Fujitsu BX630 Operator Manual

Fujitsu BX630 - PRIMERGY - S2 Dual Manual

Get Fujitsu BX630 - PRIMERGY - S2 Dual PDF manuals and user guides View all Fujitsu BX630 manuals
Add to My Manuals
Save this manual to your list of manuals

Fujitsu BX630 manual content summary:

  • Fujitsu BX630 | Operator Manual - Page 1
    PRIMERGY BX630 S2 Scalable Server Blade Operating Manual Edition October 2008
  • Fujitsu BX630 | Operator Manual - Page 2
    Your feedback helps us optimize our documentation to suit your individual needs. Feel free to send us your comments by e-mail to [email protected]. Certified documentation according to DIN EN ISO 9001:2000 To ensure a consistently high quality standard and user-friendliness, this documentation
  • Fujitsu BX630 | Operator Manual - Page 3
    the Server Blade in the Basic Unit 24 4.4 Connecting Devices 28 5 Installation and Operation 31 5.1 Control and Connection Panel 32 5.2 Switching the Server Blade On/Off 35 5.3 Configuring the Server Blade 35 5.4 Updating the Firmware (BIOS and BMC 38 BX630 S2 Operating Manual
  • Fujitsu BX630 | Operator Manual - Page 4
    59 Security menu 60 Server menu 63 CPU Status 65 Memory Status 67 Console Redirection 69 Boot menu 71 Exit menu 72 7 Troubleshooting and Tips 73 8 Hot-plug components 75 8.1 Hot-plug disk drives 75 8.2 Handling hard disk drives and HDD modules 77 8.3 Installing/removing
  • Fujitsu BX630 | Operator Manual - Page 5
    Channel (FC) connection. Two BX630 S2 dual-socket server blades can be connected to form a quad-socket server blade with 16 processor cores. Dual-socket server blade Figure 1: PRIMERGY BX630 S2 configurations Quad-socket server blade The PRIMERGY BX630 S2 scalable server blade is designed for the
  • Fujitsu BX630 | Operator Manual - Page 6
    you need to put your PRIMERGY BX630 S2 server blade into operation. The information in this manual refers to the BX630 S2 dual-socket server blade. How to connect two BX630 S2 dual-socket server blades to form a quad-socket server blade is described in the Options Guide. For a brief overview of the
  • Fujitsu BX630 | Operator Manual - Page 7
    Manual "Guarantee" - Manual "Ergonomics" - Manual "Returning used devices" - Flyer "Helpdesk" - Operating Manual for PRIMERGY BX630 S2 Scalable Server Blade - Options Guide for PRIMERGY BX630 S2 Scalable Server Blade I PRIMERGY manuals http://manuals.ts.fujitsu.com. The PRIMERGY server documentation
  • Fujitsu BX630 | Operator Manual - Page 8
    only processors of the Opteron 83xx MP series are allowed. For upgrading processors see the Options Guide; for exchanging processors see the Service Supplement. Memory The BX630 S2 dual-socket server blade has eight memory slots. Each processor is assigned four memory slots. Two memory slots make up
  • Fujitsu BX630 | Operator Manual - Page 9
    10-Gbit switch blade 10/2. For more information see the operating manual for the basic unit. I You must not install server blades with different I/O modules in the same BX600 S2 or BX600 S3 basic unit. How to install I/O modules later is described in the Options Guide. BX630 S2 Operating Manual 9
  • Fujitsu BX630 | Operator Manual - Page 10
    Fujitsu Technology Solutions analyzes and monitors all components that are important for system reliability. The onboard SAS RAID controller supports allows the management of all PRIMERGY servers in the network via a central console. ServerView supports the following functions: ● Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 11
    support PRIMERGY servers have a service-friendly, modular architecture, thus enabling quick and simple maintenance. The flash-EPROM program supplied with the utilities from Fujitsu Technology Solutions allows fast BIOS updating via the USB interface. The two redundant hot-pluggable management blades
  • Fujitsu BX630 | Operator Manual - Page 12
    Notational conventions Preface 1.4 Notational conventions The following notational conventions are used in this manual: Text in italics "Quotation marks" Ê V CAUTION! I indicates commands or menu loss of data. indicates additional information, notes and tips. 12 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 13
    Safety) Electromagnetic Compatibility 2004/108/EC Certification Product safety Global Europe Germany USA/Canada Japan China/Taiwan CB ENEC GS, CE CSAUS / CSAC VCCI BSMI BX630 S2 Operating Manual 13
  • Fujitsu BX630 | Operator Manual - Page 14
    and plugs) 43 mm (quad-socket server blade: 86 mm; 1 or 2 slots in the basic unit) Weight Max. 6 kg (quad-socket server blade: 12 kg). Ambient conditions Environment class 3K2 35 °C -20 °C .... 60 °C 10%...85% Condensation during operation must be avoided! 14 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 15
    This chapter provides an overview of the steps you must perform to install your PRIMERGY BX630 S2 scalable server blade in your basic unit. The links take you to the sections with more detailed server) are available but the requirements for cloning are not met. BX630 S2 Operating Manual 15
  • Fujitsu BX630 | Operator Manual - Page 16
    DVD. For how to clone server blades see the RemoteDeploy manual (a PDF file is available on the PRIMERGY ServerBooks DVD). For information on installing and operating the PRIMERGY BX600 S2 or BX600 S3 basic unit, see the operating manual of your basic unit. 16 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 17
    If you have any questions, please contact your sales outlet or the Fujitsu Technology Solutions customer service center. V CAUTION! The activities described in this manual should only be performed by engineers, service personnel or technical specialists. Equipment repairs should only be performed by
  • Fujitsu BX630 | Operator Manual - Page 18
    authorities. ● Replace the lithium battery on the system board only as described in the Options Guide. ● All batteries containing pollutants are marked with a crossed-out garbage can accompanied by the else, you should also give them the corresponding documentation. 18 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 19
    of electrostatic charge. I For a detailed description of how to handle ESD components, see the relevant European or international standards (EN 61340-5-1, ANSI/ESD S20.20). BX630 S2 Operating Manual 19
  • Fujitsu BX630 | Operator Manual - Page 20
    product design and development This product has been designed in accordance with the Fujitsu Technology Solutions standard for "environmentally friendly product design and development". This means heavy metal that causes them to be categorized as containing pollutants: 20 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 21
    to you. Further information can be found at www.ts.fujitsu.com/recycling.. Details regarding the return and recycling of devices and Returning used devices" manual, via your local Fujitsu Technology Solutions branch or from our recycling center in Paderborn: Fujitsu Technology Solutions Recycling
  • Fujitsu BX630 | Operator Manual - Page 22
  • Fujitsu BX630 | Operator Manual - Page 23
    you observe the safety notes in the chapter Important notes. The server blade must not be exposed to extreme environmental conditions (see "Ambient conditions" blade. If the delivery is damaged or does not match the delivery note, contact your supplier immediately! BX630 S2 Operating Manual 23
  • Fujitsu BX630 | Operator Manual - Page 24
    the configuration, the PRIMERGY BX630 S2 Scalable Server Blade occupies one or two of the ten slots in the PRIMERGY BX600 S2 or BX600 S3 basic unit. This section describes how to install the BX630 S2 dualsocket server blade in the basic unit.The BX630 S2 quad-socket server blade is installed in the
  • Fujitsu BX630 | Operator Manual - Page 25
     ! Figure 3: Removing the dummy module for a server blade Ê Undo the locking mechanism of the handles by pressing the of the slot (3). V CAUTION! Keep the dummy module for future use. If a server blade is removed again and not replaced with a new one, the dummy module must be reinstalled because
  • Fujitsu BX630 | Operator Manual - Page 26
    the top. Ê Undo the locking mechanism of the 1 handles of the server blade by first pressing the green inside touch points of the two handles (1) at the position and push the server blade as far as possible into the slot. 1 2 Figure 4: Inserting the server blade 26 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 27
    the server blade Remove the server blade in the same way as the dummy module (see "Removing the Dummy Module" on page 24). V CAUTION! If a server blade has been removed and no new blade is installed in its place, you must install a dummy module in the empty slot. BX630 S2 Operating Manual 27
  • Fujitsu BX630 | Operator Manual - Page 28
    to a SAN (optional, requires installation of an FC daughter card in the server blade, see Options Guide) For information on connecting external devices via the infrastructure modules of the BX600 S2 or BX600 S3 basic unit, see the basic unit operating manual. 28 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 29
    1 2 A Figure 6: USB/VGA connectionon on the BX630 S2 server blade and breakout cable The PRIMERGY BX630 S2 Scalable Server Blade has a USB/VGA connector on the front (A).. Connecting module of the basic unit, see the operating manual for your basic unit . BX630 S2 Operating Manual 29
  • Fujitsu BX630 | Operator Manual - Page 30
  • Fujitsu BX630 | Operator Manual - Page 31
    safety notes in the chapter "Important notes" on page 17. This chapter explains how to set up and operate the BX630 S2 scalable server blade once you have installed it in the PRIMERGY BX600 S2 or BX600 S3 basic unit. - The position and function of the elements on the control and connection panel of
  • Fujitsu BX630 | Operator Manual - Page 32
    Control and Connection Panel Installation and Operation 5.1 Control and Connection Panel 9 8 1 2 3 4 5 6 7 Figure 7: Control panel 32 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 33
    S2 or BX600 S3 basic unit is on (5 V standby voltage is present) and the server blade is switched off, the power_up command is sent to the management blade and the server blade button switches the keyboard, monitor and mouse to this server blade. 5 I/O status of the optional I/O module (green LED
  • Fujitsu BX630 | Operator Manual - Page 34
    Operation 6 NIC indicator (green LED) Dark: System or server blade is off and LAN interface is not active. Glows green: Existing Hard disk drive indicator (orange LED) Dark: No error Glows orange: Server blade is on and hard disk drive has an error. Flashes slowly Reconstruction (RAID
  • Fujitsu BX630 | Operator Manual - Page 35
    blades can be set up using one of the following methods: - Local installation with or without ServerView Installation Manager - Remote installation, see the section ServerView Installation Manager Remote Installation in the ServerView Installation Manager manual on the ServerBooks DVD. BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 36
    image repository to the relevant server blades (for further information see the RemoteDeploy manual on the ServerBooks DVD (version 5.210 or later)). I The optional RemoteDeploy software package can be obtained from the Fujitsu Technology Solutions customer service center (order number U15000-C286
  • Fujitsu BX630 | Operator Manual - Page 37
    blade. Ê In the BIOS setup menu select the Boot submenu and enable Boot from CDROM Drive. Ê Press [ESC] twice and select Exit Saving Changes from the Exit menu. Once the server blade has booted from the ServerView Installation Manager CD, the startup screen is displayed. BX630 S2 Operating Manual
  • Fujitsu BX630 | Operator Manual - Page 38
    the GlobalFlash manual. - Updating the firmware of the server blade from a USB stick. To update the firmware of the BX630 S2 Server Blade from a USB stick, proceed as follows: Ê Create a bootable USB stick using the selfextracting USB stick image you downloaded from http://download.ts.fujitsu.com
  • Fujitsu BX630 | Operator Manual - Page 39
    blade. I The scope of the displayed BIOS parameters may differ depending on the configuration. The server blade [46] System Date [46] Sync RTC with Mgmt. Blade [46] POST Errors [46] SM Error Halt [47 51] Onboard USB Controller [51] USB BIOS Legacy Support [51] Master HD Controller [51] Slave HD
  • Fujitsu BX630 | Operator Manual - Page 40
    ID [58] Sensor No.[58] Sensor Type [Units] [58] Sensor Value[58] Sensor Value (max)[58] Sensor Value (min) [58] Entity ID [58] 40 Operating Manual BIOS Setup BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 41
    [67] Memory Scrubbing [67] SW Mem Hole Remap [68] DRAM Bank Interleave [68] Node Interleave [68] Memory on Master Board [68] CPUn (1-4) - DIMMm (1-7) + DIMMm+1 (2-8) [68] BX630 S2 Operating Manual 41
  • Fujitsu BX630 | Operator Manual - Page 42
    Rate [69] Protocol [70] Flow Control [70] Console Connection [70] Mode [70] # of video pages to support [70] Boot - System start Boot priority order [71] Excluded from Boot order [72] Exit - Save settings and terminate as the individual menus and possible settings. 42 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 43
    BIOS Setup Entering the BIOS Setup 6.1 Entering the BIOS Setup Ê Start the server blade (cold or warm start). The subsequent procedure depends on the current setting of the Boot . The Main menu opens and, if applicable, you must enter and confirm the Setup password. BX630 S2 Operating Manual 43
  • Fujitsu BX630 | Operator Manual - Page 44
    shows all the keys you can use to navigate and change settings in the BIOS Setup. [F1] Function key for displaying additional information 44 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 45
    the BIOS Setup. [F10] Save the changed values and quit the BIOS Setup. Information area (4) The information area displays brief information on the selected parameter. BX630 S2 Operating Manual 45
  • Fujitsu BX630 | Operator Manual - Page 46
    is empty and needs to be replaced. Sync RTC with Mgmt. Blade Switches synchronization of the real-time clock with the time of the management blade on (Enabled) or off (Disabled). POST Errors Defines whether the system and the system is stopped after the self-test. 46 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 47
    when the BIOS Setup is called during the POST (Enabled) or not (Disabled). Base Memory / Extended Memory Indicates the size of the available main memory. BX630 S2 Operating Manual 47
  • Fujitsu BX630 | Operator Manual - Page 48
    Power On/Off Calls a submenu for setting the power-on and power-off options of the server blade (see section "Power On/Off menu" on page 54). IPMI Calls a submenu with the settings whether the configuration data is reinitialized when the server blade is started. 48 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 49
    No. You must enter the configuration data of non-plug&play components manually. No After the server blade is started, the plug&play functionality initializes the installed boards and drives . I For compatibility reasons, some operating systems require version 1.1. BX630 S2 Operating Manual 49
  • Fujitsu BX630 | Operator Manual - Page 50
    configuration with an available combination of address and interrupt. Disabled The interface is disabled. Enabled User-configured. This setting requires the manual configuration of the base I/O address and the IRQ in an extra line. OS Controlled Operating system configuration. 50 Operating
  • Fujitsu BX630 | Operator Manual - Page 51
    system board is Enabled or Disabled. USB BIOS Legacy Support Defines whether the USB keyboard and mouse emulation is blade. Enabled The SAS controller is enabled. Disabled The SAS controller is disabled. I In a dual-socket server blade, this parameter is not interpreted. BX630 S2 Operating Manual
  • Fujitsu BX630 | Operator Manual - Page 52
    module or of the slave module of a quad-socket server blade is enabled (Enabled) or not (Disabled). I In a dual-socket server blade, the Slave Daughtercard parameter is not interpreted. Remote Boot Defines for remote control of the system is Enabled or Disabled. 52 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 53
    is also known as the "multimedia timer". Enabled The operating system can use the timer. Disabled The timer is not visible to the operating system. BX630 S2 Operating Manual 53
  • Fujitsu BX630 | Operator Manual - Page 54
    system is restarted due to a power failure. Always Off The system switches on, checks its current state (i.e. initializes itself) and switches off again. 54 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 55
    its current state and returns to the state it was in before the power failure (ON or OFF). Disabled The system does not switch on. BX630 S2 Operating Manual 55
  • Fujitsu BX630 | Operator Manual - Page 56
    be overwritten or not. Overwrite If the system event log is full, the oldest entries in each case are overwritten by new entries. 56 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 57
    Record ID Identifier of the sensor data record Entity ID Module to which the sensor belongs Entity Inst Number of the sensor within the module BX630 S2 Operating Manual 57
  • Fujitsu BX630 | Operator Manual - Page 58
    (min) Minimum permissible sensor value LAN Settings Opens the submenu for the iRMC LAN settings (see section "IPMI LAN parameters" on page 59). 58 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 59
    LAN parameters Advanced menu Figure 15: IPMI LAN Settings menu DHCP Defines whether DHCP support for the iRMC is Enabled or Disabled. Using the DHCP (Dynamic Host Configuration Protocol the gateway address of the system's LAN board, using numeric characters only. BX630 S2 Operating Manual 59
  • Fujitsu BX630 | Operator Manual - Page 60
    , open the password definition window, enter the current password and press Enter three times. I Deleting the supervisor password also deletes the user password. 60 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 61
    user password. A prompt to enter a password is not displayed. Setup Prompt Defines whether the Setup prompt is displayed during system start (Enabled) or not (Disabled). BX630 S2 Operating Manual 61
  • Fujitsu BX630 | Operator Manual - Page 62
    Security menu BIOS Setup Flash Write Defines whether the system BIOS is write-protected. Enabled The system BIOS can be written to or deleted. Disabled The system BIOS cannot be written to or deleted. 62 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 63
    ) Defines the delay of the system restart after a shutdown due to an error (1 - 30 minutes). The restart occurs after the set waiting time has elapsed. BX630 S2 Operating Manual 63
  • Fujitsu BX630 | Operator Manual - Page 64
    (see section "Memory Status" on page 67). Console Redirection Opens a submenu for setting up terminal communication (see section "Console Redirection" on page 69). 64 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 65
    used when the system is started. Also if four CPUs are installed and none of them are set to Enabled, the first CPU is used. BX630 S2 Operating Manual 65
  • Fujitsu BX630 | Operator Manual - Page 66
    Server menu BIOS Setup Even if only one CPU is installed, the status indicators are displayed for all possible CPUs. If Disabled is set for all the CPUs, the system still starts with one CPU. Re-enable Failed CPUs Resets all CPUs flagged as Failed to Enabled. 66 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 67
    be inappropriate or incorrect system environment specifications. Enabled One-bit memory errors are corrected. Disabled One-bit errors are not corrected. System performance is enhanced. BX630 S2 Operating Manual 67
  • Fujitsu BX630 | Operator Manual - Page 68
    automatically written to the system event log each time the system is started. Disabled The memory module is not used by the system. 68 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 69
    server. 300, 1200, 2400, 9600, 19.2K, 38.4K, 57.6K, 115.2K The data is transferred to the terminal at the selected transfer rate. BX630 S2 Operating Manual 69
  • Fujitsu BX630 | Operator Manual - Page 70
    the same on both the terminal and the server. The protocols differ in the supported key sequences and character sets and whether they can display color or only black . # of video pages to support Defines the number of video pages to allocate for console redirection. 70 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 71
    combination [Shift][1]. A locked device is flagged with an exclamation mark at the beginning of the line. - Use the [1] - [4] keys to load the default boot order. BX630 S2 Operating Manual 71
  • Fujitsu BX630 | Operator Manual - Page 72
    default values. Load Previous Values Resets all the parameters to the values that were in effect when the BIOS Setup was called up. 72 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 73
    to correct the problem, proceed as follows: Ê Make a note of the steps you have taken and the situation in which the fault occurred. Also make a note of the error messages displayed. Ê Switch off the defective server blade or the system. Ê Contact customer service. BX630 S2 Operating Manual 73
  • Fujitsu BX630 | Operator Manual - Page 74
  • Fujitsu BX630 | Operator Manual - Page 75
    procedure is described in the Options Guide or the Service Supplement and must only be performed by qualified staff. 8.1 Hot-plug disk drives In a PRIMERGY BX630 S2 dual-socket server blade, you can install one or levels, see the documentation for the RAID controller. BX630 S2 Operating Manual 75
  • Fujitsu BX630 | Operator Manual - Page 76
    ". 3 Handle for engaging and disengaging the hard disk module 4 Locking button 5 Indentation for a sticker with the current drive identifier 6 Dummy module 7 Locking tabs 76 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 77
    or to total corruption of the hard disk drive. Observe the following rules to prevent such problems occurring: ● Only store and transport HDD modules within the limits stipulated in the specification. ● large surface facing downwards to prevent it from tipping over. BX630 S2 Operating Manual 77
  • Fujitsu BX630 | Operator Manual - Page 78
    comply with EMC (electromagnetic compatibility) regulations and cooling and fire protection requirements. Make sure that the dummy module engages properly in the bay. 78 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 79
    disk module 2 1 Figure 25: Unlocking a 2.5-inch hard disk module - Press the green locking lever to the left (1) and swivel the locking handhold to the front (2). BX630 S2 Operating Manual 79
  • Fujitsu BX630 | Operator Manual - Page 80
    a disk array which is operating at RAID level 1. An HDD module can only be replaced during operation in conjunction with a corresponding RAID configuration. 80 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 81
    cooling, to comply with EMC regulations (regulations regarding electromagnetic compatibility), and for protection against fire. Ensure that the dummy module engages correctly in the slot. BX630 S2 Operating Manual 81
  • Fujitsu BX630 | Operator Manual - Page 82
  • Fujitsu BX630 | Operator Manual - Page 83
    Basic Input-Output System CD Compact Disk COM Communication CPU Central Processing Unit DBMS Database Management System DC Dual Core DDR Double Data Rate (RAM) DIMM Dual Inline Memory Module DVD Digital Versatile Disk ECC Error Correcting Code EDC Error Detection Code BX630 S2 Operating Manual 83
  • Fujitsu BX630 | Operator Manual - Page 84
    I/O Input/Output ID Identification IDE Integrated Drive Electronics IP Internet Protocol iSCSI Internet Small Computer System Interface over IP LAN Local Area Network 84 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 85
    LCD Liquid Crystal Display LED Light-Emitting Diode MRL Manually Retention Latch NIC Network Interface Card NMI Non Maskable Interrupt PCI Peripheral Component SAN Storage Area Network SAS Serial Attached SCSI SATA Serial Advanced Technology Attachment BX630 S2 Operating Manual Abbreviations 85
  • Fujitsu BX630 | Operator Manual - Page 86
    Abbreviations SCA Single Connector Attachment SCSI Small Computer System Interface SCU Server Configuration Utility SFP Small Form Factor Pluggable TOE TCP/IP Offload Engine USB Universal Serial Bus VGA Video Graphics Adapter VPD Vital Product Data WOL Wakeup on LAN 86 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 87
    CPU 8 D data manipulation 5 delivery note 23 disposal, devices 21 dummy module install 24 server blade 24 dummy module, hard disk module 78 dummy module, HDD module 81 E ECC 10 electrical 77 install 75 install/remove 79 module frame 75, 79 replacing online 81 BX630 S2 Operating Manual 87
  • Fujitsu BX630 | Operator Manual - Page 88
    13 saving energy 20 security functions 5 server blade ambient conditions 14 compliance standards 13 control 14 weight 14 server management 10 ServerView 10 supported functions 10 ServerView Installation Manager 11 reference troubleshooting and tips 73 type label 23 88 Operating Manual BX630 S2
  • Fujitsu BX630 | Operator Manual - Page 89
    U unpacking system 23 update BIOS 38 BMC 38 firmware 38 USB/VGA connector 34 V ventilation space 14 W weight 14 Index BX630 S2 Operating Manual 89
  • Fujitsu BX630 | Operator Manual - Page 90
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
PRIMERGY BX630 S2
Scalable Server Blade
Operating Manual
Edition October 2008