Frigidaire ATF8000FS Installation Instructions
Frigidaire ATF8000FS - Gallery - Washer Manual
 |
UPC - 012505377525
View all Frigidaire ATF8000FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Frigidaire ATF8000FS manual content summary:
- Frigidaire ATF8000FS | Installation Instructions - Page 1
. This will simplify the installation and ensure the washer is installed correctly and safely. Leave these instructions near the washer after installation for future reference. NOTE: The electrical service to the washer must conform with local codes and ordinances and the latest edition of the - Frigidaire ATF8000FS | Installation Instructions - Page 2
mm socket with ratchet. 3. Channel-lock adjustable pliers. 4. Carpenter's level power supply cord is absence of local codes, with the National Electrical Codes, ANSI/NFPA 70 (latest edition). If be installed within 42 inches (107 cm) of your washer's water inlet. The faucets MUST be 3/4 inch (1.9 - Frigidaire ATF8000FS | Installation Instructions - Page 3
21) inches (cm) 281/4" (71.76) NOTE: For pedestal installations, see additional installation instructions included with the pedestal. For stacking installations, see additional installtion instructions included with the stacking kit. For under counter installations, no special top is required. 27 - Frigidaire ATF8000FS | Installation Instructions - Page 4
temperature should never be below 60 ° F (15.6 ° C) for proper washer (detergent breakdown) operation. 2. In an area where it will come in contact cm) Top = 0 in. (0 cm) When installed in closet: Front = 1 in. (2.54 cm) Closet door ventilation required: 2 louvered openings each 60 in2 (387 cm2), 3 - Frigidaire ATF8000FS | Installation Instructions - Page 5
washer is to be transported at a later date, the shipping support washer. 1. For free standing installation and with the washer in it's final position, place a level on top of the washer. Adjust the leveling legs so the washer is level front the washer. Washer tighten another 2/3 turn with pliers. Do - Frigidaire ATF8000FS | Installation Instructions - Page 6
leaks and proper operation. Cable Tie 11. If your washer does not operate, please review the "Avoid Service Checklist" in your Owner's Guide before calling for service. 12. Place these instructions in a location near the washer for future reference. NOTE: A wiring diagram and technical data - Frigidaire ATF8000FS | Installation Instructions - Page 7
5. Attachez le support du tuyau de disjoncteurs. 9. Lire la Notice de fonctionnement et le Guide de l'utilisateur qui accompagnent la laveuse. Ces documents de Service et pièces de Frigidaire Company Authorized Parts Distributor, 1-800-944-9044, ou visitez notre website , www.frigidaire .com - Frigidaire ATF8000FS | Installation Instructions - Page 8
boulons • 4 entetoises • 1 attaches à pressio dégager cordon du service • 2 pince du tuyau de drainage 7. Couvrez les trous de la quincaillerie d'expédition, les attaches et supports, pour prévenir tout dommage durant l'exp instructions d'installation additionnelles incluses avec le piédestal. 5 - Frigidaire ATF8000FS | Installation Instructions - Page 9
EMPLACEMENT DE LA LAVEUSE NE PAS INSTALLER LA LAVEUSE : 1. Dans un endroit exposé à un écoulement d'eau ou aux conditions atmosphériques. La température ambiante ne doit jamais descendre en-dessous de 15,6°C (60°F) pour que la laveuse fonctionne correctement. 2. Dans un endroit où elle serait en - Frigidaire ATF8000FS | Installation Instructions - Page 10
d'installation supplémentaires incluses avec le piédestal. NOTE: Pour les installations de superposition, Voir les instructions d'installation supplémentaires incluses avec le kit de superposition. NOTE: Pour les Pour des installations d'undercounter, aucun dessus spécial n'est exigé. 27 - Frigidaire ATF8000FS | Installation Instructions - Page 11
terre conformément à tous les codes et ordonnances locaux ou, s'il n'existe pas de codes locaux, conformément au Code ANSI/NFPA 70 (l'édition la pression maximum entre l'eau chaude et l'eau froide de 10 lb/po²). Le service des aqueducs de votre localité peut vous aider à déterminer la pression d'eau - Frigidaire ATF8000FS | Installation Instructions - Page 12
Code ANSI/NFPA 70, ou au Canada, le Code canadien d'électricité, ACNOR C22.1, partie 1. Pour votre sécurité, suivre les directives données dans le présent guide téléphone d'un voisin. Suivre les instructions de la compagnie de gaz. · technicien qualifié, un agent de service ou la compagnie de gaz.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
Installation
Instructions
Full Size Tumble Action Washers
Before beginning installation, carefully read these instructions. This will simplify the
installation and ensure the
washer is installed correctly and safely. Leave these instructions
near the washer after installation for future reference.
NOTE: The electrical service to the washer must conform with local codes and ordinances
and the latest edition of the National Electrical Code, ANSI/NFPA 70.
Contents
SUBJECT
PAGE
Pre-Installation Requirements
2
Electrical Requirements
2
Grounding Requirements
2
Water Supply Requirements
2
Drain Requirements
2
Rough-In Dimensions
3
Location Of Your Washer
4
Unpacking
4-5
Installation
5-6
Replacement Parts
6
Printed in U.S.A.
P/N 1349
656
00 (070
8
)
For your safety the information in
this manual must be followed to minimize the risk
of fire or explosion or to prevent property damage,
personal injury or loss of life.
-
Do not store or use gasoline or other flammable
vapors and liquid in the vicinity of this or any
other appliance.
- WHAT TO DO IF YOU SMELL GAS
·
Do not try to light any appliance.
·
Do not touch any electrical switch; do not
use any phone in your building.
·
Clear the room, building or area of all
occupants.
·
Immediately call your gas supplier from a
neighbor’s phone. Follow the gas suppliers
instructions.
·
If you cannot reach your gas supplier, call
the fire department.
Installation and service must be performed by a
qualified installer, service agency or the gas
supplier.