Frigidaire AEQ6000ES Operating Instructions

PN 134609300B (071

2

)

DRYER OPERATING INSTRUCTIONS

The estimated drying time will be displayed for about

5 minutes.

Then the outside of the display will light up

in a circular track to indicate the drying time is

automatically being determined by the sensors.

When

the load has reached the selected dryness level, it will

continue to tumble, unheated, during a Cool Down period.

This helps reduce wrinkling and makes items easier to

handle during unloading.

The estimated Cool Down

time will be displayed.

Drying time varies depending on size and dampness of

load and fabric type.

If the load is too small or almost

dry, the sensing bars may not detect enough moisture

to continue the cycle and the cycle may end after a few

minutes.

Select a Timed Dry setting to dry such loads.

Room temperature and humidity, type of installation and

electrical voltage or gas pressure can also affect drying

time.

Towels

Select this Auto Dry cycle for towel loads.

Heavy Duty

Select this Auto Dry cycle for sturdy work clothes.

Normal

Select this Auto Dry cycle for cotton items.

Perm Press

Select this Auto Dry cycle for cottons and blends with

a no-iron finish.

Delicates

Select this Auto Dry cycle for knits and delicate items.

Before Operating Your Dryer

Read your dryer Owner’s Guide.

It has important

safety and warranty information.

It also has many

suggestions for best drying results.

To reduce the risk of fire, electric shock

or injury to persons, read the IMPORTANT SAFETY

INSTRUCTIONS in your dryer Owner’s Guide before

operating this appliance.

Operating Steps

Read “Drying Procedures” in your Owner’s Guide. It

explains these operating steps in detail.

1.

Prepare items for drying.

2.

Check that lint filter is clean and in place.

3.

Load the dryer. If desired, add a dryer fabric softener

sheet. Close the door.

4. Select

the appropriate cycle and

settings for each

load.

•

Turn the Cycle Selector knob to select the cycle.

The estimated drying time will be displayed.

•

A suitable drying temperature, dryness level and

options will automatically be indicated for each

cycle.

See the “Dryer Setting Chart” for more

details.

•

To change the temperature and dryness level, press

Temperature or Dryness until the desired selections

are made.

•

To select or delete an option, press Options; then,

while the indicator is blinking, press Select.

The

indicator will light when the option has been

selected.

it will no longer be lighted when the option

has been deleted.

•

If a temperature, dryness level or option is not

available for a cycle, it will not light.

•

Adjustments to the cycle will be remembered each

time that cycle is selected in the future.

•

To return to factory settings, press Start/Pause and

Select at the same time and hold until the signal

sounds.

5.

Press Start/Pause to begin the cycle.

•

To pause the cycle press Start/Pause.

To resume

the cycle, press Start/Pause again.

•

To stop or change the cycle, press Cancel.

6. A signal will sound at the end of the cycle and

periodically during Extended Tumble when the

Signal option is selected.

When the cycle ends,

remove items immediately and hang or fold.

7.

Clean the lint screen after every load.

Cycle Selection

Turn the Cycle Selector knob to the desired cycle.

For

best results, follow the fabric care label instructions on

items to be dried.

If the selection is changed after the

cycle starts, the indicator lights will blink, the signal

will beep and “

Err

” will be displayed.

To change the

selection after the cycle has begun, press Cancel

before making another choice.

Just turning the knob

to another selection will not change the cycle.

The

signal will beep and the status lights will flash, but the

original cycle will continue.

Auto Dry

Auto Dry cycles take the guesswork out of drying time.

Loads dried using the Towels, Heavy Duty, Normal, Perm

Press, and Delicates cycles will dry automatically at

the selected temperature to the desired dryness level.

The dryer uses sensing bars to sense

the moisture

level of the load as it tumbles through heated air.

Auto

Dry cycles save time and energy and protect fabrics.

Frigidaire AEQ6000ES Operating Instructions

Frigidaire AEQ6000ES - AffinityTM 5.8 cu. Ft. Dryer Manual

Frigidaire AEQ6000ES manual content summary: