOX ONE to Windows system tray 51
  • Foxconn G31MXP | English Manual. - Page 59
    Apply the changes Cancel the changes Exit Click this button to exit the program. Minimum Click this button to drop the FOX ONE to Windows system tray located at the lower right corner of your screen. Homepage Click this button to visit Foxconn motherboard website : http://www.foxconnchannel.com 52
  • Foxconn G31MXP | English Manual. - Page 60
    value is 1 second. 2). Simple Mode : To select which message of system settings are to be displayed in the Simple Mode. Messages such as CPU frequency, voltage...etc., they can be displayed one by one in Simple Mode. 3). F.I.S. Calibration (FOX Intelligent Stepping, Optional) This function will re
  • Foxconn G31MXP | English Manual. - Page 61
    is collected, it will ask you to restart your computer now. Later on, when the FOX ONE program is activated, and F.I.S. feature (in CPU Page) is also enabled, FOX ONE will automatically adjust your CPU clock according to your system loadings. (Loadings are like Power Gaming, Data Mining...etc.) 54
  • Foxconn G31MXP | English Manual. - Page 62
    system. When system restarts, run FOX ONE again, it will display a recommended highest CPU clock for you, click to apply it. Go to CPU page Adjust by manual Press Auto button to let FOX ONE check the highest CPU clock you can use. 4 Reset the changes FIS Features : Apply the Select the
  • Foxconn G31MXP | English Manual. - Page 63
    of your system to restart the computer. Run FOX ONE program again, it will inform you the previous test found that 255MHz is the recommended CPU clock for your system. Click Yes to apply it to your system. Now, your system is running at
  • Foxconn G31MXP | English Manual. - Page 64
    defined in the FIS Calibration option of Configuration menu. Select Auto, CPU will automatically adjust its clock according to current system loading. 4 PCI Express frequencies by manual. Go to Freq. page Close this page Select the option you want to set Adjust by manual Reset the changes Apply
  • Foxconn G31MXP | English Manual. - Page 65
    and enable the alert function. Go to Limit Setting page Show current CPU temperature value Enable alert function when the CPU temperature is higher than high limit value Show current high limit value of the CPU temperature 4 Set high limit by dragging the lever 4.2 Limit Setting - System
  • Foxconn G31MXP | English Manual. - Page 66
    runs slower than the low limit rpm value Show current low limit rpm value of CPU fan 4 Set low limit rpm by dragging the lever 4.4 Limit Setting - System Fan This page lets you to set system fan low limit rpm and
  • Foxconn G31MXP | English Manual. - Page 67
    value of FAN1 fan Set low limit rpm by dragging the lever 5. Voltage Page - Voltage Control (Optional) This page lets you set CPU voltage, memory voltage and North Bridge voltage manually. CPU voltage can be stepped up/down by a unit of 12.5mV, while memory is 0.05V/step, and North Bridge is 0.04V
  • Foxconn G31MXP | English Manual. - Page 68
    4 6. Fan Page - Fan Control This page lets you enable Smart Fan function or set the fan speed by manual. When Smart Fan is selected, you must use a 4-pin CPU cooler in your system. Go to Fan page Enable or disable smart fan function Set fan speed by dragging the lever Apply the changes 61
  • Foxconn G31MXP | English Manual. - Page 69
    FOX LiveUpdate FOX LiveUpdate is a useful utility to backup and update your system BIOS, drivers and utilities by local or online. Supporting Operating Systems : ■ Windows 2000 ■ Windows XP (32-bit and 64-bit) ■ Windows 2003 (32-bit and 64-bit) ■ Windows Vista (32-bit and 64-bit) ! Please set the
  • Foxconn G31MXP | English Manual. - Page 70
    is "C:\Desktop\My Documents" in Windows XP and "Documents" in Vista. Make sure you can remember the file name together with the directory Key in a BIOS name Click here which it is stored, prevented that you may need them to recover your BIOS later. 1-3 Local Update - Update This page helps you to
  • Foxconn G31MXP | English Manual. - Page 71
    the wizard to finish the update operation. Click here 4 Current information Select BIOS to update Search new BIOS from Internet Browse detailed information Update BIOS Close the window 2-2 Online Update - Update Driver This page lets you update your system drivers from Internet. Click "start
  • Foxconn G31MXP | English Manual. - Page 72
    the driver to update Browse detailed information Install the selected driver Close the window 2-3 Online Update - Update Utility This page lets you update utilities from Internet. Click "start", it will search the new utilities from Internet. Then follow the wizard to finish the update operation
  • Foxconn G31MXP | English Manual. - Page 73
    will search all new BIOS/drivers/utilities from Internet. Then follow the wizard to finish the update operation. Click here Current information Search all new BIOS/ drivers/utilities from Internet Close the window Browse detailed BIOS information Browse detailed driver information Browse detailed
  • Foxconn G31MXP | English Manual. - Page 74
    3. Configure 3-1 Configure - option This page lets you set auto search options. After you enable the auto search function, FOX LiveUpdate will start its searching from Internet and if any qualified item found, it will pop out a message on the task bar to inform you to do the next step. Click here
  • Foxconn G31MXP | English Manual. - Page 75
    prompt you to install the new version. 4 Prompt you to install the new FOX LiveUpdate 3-2 Configure - System This page lets you set the backup BIOS location and change different skin of the FOX LiveUpdate utility. Click here Determine if the FOX LiveUpdate can auto run when the system starts up
  • Foxconn G31MXP | English Manual. - Page 76
    to flash(Only available to motherboard with backup BIOS ROM ) Select to flash Boot Block Select to clear CMOS Apply the changes Reset to default value ! We recommend that you should better keep the default setting unchanged to avoid any damage. 4. About & Help This page shows some information
  • Foxconn G31MXP | English Manual. - Page 77
    Logo. Boot time Logo will be displayed if you enable the BIOS "Full Screen Logo Show" setting in "Advanced BIOS Features" menu. Supporting Operating Systems : ■ Windows 2000 ■ Windows XP (32-bit and 64-bit) ■ Windows 2003 (32-bit and 64-bit) ■ Windows Vista (32-bit and 64-bit) Using FOX LOGO: Main
  • Foxconn G31MXP | English Manual. - Page 78
    Dump. With DMI information, system maker can easily analyze and troubleshoot your motherboard if there is any problem occurred. Supporting Operating Systems : ■ Windows 2000 ■ Windows XP (32-bit and 64-bit) ■ Windows 2003 (32-bit and 64-bit) ■ Windows Vista (32-bit and 64-bit) Using FOX DMI: Please
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
G31MXP Series
Motherboard
User’s Manual