Fujitsu A6220 A6220 Getting Started Guide

Be careful when installing the color lid.

Excessive force could damage your LCD.

DO NOT install Genuine Windows Vista

®

64-bit edition

if you are planning on using Windows

®

XP or Genuine

Windows Vista

®

32-bit edition.

Quick Tips

It takes approximately 4 hours to

charge a fully discharged single

battery with unit off or in

suspend mode.

Optimizing Battery Life

• Set power management setting

to Maximize Battery Life.

• Adjust display brightness levels

to lowest comfortable setting.

• Remove PC Cards and Express-

Cards when not needed.

• Utilize Suspend mode when

not using your notebook.

• Read the Power Management

section in your electronic User’s

Guide for additional features.

Adjusting Display Brightness

• Fn + F6 to decrease brightness

• Fn + F7 to increase brightness

Adjusting Volume

• Fn + F8 to decrease volume

• Fn + F9 to increase volume

• Stereo microphone/line in jack

depending on configuration.

• Stereo headphone/Optical Digital

Audio out jack or stereo head-

phone/Line Out/Optical Digital

Audio out jack.

Drivers

Look for the latest drivers on the

Drivers and Applications Restore

disc, or download them at

us.fujitsu.com/computers.

This convenient guide will lead you through the start-up

process and will also offer some valuable tips.

1. Open the Display Panel

Ensure that your LifeBook is on a hard level surface and that

•

the air vents are not blocked.

Lift the display, being careful not to touch the screen.

•

Adjust the display until it is at a comfortable viewing angle.

•

2. Connect AC Power

Plug the AC adapter into your notebook.

•

Plug the power cord into the AC adapter.

•

Connect the power cord to an electrical outlet.

•

3. Connect to Internet or Network

Connect the Ethernet cable to the LAN jack on your notebook and

•

to a wall jack or to an Ethernet router.

Important:

During the setup procedure, do not disconnect the power supply,

•

press any buttons, or use any peripheral devices such as a

remote control.

•

You should not attach any external devices and do not put a DVD/CD in

your drive until you have gone through the initial power on sequence.

4. Booting the System

Press the Suspend/Resume/Power button (above the keyboard) to

•

turn on the notebook. When you do this for the first time, it will display

a Fujitsu logo on the screen. If you do nothing the system will load

the operating system, and then the Windows Welcome will begin.

5. Installing Click Me!

Check to be sure the WLAN switch is on.

•

For Genuine Windows Vista

®

:

In addition to an icon on the

desktop, a dialog box will automatically open that prompts

you to run Click Me!. If you choose not run ClickMe! at this

time, the ClickMe! icon will remain on your desktop.

When you click the Click Me! icon, your system will automatically

•

build the icon tray in the bottom right of the screen. These icons

provide links to utilities that you will frequently access.

•

For the latest 64-bit drivers, please go to http://www.fujitsu.com/us/

support/ and follow the links to the downloads. Fujitsu Driver Update

(FDU) will be listed with the 64-bit downloads for each model.

If the FDU Icon is missing from Windows taskbar notification

•

area, please download and install FDU package from the support

website. This application will keep your notebook up to date with

the latest released drivers.

6. Register

For Genuine Windows Vista®:

Accept the Microsoft

•

®

Windows

®

Licensing Agreement and the

Fujitsu End User License Agreement to proceed.

Select your User ID and Password during the “Welcome Screen.”

•

•

Keep a record of your User ID and password stored in a secure place.

•

THE SCREEN WILL GO DARK FOR APPROXIMATELY TWO MINUTES.

Do not attempt to turn power on or off during this stage.

•

LEFT PANEL

BOTTOM PANEL

RIGHT PANEL

BACK PANEL

“Click Me!”

For

Additional

Utilities

Initial Start Up

What’s in the Box

Check to see that all of the following items are in the box:

❏

LifeBook notebook

❏

Microsoft® associated product materials

❏

Lithium ion battery, pre-installed

❏

Microsoft® application CDs

❏

AC adapter with power cord

❏

End User License Agreement

❏

Drivers and Applications Restore (DAR) disc

❏

Genuine Windows Vista® recovery

❏

International Limited Warranty

and utility disc

and Registration booklet

❏

Roxio Creator LJ disc

Depending upon your configuration, the following items may also be shipped with your notebook:

7. Registering Your LifeBook notebook

Register your notebook with Fujitsu Service and Support via our

•

website at us.fujitsu.com/computers.

You will need to be set up with an Internet Service Provider (ISP)

•

to register online.

8. Install Additional Software

The application discs that came with your notebook are

•

pre-installed. The discs are for backup only.

Close any open programs, applications or utilities.

•

Insert software application disc into media drive.

Open the application folder, select the set-up icon,

•

and load desired software.

Restart your computer.

•

9. If you purchased the TV Tuner Option

Please see the TV Tuner User’s Guide for detailed instructions.

•

10. Access your User’s Guide

To take advantage of all the features of your new Fujitsu LifeBook

•

notebook, it is highly recommended that you read your electronic

User’s Guide. It contains important detailed information about

your new computer. You can access your User’s Guide by

selecting its icon from the screen desktop. You will need

to be connected to the Internet

11. Restoring your System

If the need arises, you can safely recover back to the factory image

•

by following a straight-forward procedure which comes with your

recovery disc.

Headphone Jack

Microphone Jack

DC-In Jack

ExpressCard Slot

ExpressCard Eject

Button

Optical Drive

Release Button

PC Card Slot

PC Card Eject Button

Emergency Optical

Tray Release

Optical Drive

IEEE 1394 Port

Gigabit LAN (RJ-45) Jack

Air Vents

USB Ports

Right Panel Wireless LAN/UWB/Bluetooth

On/Off Switch

Opening

the display

panel

Place the color lid on your notebook, by aligning

each hook with its corresponding hinge.

If you purchased a Color Lid for notebook

Attach the other hooks one by one in the direction

of the arrows.

Note: The system shown is for illustration purposes

only. Your model may look different.

Hinges

LAN Jack

Power/Suspend/

Resume Button

Power Indicator

Glows blue when your system is turned on.

Battery charge/DC-In Indicator

Orange, solid: AC adapter and battery are

available and system is charging.

Green, solid: AC adapter and battery are

available and system is fully charged, or

AC adapter is plugged in but battery

is not installed.

Orange, blinking: AC adapter and battery

are available and waiting to charge battery

(battery is out of thermal range).

Off: AC adapter is not plugged in.

Battery Level Indicator

Green, solid: Battery is between 51%

and 100% charged.

Orange, solid: Battery is between 13%

and 50% charged.

Red, solid: Battery is 12% or

less charged.

Orange, blinking: Blinks during battery

status measurement (Four seconds

after the battery is installed).

Red, blinking: There is a problem

with the battery.

Off: There is no battery installed

or the battery has no charge.

Hard Drive/Optical Drive

Access Indicator

Glows green when your internal hard drive

is being accessed. Note that flickering

is normal.

Number Lock (NumLk) Indicator

Glows when the integral keyboard is

set in ten-key numeric keypad mode.

Caps Lock Indicator

Glows when your keyboard is

set to type in all capital letters.

Scroll Lock (ScrLk) Indicator

Glows when your scroll lock is active.

Common Indicators

Status Display Panel

The Status Indicators represent specific components

of your Fujitsu LifeBook notebook. The LEDs below

each symbol tell you how each of those components

are operating.

Memory Stick/SD Card Slot

Wireless LAN/Bluetooth/

UWB/On/Off Switch

E-SATA Port

USB 2.0 Ports

Air Vents

HDMI Port

External Video Jack

Anti-Theft Lock Slot

**Dust Filter

Memory Upgrade

Compartment

Lithium ion

Battery Bay

Controls, Connectors,

and Access Points

Power/Suspend/Resume

Button

Status Indicator Panel

Gesture Enabled

Touchpad Pointing

Device

Fingerprint Recognition

Sensor*

LifeBook Application Panel

with Support Button

Display Panel

Stereo Speaker

Stereo Speaker

*Optional items

** Filter should be removed and cleaned periodically.

Keyboard

Digital Microphone*

Web Camera*

The Lithium ion battery is not charged upon purchase.

Initially you will need to connect either the AC adapter

or the Auto/Airline adapter to use your notebook.

Be careful when you select the language.

The only way to change the language

is to do a recovery process.

If the battery pack is installed while the power is turned

off, the battery level indicator will display the charge

level for five seconds after it blinks orange.

If the AC adapter is not connected or the battery pack

is not fully charged when the computer is switched to

standby mode, the indicator will blink. The LED blinks

at the rate of one second on/six seconds off.

Batteries subjected to shocks, vibration or extreme

temperatures can be permanently damaged.

A shorted battery is damaged and must be replaced.

❏

ArcSoft WebCam Companion

❏

CyberLink PowerDirector™ DE,

CyberLink MakeDisc™

❏

CyberLink PowerDVD™,

CyberLink PowerDirector™ DE,

CyberLink MakeDisc™

(For Blu-Ray configuration)

❏

Remote Control, Remote Control manual, batteries, and USB IR receiver

(for Genuine Windows Vista® Home Premium Operating System only)

❏

ExpressCard Hybrid (Digital/Analog) TV Tuner (For Genuine Windows Vista®

Home Premium Operating System only)

❏

SnapCap Cover

Fujitsu A6220 A6220 Getting Started Guide

Fujitsu A6220 - LifeBook - Core 2 Duo 2.13 GHz Manual

Fujitsu A6220 manual content summary: