Frigidaire FEX831FS Operating Instructions (Operating Instructions)

Frigidaire FEX831FS - 27" Electric Laundry Center Manual

Frigidaire FEX831FS manual content summary:

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

Cycle Selection
Turn cycle selector clockwise to desired cycle and
setting.
Each cycle ends with a cool down period. The heat
automatically turns off and the load continues to tumble
for 5-10 minutes. This reduces wrinkling and makes
items easier to handle during unloading.
Drying time varies depending on size and dampness of
load, weight and fabric type. Room temperature and
humidity, type of installation and electrical voltage or
gas pressure can also affect drying time.
Auto Dry Cycle
This cycle is best for regular and permanent press items
that can be tumble dried.
Drying time is determined automatically at the
temperature selection of your choice. This cycle is best
for items of similar fabric, weight and construction.
For items requiring more drying time, set cycle selector
on
MORE DRY
.
For items requiring less drying time, set cycle selector
on
LESS DRY
.
Time Dry Cycle
This cycle provides up to 100 minutes of drying time at
the temperature selection of your choice.
P/N 134808700 (0610)
Before Operating Your Laundry
Center
Read
your
laundry center
Owner's
Guide.
It has
important safety and warranty information. It also has
many suggestions for obtaining the best drying results.
To reduce the risk of fire, electric shock,
or injury to persons, read the IMPORTANT SAFETY
INSTRUCTIONS in your laundry center Owner's Guide
before operating this appliance.
7.
Start dryer.
Push the Push to Start button for 2
seconds, or turn Turn to Start knob to ON, hold for
2 seconds and release.
8.
A signal will sound when the cycle ends.
9.
Remove items immediately and hang or fold.
10.
Clean lint screen after every load.
LAUNDRY CENTER DRYER
OPERATING
INSTRUCTIONS
±²³³´µ¶·
¸¹¶²´µ¶·
º¹¹±
µ¹»¼
½¾
¿¾
À¾
Á¾
¾
þ
ľ
ž
ƾ¾
ÇÈɹ¸ÇÉʺ
Éʸ²µ´µ¶·
³ÉǶÉ
ɲ¸Ë²¶ÇÉȶ²
̼Êɳ͵²±ÊºÇɲ³
±¹»´Î²ÇÉ
º¹¹±
µ¹»¼
ƾ
»ÎÊɲ³Í
¶²ÏȱǶ
ÎÊÏδβÇÉ
Operating Steps
1.
Prepare items for drying.
2.
Check that lint screen is clean and in place.
3. Load the dryer.
If desired, add a dryer fabric
softener sheet.
4.
Close the dryer door.
5.
Set Temperature control.
6.
Turn cycle selector clockwise to desired setting.
Temperature Selection
Always follow directions on fabric care labels.
The
WHITES/REGULAR-HIGH HEAT
and
DELICATEs-
LOW HEAT
temperature settings may be used with any
cycle setting.
Cool Down
setting tumbles the load without heat. Use
Cool Down to freshen clothing, pillows or blankets, or to
dust draperies.
To avoid fire hazard, do not use heat to
dry items containing feathers or down, foam rubber,
plastics, or similarly textured, rubber-like materials. Use
the Cool Down setting only.