Fujitsu PDS-4209 User Manual

Fujitsu PDS-4209 Manual

Get Fujitsu PDS-4209 PDF manuals and user guides View all Fujitsu PDS-4209 manuals
Add to My Manuals
Save this manual to your list of manuals

Fujitsu PDS-4209 manual content summary:

  • Fujitsu PDS-4209 | User Manual - Page 1
    MANUAL PDS4203W-H/PDS4203E-H 42" WIDE PLASMA manual carefully so that you know how to use the display correctly. Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions. Keep this manual
  • Fujitsu PDS-4209 | User Manual - Page 2
    GmbH of Werftstraße 20, D-40549 Düsseldorf, F. R. Germany Manufacturer: Shinjyo Fujitsu General Limited 702-3 Kanezawa Shinjyo-shi Yamagata Japan declares under our sole responsibility that the product, Type: 42" PLASMA DISPLAY Model Name: PDS4203W-H/PDS4203E-H to which this declaration relates are
  • Fujitsu PDS-4209 | User Manual - Page 3
    and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this installation, use and service. Please read these "Important Safeguards" carefully before use. - All the safety and operating instructions should be read
  • Fujitsu PDS-4209 | User Manual - Page 4
    service to qualified service personnel. - Unplug this product from the wall outlet and refer service to qualified service personnel under the following conditions: a) When the power following the operating instructions. Adjust only those controls that are covered by the Operation Manual, as an
  • Fujitsu PDS-4209 | User Manual - Page 5
    or other hazards. - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that products such as VCR's, and personal computers, you should turn off the power of this product for protection against electric shock. - Do not place
  • Fujitsu PDS-4209 | User Manual - Page 6
    input in addition to the video, S-video, and RGB. CONVENIENT POWER MANAGEMENT FUNCTION DPMS (Display Power Management Signaling) automatically minimizes power consumption. FIVE TYPES OF WIDE DISPLAY Five types of wide display are supported: WIDE 1, WIDE 2, ZOOM 1, ZOOM 2 and normal display (4:3). 6
  • Fujitsu PDS-4209 | User Manual - Page 7
    ENGLISH ACCESSORIES Checking Accessories Cable clamper × 2 USER'S MANUAL User's Manual × 1 Power cord PDS4203W-H × 3 PDS4203E-H × 1 Bracket × 2 (2 type) Remote controller × 1 Screw A (10 mm) Screw B (20 mm) Screw × 2 (2 type) AA battery × 2 Cable clampers • The accessory cable clampers are for
  • Fujitsu PDS-4209 | User Manual - Page 8
    the installation done by your product dealer. • When installing the display, refer to the installation manuals for the options. Further, be sure that the display does not lean to the side or backward. • Place the power cord and connection cables in a corner of the wall or floor so that they do not
  • Fujitsu PDS-4209 | User Manual - Page 9
    Power lamp 5 cm • When mounting the Plasmavision vertically, make sure that the power lamp is at the lower right. Notes • Do not display the same picture , so be certain to unplug the power cord and contact your product dealer. (See P44) • The plasma display panel has been built using extremely
  • Fujitsu PDS-4209 | User Manual - Page 10
    • Fasten the screws supplied with the desktop stand into their holes at the rear of the desktop stand. (2 holes) • For details, refer to P-42TT01 User's Manual for the desktop stand. Two places Screw B (20 mm) The screws are supplied with the desktop stand. 10
  • Fujitsu PDS-4209 | User Manual - Page 11
    OF PARTS AND THEIR FUNCTIONS Front view Bottom view ENGLISH Power lamp • Shows the power status, ON or OFF. • Lit (red)····Standby • Lit (green)····Power on • Blinking (red)····Internal abnormality. Be certain to unplug the power cord. Remote control receiver • Receives the signals from the
  • Fujitsu PDS-4209 | User Manual - Page 12
    on or off by the remote controller. When this switch is pressed again, the power is cut and power lamp Œ goes off. Power input terminal • Firmly insert the accessory power cord as far as it will go into the power input terminal. • Firmly push the power cord plug as far as it will go into the
  • Fujitsu PDS-4209 | User Manual - Page 13
    ENGLISH A Remote controller • POWER button P15 Switches the power on or off. • MODE button P15 Selects the input mode. • MENU button P20-39 For adjusting the picture and sound to your taste • WIDE button P16-19 For selecting the desired wide screen • VOLUME buttons P15 For adjusting the volume •
  • Fujitsu PDS-4209 | User Manual - Page 14
    NAMES OF PARTS AND THEIR FUNCTIONS Handling the remote controller Loading the batteries 1 2 3 Press on the cover and slide in the direction of the arrow. Load two AA batteries, taking care that the + and - ends face Close the cover until it clicks. the correct direction. Reception range of
  • Fujitsu PDS-4209 | User Manual - Page 15
    buttons to adjust the volume . + button····Raises the volume. - button····Lowers the volume. ∗ The current volume setting is memorized even when the power is switched off. Mode display • COMP.VIDEO stands for component video mode. • When the speaker setting (see p.21) is OFF, SPEAKER OFF will
  • Fujitsu PDS-4209 | User Manual - Page 16
    16:9 video compressed to horizontally wide 4:3 video Ordinary video (4:3 video) WIDE 1 • ZOOM 1 Appropriate for horizontally wide video software; a normal picture appears with the top, bottom, left, and right enlarged. Vertically wide video Horizontally wide video WIDE 2 ZOOM 1 • ZOOM 2 For
  • Fujitsu PDS-4209 | User Manual - Page 17
    , use NORMAL mode. • If the wide select function is used to display non-wide screen conventional (normal) 4:3 video software over the entire screen, the picture will be deformed with part of the edge not visible. • VIDEO mode is the generic term for VIDEO mode, S-VIDEO mode, and COMPONENT VIDEO mode
  • Fujitsu PDS-4209 | User Manual - Page 18
    VIEWING WIDE SCREEN (RGB MODE) SETTING THE DESIRED WIDE SCREEN SIZE 1 Press the WIDE button. The current viewing mode is displayed. Example: NORMAL 2 Use the WIDE button to select the desired screen size. Pressing the WIDE button moves the mode to the next item as below. NORMAL WIDE ∗ This
  • Fujitsu PDS-4209 | User Manual - Page 19
    ENGLISH WIDE SCREEN MODES (RGB MODE) • When the screen is vertically wide Vertically wide video WIDE Points about usage • Note that use of a wide select function to change the screen size or aspect ratio during commercial use or for public viewing in a coffee shop, hotel, or the like, may
  • Fujitsu PDS-4209 | User Manual - Page 20
    the ADJUST button moves the selection to the next item as below. ON···· The mode is displayed on the screen for a few seconds when the power is first switched on and when the mode is switched. OFF···The mode is not displayed. Example: When ON is selected ∗ To complete adjustments Press
  • Fujitsu PDS-4209 | User Manual - Page 21
    ENGLISH INTERNAL SPEAKER SETTING 1 Select COMMON SETTINGS from the VIDEO MENU screen. 1) Press the MENU button. 2) With the ADJUST button, select COMMON SETTINGS. 3) Set by pressing the SET button. COMMON SETTINGS can be set in the same way from any mode menu. Example: When COMMON SETTINGS is
  • Fujitsu PDS-4209 | User Manual - Page 22
    HANDY FUNCTIONS WHITE BALANCE SETTING 1 Select COMMON SETTINGS from the VIDEO MENU screen. 1) Press the MENU button. 2) With the ADJUST button, select COMMON SETTINGS. 3) Set by pressing the SET button. COMMON SETTINGS can be set in the same way from any mode menu. Example: When COMMON SETTINGS
  • Fujitsu PDS-4209 | User Manual - Page 23
    off, and the monitor goes on standby. This signal wait time can be set from 1 to 5 minutes in units of one minute. Also, the power management function can be switched off. (The factory setting is OFF.) This display has a five-language on screen menu. ENGLISH-A American English ENGLISH-B British
  • Fujitsu PDS-4209 | User Manual - Page 24
    the selection to the next item as below. Example: When BRIGHTNESS is selected 3 Adjust to the desired picture. button····Makes the picture brighter. button····Makes the picture darker. ∗ To adjust multiple items, repeat Steps 2 and 3. Example: When the button is pressed ∗ To complete adjustments
  • Fujitsu PDS-4209 | User Manual - Page 25
    tint can be adjusted. button: Makes the tint greener. button: Makes the tint more purple. SHARPNESS Picture sharpness can be adjusted. button: Makes a sharper picture. button: Makes a softer picture. Adjustment items • Pressing the SET button moves selection to the next item. • VIDEO mode is the
  • Fujitsu PDS-4209 | User Manual - Page 26
    SCREEN ADJUSTMENT (VIDEO MODE) EXAMPLE: ADJUSTING THE SCREEN VERTICAL POSITION 1 Select POSITION/SIZE from the VIDEO MENU screen. 1) Press the MENU button. 2) With the ADJUST button, select POSITION/SIZE. 3) Set by pressing the SET button. Example: When POSITION/SIZE is selected ∗ This
  • Fujitsu PDS-4209 | User Manual - Page 27
    ENGLISH ADJUSTMENT ITEM LIST (ADJUSTMENT CRITERIA) VERTICAL POSITION When too low····Adjust with the button. When too high····Adjust with the button. HEIGHT When too small····Adjust with the button. When too large····Adjust with the button. HORIZONTAL POSITION When too far left:····Adjust with the
  • Fujitsu PDS-4209 | User Manual - Page 28
    INPUT SOURCE ADJUSTMENTS (VIDEO MODE) EXAMPLE: SETTING COMPONENT VIDEO Setting must be done when connecting a color difference signal to the COMPONENT VIDEO terminal. 1 Select SOURCE from the VIDEO MENU screen. 1) In COMPONENT VIDEO mode, press the MENU button. 2) With the ADJUST button, select
  • Fujitsu PDS-4209 | User Manual - Page 29
    set. This setting switches the phase of the clamp pulse. The ADJUST button can be adjusted in the range from 0 through 4. Select so the optimum picture is attained. ∗ This setting can be done in COMPONENT VIDEO mode only. Adjustment items • Pressing the SET button moves selection to the next item
  • Fujitsu PDS-4209 | User Manual - Page 30
    Example: When GAMMA is selected ∗ This operation can also be done using the buttons on the Display's operation panel. 3 Select the desired picture. Select with the ADJUST button. MOTION Carries out automatic correction so that the video is optimum for viewing moving images. STILL Carries out
  • Fujitsu PDS-4209 | User Manual - Page 31
    ENGLISH OTHER ADJUSTMENT ITEMS GRADATION Gradation display can be selected to suit still or moving images. MODE1···· Carries out automatic correction so that the video is optimum for viewing moving images. MODE2···· Carries out automatic correction so that the video is optimum for viewing still
  • Fujitsu PDS-4209 | User Manual - Page 32
    When CONTRAST is selected ∗ This operation can also be done using the buttons on the Display's operation panel. 3 Adjust to the desired picture. button····Makes the contrast stronger. button····Makes the contrast weaker. To adjust another item, repeat steps 2 and 3. CONTRAST MENU RETURN SET NEXT
  • Fujitsu PDS-4209 | User Manual - Page 33
    ENGLISH VIDEO ADJUSTMENT ITEMS BRIGHTNESS Screen brightness can be adjusted. button: Makes the picture brighter. button: Makes the picture darker. BRIGHTNESS MENU RETURN SET NEXT ADJUST CONTRAST Screen contrast (difference between dark and light) can be adjusted. button: Makes the contrast
  • Fujitsu PDS-4209 | User Manual - Page 34
    SCREEN ADJUSTMENT (RGB MODE) EXAMPLE: ADJUSTING THE HEIGHT OF THE SCREEN 1 Select POSITION/SIZE from the RGB MENU screen. 1) Press the MENU button. 2) With the ADJUST button, select POSITION/SIZE. 3) Set by pressing the SET button. Example: When POSITION/SIZE is selected ∗ This operation can
  • Fujitsu PDS-4209 | User Manual - Page 35
    ENGLISH ADJUSTMENT ITEM LIST (ADJUSTMENT CRITERIA) VERTICAL POSITION HEIGHT When too low····Adjust with the button. When too high····Adjust with the button. The adjustment range is from -250 through +250. When too small····Adjust with the button. When too large····Adjust with the button. The
  • Fujitsu PDS-4209 | User Manual - Page 36
    INPUT SOURCE ADJUSTMENTS (RGB MODE) The Macintosh mode and the clamp pulse mode can be set for the input source, and the input signal can be confirmed. EXAMPLE: SETTING MACINTOSH MODE The Apple Macintosh has two dot clocks. If the display is partly cut or the video and the dot clock do not match,
  • Fujitsu PDS-4209 | User Manual - Page 37
    . This setting switches the phase of the clamp pulse. The ADJUST button can be adjusted in the range from 0 through 4. Select so tha optimum picture is attained. SIGNAL INFORMATION The sync signal information input from the RGB input terminal can be checked. MODE: Fixed mode No. (Mode Nos. are
  • Fujitsu PDS-4209 | User Manual - Page 38
    : When GRADATION is selected ∗ This operation can also be done using the buttons on the Display's operation panel. 3 Adjust to the desired picture. Select with the ADJUST button. MODE1: Carries out automatic correction so that the video is optimum for viewing moving images. MODE2: Carries out
  • Fujitsu PDS-4209 | User Manual - Page 39
    ENGLISH OTHER ADJUSTMENT ITEMS (ADJUSTMENT CRITERIA) GAMMA Dynamic GAMMA correction can be set. MOTION: Set for viewing moving images. STILL: Set for viewing still images. GRADATION Gradation can be set. MODE 1: Set for viewing moving images. MODE 2: Set for viewing still images. DOT CLOCK
  • Fujitsu PDS-4209 | User Manual - Page 40
    . For these signals, the desired screen can be adjusted according to the instructions on adjusting the screen. The Plasmavision can also store settings for five types 66.61 66.67 56.42 70.15 56.25 59.94 50.00 Supported signal Note1 When dedicated graphics board used VGA VGA 72 Hz VGA 75 Hz
  • Fujitsu PDS-4209 | User Manual - Page 41
    This is a dedicated PDS4203E-H AV terminal unit. Before attaching, pull out the power plug. P-42TE01-B ∗ When installing an optional product, follow the directions in the optional product user's or installation manual. The colors of the Plasmavision and optional products are slightly different
  • Fujitsu PDS-4209 | User Manual - Page 42
    sub 9-pin terminal Temperature: 0 to 40°C Humidity: 20 to 90 % Two cable clampers, power cord (PDS4203W-H × 3, PDS4203E-H × 1), one remote controller (P-42RM01-B), two AA batteries, one user's manual, two brackets (two types), two screws (two types) • Specifications and external appearance may be
  • Fujitsu PDS-4209 | User Manual - Page 43
    A 1995 1995 1995 1995 1995 1993 1993 1993 1995 Points about shipping The Plasmavision is a precision instrument, and requires dedicated packing materials for shipping. ∗ Use Fujitsu's packing materials only. Input signal Ground Hor. sync Vert. sync Ground 43 ENGLISH
  • Fujitsu PDS-4209 | User Manual - Page 44
    REPAIR If you think a malfunction may have occurred, check the following items. When this happens • The power does not come on. • The picture dose not appear. Check • Is the power cord disconnected? • Is a cable to other equipment disconnected? • The remote controller does not work. • Are the
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
USER’S MANUAL
PDS4203W-H/PDS4203E-H
42” WIDE PLASMA DISPLAY
Before using the display, read this manual carefully so that you know how to use the display correctly.
Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions.
Keep this manual where the user can see it easily.
Installation and removal require special expertise. Consult your product dealer for details
Contents
Page
Before Use
•
Safety Precautions
3-5
• Features
6
• Accessories
7
•
What You Should Know
8-9
•
Preventing Equipment from Falling
10
Usage
•
Names of
Parts and Their Functions
11-14
•
Basic Operations
15
•
Viewing Wide Screen (Video Mode)
16-17
•
Viewing Wide Screen (RGB Mode)
18-19
Handy Functions
•
On-Screen Display Setting
20
•
Internal Speaker Setting
21
•
WHITE BALANCE Setting
22
•
DPMS and Display Language Setting
23
Page
Adjustments
Video Mode
•
Video Adjustments
24-25
•
Screen Adjustments
26-27
•
Input Source Adjustments
28-29
•
Other Adjustments
30-31
RGB Mode
•
Video Adjustments
32-33
•
Screen Adjustments
34-35
•
Input Source Adjustments
36-37
•
Other Adjustments
38-39
Others
•
Personal Computers that Can be Connceted
40
•
Optional Products
41
• Specifications
42-43
•
Care and Maintenance
44
FUJITSU GENERAL LIMITED
ENGLISH