Frigidaire FGR311FS Operating Instructions

Frigidaire FGR311FS - 27" Gas Dryer Manual

Frigidaire FGR311FS manual content summary:

  • Frigidaire FGR311FS | Operating Instructions - Page 1
    IMPORTANT SAFETY INSTRUCTIONS in your dryer owner's guide before operating this appliance. Operating Steps Read Drying Procedures in your Owner's Guide. It explains voltage or gas pressure can also affect drying time. Energy Saving Tips • Keep the lint screen clean and exhaust the dryer correctly.
  • Frigidaire FGR311FS | Operating Instructions - Page 2
    60 COOL DOWN10 20 30 50 40 Avant de vous servir de votre sécheuse Choix des cycles Lire votre guide de l'utilisateur. Il renferme d'importantes Suivre toujours les instructions données sur les étiquettes informations sur la sécurité et la garantie. Il contient aussi de des vêtements. nombreuses
  • Frigidaire FGR311FS | Operating Instructions - Page 3
    COOL DOWN LESS 100 TIMED DRY 90 80 MORE 70 Antes de Utilizar su Secadora COOL DOWN10 20 30 60 50 40 Lea el Manual del Usuario de esta secadora. Contiene 3. Cargue la secadora. Si desea, agregue una hoja de papel información de garantía y seguridad importante. También contiene suavizante
  • Frigidaire FGR311FS | Operating Instructions - Page 4
    , temperatura ambiental y humedad, tipo de • Abrir la puerta sin necesidad deja escapar el aire caliente, lo instalación, voltaje eléctrico o presión de gas. cual prolonga el tiempo de secado. Auto Dry (Automático secado) Este es el mejor ciclo para prendas de regular ó planchado permanente que
  • 1
  • 2
  • 3
  • 4

OPERATING INSTRUCTIONS
±²³³
´µ¶²
·µµ±¸¹µº»
¼½
¾½
¿½
À½
Á½
½
ý
Ľ
Ž½
ÆÇȵ¸¹¶É
ÈÊ´²¹¸¹¶É
³ÈƶÈ
10
Before Operating Your Dryer
Read your dryer Owner's Guide.
It has important safety and
warranty information. It also has many suggestions for best drying
results.
To reduce the risk of fire, electric shock, or injury
to persons, read the IMPORTANT SAFETY INSTRUCTIONS in your
dryer owner's guide before operating this appliance.
Operating Steps
Read Drying Procedures in your Owner's Guide.
It explains
these operating steps in detail.
1.
Prepare items for drying.
2.
Check that lint screen is clean and in place.
3.
Load the dryer.
If desired, add a dryer fabric softener sheet.
4.
Close the dryer door.
5.
Turn cycle selector clockwise to desired setting.
6.
Start dryer.
Push the Push to Start button for 2 seconds, or
turn the Turn to Start control clockwise to ON.
Hold for 1-
2 seconds and release.
7.
At end of cycle, remove items immediately and hang or
fold.
8.
Clean lint screen after every load.
Cycle Selection
Always follow directions on fabric care labels.
To avoid fire hazard, do not use heat to dry items
containing feathers or down, foam rubber, plastics, or similarly
textured, rubber-like materials. Use Cool Down (no heat) setting
only.
Turn cycle selector clockwise to desired cycle and setting. Each
cycle ends with a cool down period. The heat automatically turns
off and the load continues to tumble for 5-10 minutes. This
reduces wrinkling and makes items easier to handle during
unloading.
Drying time varies depending on size and dampness
of load, weight and fabric type. Room temperature and humidity,
type of installation and electrical voltage or gas pressure can also
affect drying time.
Timed Dry
This cycle provides up to 100 minutes of drying time at
high heat
for regular and permanent press items.
When drying permanent press items, turn the cycle selector to 40-
50 minutes. This is the average time needed to dry most loads of
permanent press items.
The load tumbles without heat during the last 10 minutes of the
Timed Dry cycle. Use this setting to freshen clothing, pillows or
blankets or to dust draperies. Heat-sensitive items such as
plastics, foam rubber or similarly textured rubber-like materials or
items containing feathers or down should be dried
only
with this
setting.
Auto Dry
This cycle is best for regular and permanent press items that can
be tumble dried at
high heat.
Drying time is determined
automatically.
This cycle is best for items of similar fabric, weight and construction.
• For items requiring more drying time, set cycle selector on
MORE DRY
.
For items requiring less drying time, set cycle selector on
LESS
DRY
.
When the items are dry, the heat automatically turns off and the
load is tumbled for approximately 5 minutes without heat.
Energy Saving Tips
Keep the lint screen clean and exhaust the dryer correctly.
Sort laundry properly and select proper temperature and cycle
settings. Choose an automatic dry cycle whenever possible for
accurate drying time.
• Dry only full loads. Single items and small loads usually take
longer to dry.
Avoid overloading, adding wet items to a partially dry load, and
overdrying.
Dry one load after another to take advantage of a warm dryer.
Opening the door needlessly causes warm air to escape, which
prolongs drying time.
If possible, use the dryer on low humidity days.
Install the dryer in an area where the room temperature is at
least 45°F (7°C).
P/N 137103300 (0806)