Frigidaire GLEH1642FS Operating Instructions (Operating Instructions)
Frigidaire GLEH1642FS - 3.1 cu. Ft. Laundry Center Manual
 |
UPC - 012505376368
View all Frigidaire GLEH1642FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Frigidaire GLEH1642FS manual content summary:
- Frigidaire GLEH1642FS | Operating Instructions (Operating Instructions) - Page 1
Laundry Center Dryer Operating Instructions PRESS SAVER AUTOMATIC PRESS SAVER Before Operating Your Dryer Read your Owner's Guide. It has important safety and warranty information. It also has many suggestions for best drying results. To reduce the risk of fire WHITES installation and electrical voltage - Frigidaire GLEH1642FS | Operating Instructions (Operating Instructions) - Page 2
dry. Turn selector knob to Press Saver and start dryer. It is not and exhaust the dryer correctly. • Sort laundry properly and select dryer. • Opening the door needlessly causes warm air to escape, which prolongs drying time. • If possible, use the dryer on low humidity days. • Install the dryer - Frigidaire GLEH1642FS | Operating Instructions (Operating Instructions) - Page 3
PRESS SAVER Antes de Utilizar su Secadora Lea cuidadosamente el Manual del Usuario. Contiene información de garantía y seguridad de temperatura más apropiado para cada carga. Los reglajes de temperatura REGULAR/ WHITES--HIGH HEAT (calor regular-alto), PERM PRESS/ COLORS--MEDIUM HEAT (planchado - Frigidaire GLEH1642FS | Operating Instructions (Operating Instructions) - Page 4
mejor para las cargas de toallas. Seleccione el reglaje de temperatura REGULAR/WHITES-HIGH HEAT (Calor regular/blancsalto). REGULAR - Este reglaje es mejor la secadora en días de poca humedad. • Instale la secadora en un ambiente donde la temperatura sea de por lo menos 45°F (7°C). P/N - Frigidaire GLEH1642FS | Operating Instructions (Operating Instructions) - Page 5
fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS in your washer Use and Care Guide before operating this appliance Rinse in Whites/ Regular, Colors/Perm Press, or Delicates cycle. 8. Select Final Spin Speed as desired. 9. Push in the cycle selector knob and turn it - Frigidaire GLEH1642FS | Operating Instructions (Operating Instructions) - Page 6
instructions on fabric care labels. Note: There is no need to select a water level because the washer automatically adjusts the water in Whites/Regular, Colors/Perm Press, or Delicates cycle. • Select Extra Rinse Off to conserve water when knob is pulled out, and turns off at the end of the - Frigidaire GLEH1642FS | Operating Instructions (Operating Instructions) - Page 7
PARA EL FUNCIONAMIENTO NORMAL FAST WHITES/ EXTRA RINSE ON OFF COLORS/ Antes de poner la lavadora en funcionamiento Lea el Manual del Usuario de su lavadora Esto es debido a la acción de sifonaje y es parte del funcionamiento normal de la lavadora. Impreso en los EE.UU. P/N 134578800 (0506) - Frigidaire GLEH1642FS | Operating Instructions (Operating Instructions) - Page 8
puerta) - La luz indicadora está encendida cuando la perilla del programador está hacia afuera. La luz se apaga al final del ciclo. Consulte el Manual del Usuario para obtener información más detallada. CYCLE SIGNAL (Indicador de Ciclo) - Se oirà una señal al final del ciclo. P/N 134578800 (0506
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
Before Operating Your Dryer
Read your Owner's Guide.
It has important
safety and warranty information. It also has many
suggestions for best drying results.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your owner's guide
before operating this appliance.
Operating Steps
Read Drying Procedures in your Owner's
Guide.
It explains these operating steps in detail.
1.
Prepare items for drying.
2.
Check that lint screen is clean and in place.
3.
Load the dryer.
If desired, add a dryer fabric
softener sheet.
4.
Close the dryer door.
5.
Set Drying Temperatures control.
The
REGULAR/WHITES-HIGH HEAT, PERM PRESS/
COLORS-MEDIUM HEAT
, and
KNITS-MEDIUM
LOW HEAT and DELICATES-LOW HEAT
temperature settings may be used with any cycle
setting.
Cycle Selection
Turn cycle selector clockwise to desired cycle and
setting.
Each cycle ends with a cool down period. The heat
automatically turns off and the load continues to
tumble for 5-10 minutes. This reduces wrinkling
and makes items easier to handle during unloading.
Drying time varies depending on size and
dampness of load, weight and fabric type. Room
temperature and humidity, type of installation and
electrical voltage or gas pressure can also affect
drying time.
6. Turn cycle selector clockwise to desired
setting.
7.
Start dryer.
Turn the Turn to Start control
clockwise to ON. Hold for 1-2 seconds and
release.
8.
A signal will sound when the cycle ends.
9.
Remove items immediately and hang or
fold.
10.
Clean lint screen after every load.
Temperature Selection
Always follow directions on fabric care
labels.
To avoid fire hazard, do not use
heat to dry items containing feathers or down,
foam rubber, plastics, or similarly textured, rubber-
like materials. Use Air Fluff cycle only.
Printed in U.S.A.
Laundry Center Dryer Operating Instructions
P/N 134396400A (0403)
PRESS
PRESS
PRESS
PRESS
PRESS
SAVER
SAVER
SAVER
SAVER
SAVER
AUTOMATIC
AUTOMATIC
AUTOMATIC
AUTOMATIC
AUTOMATIC
PRESS
SAVER
PRESS
SAVER
PRESS
SAVER
PRESS
SAVER
PRESS
SAVER