Frigidaire FGHB2844LF Complete Owner's Guide (English) - Page 8

Installation 4 Lift the door while adjusting the washer. To raise the door, rotate washer clockwise (when viewed from the bottom). To lower door, rotate washer counter-clockwise (when viewed from the bottom). To adjust the flipper mullion: 1 Loosen the screw located on the flipper mullion hinge. Raising/Lowering Door 5 Re-tighten the screw, ensuring it is between the spokes of the washer. Screw will not be tight, just insert until it is flush with the hinge. Adjusting Flipper Mullion Screw 2 Adjust flipper mullion height. For proper connection with the flipper mullion guide, there should be a separation about the thickness of a coin (0.060 inches, or 1.5 mm) between the guide and flipper mullion. Screw  NOTE If after adjusting doors higher the door makes a popping/clicking sound, remove screw and replace with the longer one supplied in the handle package. Adjusting Flipper Mullion Height 3 Re-tighten screw. 8