Frigidaire FGHD2465NF Complete Owner's Guide (English) - Page 4

DISHWASHER FEATURES Your dishwasher cleans by spraying a mixture of hot water and detergent through the spray arms against soiled surfaces. Next, the dishwasher fills with water covering the filter area. Water is then pumped through the filter and spray arms. Soil particles go down the drain as the water is pumped out and replaced with clean water. The number of water fills will vary with the cycle being used. Upper Spray Arm Blower Vent Assembly Bowl Tines Top Rack Middle Spray Arm Removable Versa-tray Adjustable Upper Rack Tub Gasket Serial Label (located on right side of tub) Bottom Rack Glass Trap Overfill Protector Detergent Dispenser Silverware Basket Orbit CleanTM Spray Arm Self-Cleaning Filter Heating Element Vent Rinse Aid Dispenser Getting Started 1. Load dishwasher (See Preparing and Loading Dishes). 2. Add detergent (See Dishwasher Dispenser & Detergents). 3. Add rinse aid (See Rinse Aid). 4. Select desired CYCLE (See Cycle Chart). The indicator light above the pad will glow when selected. 5. Select desired OPTIONS (See Energy Options). The indicator light above the pad will glow when selected. 6. Run hot water faucet nearest dishwasher until water is hot. Turn water off. 7. To start, press START/CANCEL pad. 8. Close door to latch. NOTE The dishwasher is programmed to remember your last cycle so you do not have to reset each time. To start the dishwasher using the same cycle and options selected on the previous wash, just press the START/CANCEL pad. 4