Frigidaire ATF8000FS Operating Instructions
Frigidaire ATF8000FS - Gallery - Washer Manual
 |
UPC - 012505377525
View all Frigidaire ATF8000FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Frigidaire ATF8000FS manual content summary:
- Frigidaire ATF8000FS | Operating Instructions - Page 1
IMPORTANT SAFETY INSTRUCTIONS in your washer Owner's Guide before operating this appliance. Operating Steps Read and follow "Washing Procedures" in your Owner's Guide. It provides detailed information for preparing the wash load and choosing control settings to ensure best washing results. 1. Sort - Frigidaire ATF8000FS | Operating Instructions - Page 2
or the load becomes unbalanced. The approximate time remaining will be displayed during the cycle. Status Lights The following will be displayed at the appropriate times during the cycle: • Door Lock • Wash • Rinse • Final Spin Drum Light The drum light will turn on when the washer door is opened - Frigidaire ATF8000FS | Operating Instructions - Page 3
Deep Clean Sanitary 1 hr. 5408 min. Normal 4453 minutes Heavy Duty 44886 minutes Perm Press 3660 minutes Delicates 32559 minutes Handwash 32538 minutes Spin Only 12 minutes Auto Temp Hot/Cold * Auto Temp Warm/Cold * * * Auto Temp Warm/Warm Auto Temp Cold/Cold * * Tap Cold/Cold - Frigidaire ATF8000FS | Operating Instructions - Page 4
électrique ou de blessure, lisez les INSTRUCTIONS importantes de sécurité contenues dans votre Guide du propriétaire avant de faire fonctionner cycle d'un délai maximum de 14 heures, si vous le désirez. 8. Démarrez la machine à laver. • Fermez la porte et appuyez sur Démarrer/pause. La ma- chine à - Frigidaire ATF8000FS | Operating Instructions - Page 5
couleur et le niveau de saleté. Pour de meilleurs résultats, suivez les instructions sur l'étiquette de soins et utilisez l'eau la plus chaude qui soit sé tre affectée par les réglages du chauffe-eau et sa distance de la machine à laver, l'utilisation d'eau dans le reste de la maison et les - Frigidaire ATF8000FS | Operating Instructions - Page 6
Temp Warm/Warm) Température Automatique Froid/Froid (Auto Temp Cold/Cold) Eau de Robinet Froid/Froid (Tap Cold/Cold) Vitesse d'essorage (Spin Speed) Nettoyage à fond Désinfection (Deep Clean Sanitary) 1 hr. 5408 min.. * Normal Haut Rendement (Heavy Duty) 435 minutes 4486 minutes * * Pressage
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
WASHER OPERATING INSTRUCTIONS
PN 134851000B
(0706)
•
Suitable wash and rinse water temperatures, final
spin
speed, options and soil level for each cycle will
automatically be displayed.
See the Cycle Selection
Chart
for more details.
•
To change the settings, press the Temperature, Spin Speed
and Soil Level
buttons.
•
To select or delete an option, press Options, then, while
the indicator is blinking, press Select.
The indicator will
light when the option has been selected.
It will no longer
be lighted when the option has been deleted.
•
To provide the best care for your laundry, not every setting
or option is available with every cycle.
if a setting or
option is not available, its indicator will
not light.
•
Adjustments to the cycle will be remembered each time
that cycle is selected in the future.
To return to the factory
settings, press Start/Pause and Select at the same time
and hold until a signal sounds.
7.
Select Delay Start to delay the beginning of the cycle for up to
14 hours, if desired.
8.
Start the washer.
•
Close the door and press Start/Pause.
The washer will
not operate with the door open.
The status lights will blink,
the signal will beep and “
dr
” will be displayed as a
reminder
to close the door.
•
As a safety measure, the door will automatically lock during
the entire wash cycle and the Door Lock indicator will be
lighted.
•
To add a forgotten item to the wash drum, press Start/
Pause, open the door, add the item, close the
door and
press Start/Pause to resume the cycle.
“
PAU
”
will be
displayed alternately with the estimated cycle time.
•
If the cycle is interrupted during spin, it will take
approximately 2-3 minutes for the door lock to release. DO
NOT force open the door.
•
To stop the washer, press Cancel.
9.
A signal will sound when the Signal option is selected.
Remove
items from the washer when the cycle ends.
Before Operating Your Washer
Read your washer Owner’s Guide. It has important safety and
warranty information. It also has many suggestions for best
washing results.
To reduce the risk of fire, electric shock or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS in your
washer Owner’s Guide before operating this appliance.
Operating Steps
Read and follow “Washing Procedures” in your
Owner’s Guide. It
provides detailed information for preparing the wash load and
choosing control settings to ensure best washing results.
1. Sort laundry into loads that can be washed together.
2.
Prepare items for washing.
3.
Pretreat stains and heavy soil.
4.
Add laundry load to the wash drum.
5.
Add laundry products to the dispenser.
•
Detergent, bleach and fabric softener will be dispensed at
the proper time in the cycle.
•
Open the dispenser drawer and add the recommended
amount
of a high efficiency
detergent to the
detergent compartment.
•
If desired, add liquid chlorine bleach and liquid
fabric softener
to the appropriate compartments.
•
Slowly close dispenser drawer.
•
Any water remaining in the dispenser at the end of the cycle
is a result of siphoning action and part of the normal operation.
6.
Select the appropriate cycle and settings for the load.
•
Turn the Cycle Selector knob in either direction to select the
cycle.
The estimated cycle time will be displayed.
Cycle Selection
Turn the Cycle Selector knob to the desired cycle.
For best
results, follow the fabric care label instructions on items to be
washed.
To change the selection
af
ter the cycle has begun,
press Cancel
before making another choice.
Just turning the knob
to another selection will not change the cycle.
Deep Clean Sanitary
Use the Deep Clean cycle for heavily soiled colorfast items that
should be washed in very hot water.
Only the Hot/Cold
Temperature setting is available.
The household water heater
should be set at a minimum of 120° F.
If the setting is lower, the
cycle time will be extended by 30 minutes or more.
The wash water is heated by an internal boost heater to a
maximum of 152° F as the load tumbles for up to 90 minutes
.
“ SAn”
is displayed during the wash phase alternately with the
estimated cycle time.
Cold water is added to cool down the load
prior to drain and spin.
If the voltage at your outlet is under 110V,
the internal heater may not adequately heat the wash water.
(If the cycle is interrupted while the water is heating, the final
temperature of the wash water may be lower and sanitation may
be reduced).
As a precaution, the washer door is locked once the water
temperature reaches 130° F.
If the cycle is cancelled during the
wash phase and if the water temperature is greater than 150° F,
an automatic Cool Down and drain will occur before the door can
be opened.
“cd”
will be displayed.
Heavy Duty
The Heavy Duty cycle provides 20 minutes of reversing tumble
wash action for heavily soiled sturdy items.
Hot water is
recommended to remove heavy soil and most stains.
Stain Clean,
Extra Rinse and Extended Spin are available options.