Fujitsu P1620 P1620 Getting Started Guide

LifeBook Security/Application

Panel Buttons

Keyboard

Power/Suspend/Resume Button

Status Indicator

Panel

Quick Point

Pointing Device

Display Panel

Display Panel Latch

Built-in Microphone

Fingerprint Sensor

Speaker

Status Indicator

Panel

DC Power Jack

Microphone Jack

Pen/Pen Holder

Secure Digital (SD) Card Slot

Headphone Jack

USB 2.0 Ports

PC Card Slot

PC Card Eject Button

Battery Latches

WLAN/Bluetooth

On/Off Switch

Air Vents

Anti-Theft Lock Slot

External Video Port

(behind cover)

Modem (RJ-11) Port

LAN (RJ-45) Port

Top Latch

Bottom Latch

Display Side

ROTATE THE SYSTEM DISPLAY ONLY IN THE DIRECTION

INDICATED IN THIS PROCEDURE.

TURNING THE DISPLAY IN THE INCORRECT DIRECTION COULD

DAMAGE THE HINGE.

IN THE FOLLOWING STEP, BE SURE TO POSITION THE DISPLAY

PERPENDICULAR TO THE KEYBOARD, OTHERWISE THE KEY-

BOARD OR DISPLAY COVER COULD GET SCRATCHED.

LifeBook Security/

Applications Panel

The six buttons are located on

the bottom left-hand side of the

display when it is configured

as a notebook.

Four of the buttons have secondary

functions. To activate secondary

functions, the Function (Fn) Button

should be pressed first and then

the application button. Be sure and

see your User’s Guide on how to

set up and use all the features of

the Security Panel.

Caution: Your system is

configured with Trusted

Platform Module (TPM)

Before you activate TPM, be sure

you fully understand how it works

by following the directions included

on the TPM applications CD. If you

choose to enable TPM, your TPM

password will be critical to the

operation of your computer and

MUST be remembered.

Drivers

Look for the latest drivers on the

Drivers and Applications Restore

CD. Right-click the FDU icon and

select “update”, or download

them at us.fujitsu.com/computers.

This convenient guide will lead you through the start-up

process and will also offer some valuable tips.

4. Booting the System

Press the Suspend/Resume/Power button (above the keyboard) to

•

turn on the notebook. When you do this for the first time, it will display

a Fujitsu logo on the screen. If you do nothing the system will load

the operating system, and then the Windows Welcome will begin.

5. Register

For Genuine Microsoft

®

Windows

®

XP:

After the operating system has initialized, enter the information

•

as prompted to personalize your notebook and configure your

modem to dial.

For Genuine Windows Vista™:

Accept the Microsoft

•

®

Windows

®

Licensing Agreement and the

Fujitsu End User License Agreement to proceed.

Select your User ID and Password during the “Welcome Screen.”

•

•

Keep a record of your User ID and password stored in a secure place.

•

THE SCREEN WILL GO DARK FOR APPROXIMATELY TWO MINUTES.

•

DO NOT ATTEMPT TO TURN POWER ON OR OFF DURING THIS STAGE

.

6. Registering Your LifeBook notebook

Register your notebook with Fujitsu Service and Support via our

•

website at us.fujitsu.com/computers.

You will need to be set up with an Internet Service Provider (ISP)

•

to register online.

7. Installing Click Me!

Check to be sure the WLAN switch is on.

•

For Genuine Microsoft

®

Windows

®

XP:

The first time you boot up

your system, you will see an icon called Click Me! in the Start menu.

For Genuine Windows Vista™:

In addition to an icon on the

desktop, a dialog box will automatically open that prompts you

to run Click Me!. If you choose not run ClickMe! at this time,

the ClickMe! icon will appear on your desktop.

When you click the Click Me! icon, your system will automatically

•

build the icon tray in the bottom right of the screen. These icons

provide links to utilities that you will frequently access.

8. Convert to Tablet Configuration

Open notebook and lift display so it is perpendicular to keyboard

•

Rotate display 180 degrees (either direction)

•

Carefully fold display down onto keyboard

•

Push latch down towards display

•

Reverse this procedure to return to notebook configuration.

•

Be sure to rotate display in opposite direction.

1. Open the Display Panel

Ensure that your LifeBook is on a hard level surface and that

•

the air vents are not blocked.

Lift the display, being careful not to touch the screen.

•

Adjust the display until it is at a comfortable viewing angle.

•

2. Connect AC Power

Plug the AC adapter into your notebook.

•

Plug the power cord into the AC adapter.

•

Connect the power cord to an electrical outlet.

•

3. Connect to Internet or Network

•

Connect either a phone cord to the modem port or an Ethernet

cable to the LAN port on your notebook and to a wall jack or to

an Ethernet router. (See back panel drawing for port locations.)

Important:

•

During the setup procedure, do not disconnect the power supply,

press any buttons, or use any peripheral devices such as a mouse,

keyboard, or remote control.

You should not attach any external devices and do not put a DVD/

•

CD in your drive until you have gone through the initial power

on sequence.

Power Indicator

The Power indicator symbol located on

the power button shows whether your

system is operational. When it is lit blue,

it means that there is power to your

computer and that it is ready for use.

Battery Level Indicator

Indicates whether the Lithium ion battery

is installed and charging, and how much

charge is available within the batteries.

Green: The battery is installed

and fully charged.

Amber: The battery is installed and is

approximately half charged.

Red: The battery charge is low and it

should be charged with an adapter

or replaced with a charged battery.

BATTERIES SUBJECTED TO SHOCKS,

VIBRATION OR EXTREME TEMPERATURES

CAN BE PERMANENTLY DAMAGED.

IF THERE IS NO BATTERY ACTIVITY

AND THE POWER ADAPTERS ARE NOT

CONNECTED, THE BATTERY LEVEL

INDICATORS WILL ALSO BE OFF.

Hard Drive Access Indicator

Lights green when your internal hard drive

is being accessed.

NumLk Indicator

Shows that the integral keyboard is set

in ten-key numeric keypad mode.

CapLock Indicator

Shows that your keyboard is set to type

in all capital letters.

ScrLk Indicator

Shows that your scroll lock is active.

Common Indicators

LEFT PANEL

BOTTOM PANEL

RIGHT PANEL

BACK PANEL

CLICK ME

“Click Me!”

(For

Additional

Utilities)

(FDU)

(For

Latest

Drivers)

Controls, Connectors,

and Access Points

Initial Start Up

Status Indicator Panel

The Status Indicator Panel is located above the

keyboard. Following are some common indicators.

The Lithium ion battery is not charged upon purchase.

Initially you will need to connect either the AC adapter

or the Auto/Airline adapter to use your notebook.

What’s in the Box

Check to see that all of the following items are in the box:

❏

LifeBook Notebook

❏

Drivers and Application Restore disk

❏

Lithium ion battery (installed)

❏

Pen

❏

AC adapter with power cord

❏

Recovery disc

Depending upon your configuration, the following may also be included:

❏

Additional lithium ion main battery

❏

Third party application disc(s)

❏

Port Replicator

9. Calibrate the Touch Screen

Note: Only use stylus tip for calibrating. Touching screen with

your fingers will require restarting calibration process.

Go to Start -> Control Panel. If you are not in Classic View,

•

select “Switch to Classic View” in the left panel.

•

Windows XP Tablet PC Edition: Double-click the Tablet and Pen

Settings icon and select the Settings tab .Windows XP Professional:

Double-click the Touch Panel icon and select the Calibration tab.

Windows Vista: Double-click the Tablet PC Settings icon and

select the General tab.

Click the [Calibrate] or [Calibrate Now] button.

•

Adjust the display of your notebook to a comfortable angle and

•

find the (+) symbol in the upper-left corner of the display.

Using the stylus, firmly touch the screen directly on the (+)

•

symbol. Lift the stylus from the screen and the target will

move to a different location on the screen.

Repeat step 4 until you have selected all of the (+) symbols.

•

Once you have selected all the symbols, press the [OK] button.

•

Touch the stylus to various points on the screen to verify that the

•

screen is correctly calibrated. If you are not satisfied with the

screen’s calibration, press the [Calibrate]) button to begin again.

10. Install Additional Software

Close any open programs, applications or utilities

•

Insert software application disc into media drive

•

Open the application folder, select the set-up icon,

•

and load desired software, as shown in the table.

Restart your computer.

•

11. Access your User’s Guide

To take advantage of all the features of your new Fujitsu LifeBook

•

notebook, it is highly recommended that you read your electronic

User’s Guide. It contains important detailed information about

your new computer. You can access your User’s Guide by

selecting its icon from the screen desktop.

Lithium ion

Battery

Air Vents

Port Replicator

Connector

Memory Upgrade

Compartment

Main Unit and

Configuration

Label

(approximate

location)

Latch

AC Adapter

AC Cable

DC Power Jack

DC Output

Cable

Power/Suspend/Resume

Button

Wireless

LAN

Switch

BUTTON

PRIMARY FUNCTION

1

Application A/

Page Down

2

Application B/

Page Up

3

Screen Rotation

4

Function

Selection

5

(Not

Enter Button/

numbered

Ctl-Alt-Del

on

button)

6

(Not

Backlight/

numbered

Application C

on

Button

button)

Fujitsu P1620 P1620 Getting Started Guide

Fujitsu P1620 - LifeBook - Core 2 Duo 1.2 GHz Manual

Fujitsu P1620 manual content summary: