Frigidaire FGCD2444SW Wiring Diagram
Frigidaire FGCD2444SW Manual
 |
View all Frigidaire FGCD2444SW manuals
Add to My Manuals
Save this manual to your list of manuals |
Frigidaire FGCD2444SW manual content summary:
- Frigidaire FGCD2444SW | Wiring Diagram - Page 1
for 3 seconds. To unlock, press and hold the AIR DRY pad for 3 seconds. Disconnect electrical power at the fuse box or circuit breaker box before servicing under this product. Electrical power may be present on some parts under this product, even if not in use. Failure to follow this warning could - Frigidaire FGCD2444SW | Wiring Diagram - Page 2
Standard Dry Air Flow TROUBLE SHOOTING TIPS Pump Assembly of the heater should be made in the dry portion of the service test mode. When the control advances to the "dry" portion cover will not open". 1. Instruct customer/user 2. Instruct customer/user 3. Instruct customer/user on proper loading
-
1 -
2
 |
 |
SERVICE DATA SHEET
P/N: A05272301RevA
Artwork: A05272301Rev001
This information is intended for use by persons having electrical and
mechanical training and a level of knowledge of these subjects generally
considered acceptable in the appliance repair trade.
Electrolux Home
Products North America cannot be responsible, nor assume any liability,
for injury or damage of any kind arising from the use of this Service
Data Sheet.
BK
............
Black
BU
............
Blue
PK
............
Pink
R
..............
Red
Viol
..........
Violet
W
.............
White
Y
..............
Yellow
R-Y
.........
Red/Yellow
R-BK
......
Red/Black
COLOR CODE
OPERATION
WARNING
DISPLAY CODES (LED)
WIRING DIAGRAM
CYCLE SELECTION OPTIONS
To start -----------------
Close door fully to latch.
Press START/PAUSE pad.
To delay start ---------
Close door fully to latch.
Press DELAY TIME pad to select desired
delay time.
To select a new cycle
or option -------------
Press desired cycle and/or option pad.
The indicator lights will change.
Press
START/PAUSE within 15 seconds to begin cycle.
To cancel
a cycle ----------------
Press CANCEL.
Dishwasher will drain for 90 seconds, then
shut off.
To Lock ----------------
Press and hold the AIR DRY pad for 3 seconds.
To unlock, press and hold the
AIR DRY pad for 3 seconds.
Disconnect electrical power at the
fuse box or circuit breaker box
before servicing under this product.
Electrical power may be present on
some parts under this product, even if
not in use.
Failure to follow this warning could
result in serious injury or death.
Interval Number
Description
1
2
6
4
3
5
7
8
Fill/Det. Dispenser
Wash/Heat
Wash/Heat/Det. Disp.
Wash/Heat
Pause/Heat
Drain
Dry Heater On/Drain
End State
Interval Duration
(sec)
80
60
0.4
75
3
60
90
90
Water Valve
Circulation Motor
Drain Motor
Heater
Dispenser
Clean LED
Washing LED
Sanitize LED
WATER/SERVICE TEST
The water/service test,
(WST) is a special function
initiated from the power
failure mode.
While in power failure mode
- simultaneously press the AIR
DRY and START/PAUSE pad.
The dishwasher will then step
through the test cycle per the
chart.
Pushing the START/
PAUSE pad will advance the
dishwasher to the next step.
Fill Number
1
1
1
1
1
1
1
1
9
1
1
0
0
0
1
1
1
1
1
0
1
1
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
1
1
0
0
0
0
0
0
0
1
0
X
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
00
0
E
lectronic
S
eries
Pause
WASHING----------
Wash portion of cycle.
SANITIZED---------
The SANITIZED criteria has been met.
Indicator light
will switch off when door is opened for 15 seconds.
CLEAN--------------
Shows completion of cycle.
Indicator light will
switch off when door is opened for 15 seconds.
*In step 8 when the AIR DRY pad is pressed this selects the heater on
or off.